I need a grab rail for my 07 Passat wagon, part number 1T0-827-547-L.
Any help? Local stealership is charging $160. Obviously looking to find one for less.
I have a question -
I have a 2010 Passat with the 6sp DSG transmission
I was reading about the DSG transmissions, and it looks like they came in two flavors - the 09G and 09M
From what I can find, the 09G is what my Passat has, curiously, the specs say that the 09G is rated to only 184 lbs-Ft. of torque whereas my car comes stock with 207
Is this wrong, right or am I way off. I checked my code sheet and don't see anything stating a 09G or 09M. I'm guessing it's the D6F code. If so, what are the specs of that transmission.
2010 Passat Comfort
Full Vag-Com Service for
I know this would be a pain, but is there any way to decode that options code sheet?
Damn, which one even says what color paint I have?
Also - trying to figure which fuse is my fuel flap and what else is on that circuit.
I keep getting a "Short to ground" code when I push my fuel flap button.
I bought a new actuator, but it didn't help.
It must be something else on that circuit as if it was a true "short" - it would be blowing the fuse. Instead it just doesn't work and throws a code. I've made a couple mods and have tried disconnecting them all, but nothing seems make a difference. The switch is fine and I've even traced the wires thru the transmission tunnel and haven't found a thing.
Thanks again - you are a wealth of knowledge and a great contributor to the Tex
2010 Passat Comfort
Full Vag-Com Service for
Greetings Parts guys!
I have a request, I may need to buy a few body panels...
2008 Passat 2.0T TSI
Right & Left Sides for these:
Turn Signal 'housing' the body/fiberglass/whatever that the turn signal sits inside of...
The body piece that sits next to the turn signal, a strange bump out that on my model does not look like it is a formed part of the bumper (heard that later models have this fused with the bumper)...
Appreciate the help!
On the diagram listed above, I'm looking for part #37 and #40 but can't find much info about them... any ideas?
Can someone give me a link to somewhere I can get the updated fuel cap from? Or even a part number would be great. I tried searching and even ECS didn't have what I was told to be the revised cap...the one ending in "G." Thanks
2006 Passat FSI 2.0T |Forge DV Spacer|Lowered on DG Springs|Electric Exhaust Cutout|Podi Stepper Boost Gauge|19" Gianelle Wheels|10" Kicker sub in custom box| iPad Mini Dash installed as headunit|5% Tint on sides, 30% on back window|Carbon fiber mirrors|Votex Roof Rack|Resonator Delete w/ Magnaflow tips|Colormatched Badgeless grill|OEM Audi S6 LED DRLs|Lip spoiler|Ceramic Brake Pads|Morimoto HIDs
I have an 07 4mo
I am installing Neuspeed sport springs soon. Maybe tomorrow.
I have the replacement bolts install kit.
Anything else critical to replace when doing this install?
I have read about a bushing or barring that might need to be replaced.
Can you give me part numbers and names please?
And classify it's importance of being replaced? (scale 1-10)
Do you know how they attach? I have read some different threads talking about having to modify the tabs on the front door pieces to make them fit and that you have to then put them on with adhesive tape. I have a late 08 TSI Passat if that makes any difference.
I have a question:
I ordered the below OEM 4-spoke leather steering wheel for my 2008 Passat. When installing this in my car, I will not use the multifunction buttons on the left and right side of the wheel. Are there any plastic inserts for these spots if I want to take these buttons out?
Last edited by vw_nc_dude; 05-05-2012 at 02:10 AM.
Can someone confirm if the following part number (steering wheel control module) supports MFSW?
It's not listed on the Ross-Tech site: http://wiki.ross-tech.com/wiki/index...er_3C0-953-549
kind of a mkv/b6 mash-up question...
i'm planning on driving my parking brake via linear actuator and want to hack the passat center console into my rabbit. it appears that the climate controls roughly line up and i can feel the passat mount holes beneath the carpet along the side of the center hump. are there different passat-specific braces beneath the ashtray area to help support the console? part #'s or pics would be very helpful.
EDIT: looks like the part #s i need are the left/right/center retaining brackets from the passat front console.
Last edited by iowarabbit; 06-27-2012 at 02:54 PM.
I'm going to change the Haldex and differentials fluids in my 2008 Passat, 3.6L, 4motion. I need drain and fill plugs for both front and rear diffs and the Haldex. I also need the Haldex oil filter. I'm assuming that the plugs come with gaskets/seals. I do not have part numbers. I'd like to get these ordered as soon as possible. Can anyone help me out? Thanks.
Hello to all part guys !!! I just need a little help trying to find out which is the right part number of a multifunction airbag harness with double stage bag, mycar is a b6 2.0t 2006. The #'s are:
1k0 971 584 or 1C0 971 584, the one 1c0971585B is for single stage airbag. I haven't buy yet the control module which is the 3C0-953-549-AH* so can anyone give a quote of harness and module + shipping to 11746.
Hey, do u know if i am able to swap out my frame with another b6 passat frame? also do you know if the engine bay frame is removable by itself? i was informed that it is a bolt on frame, does that mean if my engine bay frame is bent, i can replace just that part of the frame?