What did you do to your passat today?

[demented_irony]

Did you run a diesel filter on your Syncro? I couldn't get the diesel filter wedged in there for anything... do I need to pound a recess into the crossmember or something?

I removed the little bung on the bottom and never had a problem in my Syncro.

I always prefered the G60 Corrado filter, if only for the wrench bung on the end. Might have to see about ordering in one of those diesel filters next time.

The G60 filter is a waste of money, it's identical to the 4-cylinder filters except for the nut on the bottom.

Are there any perks to running a diesel filter as opposed to just a Fram? Fram filters are the only ones I've ever used and I've never had any problems with them.

Fram is absolute junk and should not be used in any vehicle. The OEM Mahle/Mann filters are like $5. The diesel filter is larger so total oil capacity is raised, and it filters better. The Fram filters do not have the proper pressure valves in them.

[csantimays]

[drive.euro]

Fram is absolute junk and should not be used in any vehicle. The OEM Mahle/Mann filters are like $5. The diesel filter is larger so total oil capacity is raised, and it filters better. The Fram filters do not have the proper pressure valves in them.

this is very true. I only have one on my car because it was bought for me when I was out of work. Beggers can't be choosers ya know. I have an oem one waiting to be put on. I didn't know about the diesel filter that's good to know.

[854door]

i shut my door and now it wont open from inside or out and then when i replaced the passenger handle with a new one now everything is all screwy really getting annoying

[max302]

ABS-less MC is in the ultrasonic tank, brake booster is fully prepped and painted, the stainless steel soft lines have arrived, and MK4 calipers are awaiting paint.

Brake upgrades very soon!

[drive.euro]

Found another vacuum hose unplugged . Now it runs not great but it runs.

[Slim4life]

Getting it ready for SOWO

[csantimays]

Getting it ready for SOWO

Leaving MD at 6am on Wednesday. See ya there!

[asstap94]

started to part out my b4. doing some bay work on my b3. if anyone needs 97 b4 vr sedan parts hit me up! located in glen burnie MD 21061
443 863 0522

[Slim4life]

started to part out my b4. doing some bay work on my b3. if anyone needs 97 b4 vr sedan parts hit me up! located in glen burnie MD 21061
443 863 0522

I need lots of stuff what color is it and if your going to sowo can you bring parts

[drive.euro]

Taped up a heater hose that fell into my fan. It didn't cut through it but it did shave a lil off. so I put some hose tape on for now.

[SilverstoneMKIV]

shaved hatch and all red tails are on
[IMG][/IMG]

[95econobox]

that looks good.

[asstap94]

I need lots of stuff what color is it and if your going to sowo can you bring parts

car is silver. and im not going to make it to sowo. im a professional tattoo artist and booked for awhile. gotta take care of my clients and make that money haha. hit me up tho. small parts i can ship 443 863 0522

[perickomx]

noticed that water pump and serpentine belt tensor are damaged

damn car ...but i love it.

[vaults]

Started working on blueprints today, there are no on the internet for some reason.
And the fourth adjustment to the center console finally did the job.

[izzo]

Started working on blueprints today, there are no on the internet for some reason.
And the fourth adjustment to the center console finally did the job.

See this: http://www.the-blueprints.com/bluepr...ars/vw/page/6/

One I pulled:

[vaults]

I know that database, did you find a high res B3 blueprint there, because I did not.

[izzo]

Nope... this is the closest to high-res that I can come up with:

[coolalex]

Got mad compliments on it.

Picked up a girl for a date. She says sexy car right away

Then she asks what kind it is. Volkswagen. "its really fast"

Needless to say, I threw her a bone.

Sent from my DROID RAZR using Tapatalk 2

[max302]

Pass gets the puss

Did you really trick her into believing that your car was fast?

[coolalex]

Pass gets the puss

Did you really trick her into believing that your car was fast?

Hahaha they love the sound of that vr6!



I llove instagram

[demented_irony]

I llove instagram

Because it makes pictures look like they were taken 80 years ago, then lost under water, then found, scanned, and posted online?

[drive.euro]

Gave her a bath for the first time after she sat for 2yrs. It took 3hrs 2 rags and a lot of water. The soap suds were a grayish green when I was done. Drove her home and realized my alternater needs to be replaced. Still need to give her another light wash so I can wax her (ran out of time). Damn yellow pollen. That **** gets everywhere and didn't want to come off. It had started growing.

[traffiK]

Finally got around to hooking up my sub that I've had sitting around for a while. Now, I just need to get new rear speakers.

[asstap94]

went to fix the rust spots on my trunk..... yeaaaaaaaaaah i have about 30 rust holes above the license plate. anyone got a b3 sedan trunk FS?

[IFlyGTI]

Tried to lube up my left rear regulator & even after I dumped a bunch of HHS in it, it still had this gawd-awful squeek goin' on. Time to start looking into a replacement. Have to check my parts car, then; who knows.

[petekrow]

replaced radiator, replaced crackpipe, housing (all the plastics), thermostat (for the stock 87), cleaned and painted fan shroud and replaced the fans, flushed system. removed all the ac junk, including ac condenser (needed to mod radiator to sit properly).

[vaults]

Finished first part of my blueprints


Fixed speaker in door and put door panel back on.

[B4 Slapshot]

Finished first part of my blueprints


Fixed speaker in door and put door panel back on.

Looks really good dude! Keep it up




Deleted Suitcase and Resonator. Proceeded to heargasm several times

[IFlyGTI]

Not today (more like last week actually) but I grabbed a fairly new main pump, pre-pump & injectors for the cool sum of $40.00. I love finding the packaging for parts in the trunk of a car at the local Pick-n-Pull. Even better was the fact that the main pump was sold by my store about a year ago. Just need to get off my butt & get it all installed.

[JonLott]

Finished rebuilding the top half of the motor a few weeks ago, got it in the car and drove it for about five days before I got the infamous "tapping"! Thought it was the lifters so pulled the intake and valve cover and found a few loose cam retainer nuts. Guess that wasn't my problem, because after a nice little autobahn run, it got a lot worse. Guess I will be looking at rod/crank bearings.

Anyway, today I towed it from my buddies house to my work. Feel better about it sitting on base while I wait on parts from the states!

This is definetely a love/hate relationship!

[B4 Slapshot]

Did This! A proper VR Exhaust Video

[vaults]

Got the door sills today, sills are real, logo is photoshoped.
Lets see how it turns out.

[izzo]

Got the door sills today, sills are real, logo is photoshoped.
Lets see how it turns out.

Are those Kamei? Mine had both the Passat and Kamei inscriptions etched: