Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Page 6 of 7 FirstFirst ... 234567 LastLast
    Results 176 to 210 of 213

    Thread: FABDEPOT - You want to build your own manifold then look in here!

    1. Member junkyardjockey's Avatar
      Join Date
      Nov 11th, 2001
      Location
      Utica,NY
      Posts
      4,742
      11-25-2010 02:19 PM #176
      Quote Originally Posted by INA View Post
      Quote, originally posted by JettaConA-G60 »
      how about a intake flange for a 2.0 16v?

      Anyone else want 1 of these?
      I do! I would like a flange made out of plain steel(not stainless)of the joint between the lower & upper 1/2 that would allow you to make a custom intake & bolt it to the lower 1/2
      Last edited by junkyardjockey; 11-25-2010 at 03:13 PM.

    2. Member Issam Abed's Avatar
      Join Date
      Feb 12th, 2004
      Location
      EVERYWHERE
      Posts
      13,396
      Vehicles
      91 Audi 80 2.0T
      12-01-2010 06:36 AM #177
      Quote Originally Posted by speed51133! View Post
      how about 1.8t intake flange, big port, with injector ports in it??
      Made 1 of these years ago.Could make it again if there was interest.

    3. Member V-TEC this!!!'s Avatar
      Join Date
      May 4th, 2003
      Location
      London, Ont/Krakow, PL
      Posts
      4,370
      Vehicles
      2002 Jetta TDi, 1990 G60 Corrado
      12-01-2010 02:05 PM #178
      Hey, got all my parts fro my 16v sri 2 weeks ago.

      Thanks, Mike

    4. Member junkyardjockey's Avatar
      Join Date
      Nov 11th, 2001
      Location
      Utica,NY
      Posts
      4,742
      12-02-2010 08:10 AM #179
      I would like to see a flange made up that would go between the joint of the lower & upper intake on a 16v;that would bolt to the lower half of the intake & would allow me to build an intake off of that..that I would buy

    5. Member junkyardjockey's Avatar
      Join Date
      Nov 11th, 2001
      Location
      Utica,NY
      Posts
      4,742
      01-05-2011 08:22 PM #180
      Quote Originally Posted by Crescent View Post
      These 16v intake flanges still available?...what about the runners? & velocity stacks/
      you can do 16v flanges and intake runners too?? sign me up!

    6. Forum Sponsor INA's Avatar
      Join Date
      Nov 15th, 2005
      Location
      EARTH
      Posts
      6,832
      Vehicles
      Too many to list
      01-31-2011 01:14 AM #181
      Quote Originally Posted by junkyardjockey View Post
      you can do 16v flanges and intake runners too?? sign me up!
      Runners and velocity stacks we usually sell RMR components.

      I am very sorry I have not posted or updated this thread in a while. We have had a few requests for some custom work and when we give the time frame to people they get all bent out of shape. If we do not have it in STOCK or we have not made the component before then expect to:
      1. pay a premium for it
      2. wait for it


      Very few people understand what it is like to own and operate a CNC Mill. The reason people (like us) use CNC Mill's is for the ability to run MULTIPLE parts in the same pass while charging for the same labour. I can not stop the machine making multiple parts booked months in advance to program and make 1 single flange.

      Contrary to popular belief, designing a component in solidworks is the easiest step. That file needs to be inputed into the Mill frame and a tooling path has to be created.

      We will make whatever component you want but there is a 6 week minimum wait time and 15 piece minimum order. So lets say you want a 3.6 VR6 FSI intake flange and you do not have the file , we will draw the file for you , supply you with a quote for those 15 pieces (including the engineering time) and charge you for the 15 pieces BEFORE any work commences.
      We are not afraid to handle any project but at the same time the machines are not sitting here collecting dust. If you have any questions please do not hesitate to ask.
      INA Engineering Inc.
      Email | Facebook
      INA Billet | Mahle Powerpak | DM Forged | Ferrea | Supertech | ARP | South Bend | HTA/GTX/EFR Turbochargers | Mocal Oil control | DBW Throttle Body Upgrades | 0A6box

    7. Member
      Join Date
      Feb 6th, 2010
      Location
      Bloomfield, Ky
      Posts
      1,025
      02-01-2011 05:56 PM #182
      Great service and great prices. Thanks for everything.

      I will be back to see you soon.

    8. Forum Sponsor INA's Avatar
      Join Date
      Nov 15th, 2005
      Location
      EARTH
      Posts
      6,832
      Vehicles
      Too many to list
      02-01-2011 10:16 PM #183
      Quote Originally Posted by chopshopinc View Post
      Great service and great prices. Thanks for everything.

      I will be back to see you soon.
      You are welcome
      INA Engineering Inc.
      Email | Facebook
      INA Billet | Mahle Powerpak | DM Forged | Ferrea | Supertech | ARP | South Bend | HTA/GTX/EFR Turbochargers | Mocal Oil control | DBW Throttle Body Upgrades | 0A6box

    9. 02-02-2011 03:16 PM #184
      did you get that 24v exhaust flange sent out yet?
      Straightline Autowerks
      Dave Paster (856-725-6208)
      Dave@slawbuilt.com
      Body work,painting,mechanical,fabrication,air installation
      PVW cover 3/9 & feature 4/10

    10. Forum Sponsor INA's Avatar
      Join Date
      Nov 15th, 2005
      Location
      EARTH
      Posts
      6,832
      Vehicles
      Too many to list
      02-02-2011 05:16 PM #185
      Quote Originally Posted by bmxrado View Post
      did you get that 24v exhaust flange sent out yet?
      Yes Dave
      shipped yesterday
      Thanks for the support.
      INA Engineering Inc.
      Email | Facebook
      INA Billet | Mahle Powerpak | DM Forged | Ferrea | Supertech | ARP | South Bend | HTA/GTX/EFR Turbochargers | Mocal Oil control | DBW Throttle Body Upgrades | 0A6box

    11. Member zcxerxes's Avatar
      Join Date
      Nov 13th, 2005
      Location
      44035
      Posts
      815
      Vehicles
      64 notchback, 87 scirocco 16v, 93 corrado
      02-08-2011 09:03 PM #186
      Quote Originally Posted by INA View Post
      .......Very few people understand what it is like to own and operate a CNC Mill. The reason people (like us) use CNC Mill's is for the ability to run MULTIPLE parts in the same pass while charging for the same labour. I can not stop the machine making multiple parts booked months in advance to program and make 1 single flange.....

      We are not afraid to handle any project but at the same time the machines are not sitting here collecting dust. If you have any questions please do not hesitate to ask......
      I have a buddy that runs a machine shop and the first part I didn't understand till I had him make a flange for me. And the second is just rule of thumb if the machines aren't running you aren't making money



      Have you made vr6 manifold to downpipe flanges? If so got any on the shelf or how much for 8 of them stainless 1/2"?

    12. Forum Sponsor INA's Avatar
      Join Date
      Nov 15th, 2005
      Location
      EARTH
      Posts
      6,832
      Vehicles
      Too many to list
      02-10-2011 12:00 AM #187
      Quote Originally Posted by zcxerxes View Post
      I have a buddy that runs a machine shop and the first part I didn't understand till I had him make a flange for me. And the second is just rule of thumb if the machines aren't running you aren't making money



      Have you made vr6 manifold to downpipe flanges? If so got any on the shelf or how much for 8 of them stainless 1/2"?
      The hexagonal flange or the triangular flange?
      INA Engineering Inc.
      Email | Facebook
      INA Billet | Mahle Powerpak | DM Forged | Ferrea | Supertech | ARP | South Bend | HTA/GTX/EFR Turbochargers | Mocal Oil control | DBW Throttle Body Upgrades | 0A6box

    13. Member zcxerxes's Avatar
      Join Date
      Nov 13th, 2005
      Location
      44035
      Posts
      815
      Vehicles
      64 notchback, 87 scirocco 16v, 93 corrado
      02-10-2011 02:55 AM #188
      Triangle

    14. 02-10-2011 07:44 AM #189
      Got my 24v exhaust manifold flange, looks awesome can't wait to get started thanks alot.
      Straightline Autowerks
      Dave Paster (856-725-6208)
      Dave@slawbuilt.com
      Body work,painting,mechanical,fabrication,air installation
      PVW cover 3/9 & feature 4/10

    15. Forum Sponsor INA's Avatar
      Join Date
      Nov 15th, 2005
      Location
      EARTH
      Posts
      6,832
      Vehicles
      Too many to list
      02-19-2011 10:45 PM #190
      Quote Originally Posted by zcxerxes View Post
      Triangle
      Send me an email.
      Thanks for the support guys.
      INA Engineering Inc.
      Email | Facebook
      INA Billet | Mahle Powerpak | DM Forged | Ferrea | Supertech | ARP | South Bend | HTA/GTX/EFR Turbochargers | Mocal Oil control | DBW Throttle Body Upgrades | 0A6box

    16. Forum Sponsor INA's Avatar
      Join Date
      Nov 15th, 2005
      Location
      EARTH
      Posts
      6,832
      Vehicles
      Too many to list
      02-23-2011 10:18 PM #191
      All PM's Replied. Thank you for the continued support!
      INA Engineering Inc.
      Email | Facebook
      INA Billet | Mahle Powerpak | DM Forged | Ferrea | Supertech | ARP | South Bend | HTA/GTX/EFR Turbochargers | Mocal Oil control | DBW Throttle Body Upgrades | 0A6box

    17. 03-05-2011 10:09 PM #192
      where can i find a 6 into divided t4 collector?

    18. 03-13-2011 03:20 PM #193
      Quote Originally Posted by my2000APB View Post
      where can i find a 6 into divided t4 collector?
      ???

    19. Forum Sponsor Sales@INA's Avatar
      Join Date
      Dec 30th, 2007
      Location
      Ottawa , ON
      Posts
      720
      Vehicles
      2012 GLI
      04-18-2011 01:33 AM #194
      Sorry I just saw this now.

      Send Issam an email and he will discuss your options
      Iabed@inaengineering.com
      INA Engineering Inc.
      Email SALES | Facebook Connect
      Performance through Design.....

    20. Member
      Join Date
      Jan 16th, 2002
      Location
      253
      Posts
      1,480
      04-23-2011 03:34 PM #195
      looking for a 8v exhaust flange..
      Caddy ABA-t holset hx35 :-) GLX VR-T.... TDI daily

      DCI

    21. Forum Sponsor Sales@INA's Avatar
      Join Date
      Dec 30th, 2007
      Location
      Ottawa , ON
      Posts
      720
      Vehicles
      2012 GLI
      04-24-2011 11:54 AM #196
      Send us an email.
      Iabed@inaengineering.com
      INA Engineering Inc.
      Email SALES | Facebook Connect
      Performance through Design.....

    22. 04-24-2011 04:31 PM #197
      Quote Originally Posted by Sales@INA View Post
      Sorry I just saw this now.

      Send Issam an email and he will discuss your options
      Iabed@inaengineering.com
      Mail sent

    23. Forum Sponsor Sales@INA's Avatar
      Join Date
      Dec 30th, 2007
      Location
      Ottawa , ON
      Posts
      720
      Vehicles
      2012 GLI
      05-23-2011 12:15 AM #198
      Thanks for the support
      INA Engineering Inc.
      Email SALES | Facebook Connect
      Performance through Design.....

    24. Forum Sponsor Sales@INA's Avatar
      Join Date
      Dec 30th, 2007
      Location
      Ottawa , ON
      Posts
      720
      Vehicles
      2012 GLI
      07-26-2011 09:17 PM #199
      Hello Everyone!
      Issam is on his honeymoon and will be back shortly. All orders placed will be processed upon his return. If you're checking the status of an already placed order, please send us an email at iabed@inaengineering.com and he will get back to you as soon as he can. If anyone has any product inquiries or tech questions, as always feel free to pm me.

      Thanks
      Isaac
      INA Engineering Inc.
      Email SALES | Facebook Connect
      Performance through Design.....

    25. Member
      Join Date
      Apr 26th, 2008
      Location
      Ironton, OH
      Posts
      668
      Vehicles
      02' VW Cabrio
      08-09-2011 02:07 AM #200
      Sent an email, hope to hear back soon!

    26. Member Pat @ Pitt Soundworks's Avatar
      Join Date
      Nov 14th, 2008
      Location
      Pittsburgh
      Posts
      4,163
      08-11-2011 12:26 AM #201
      How about a T3 Log Manifold Flange like on the first page, cut for 1.5" sch40 weldel pipe, and made out of mild steel?

      And tial 38mm v-band inlet/outlet flanges in mild steel?

    27. Forum Sponsor Sales@INA's Avatar
      Join Date
      Dec 30th, 2007
      Location
      Ottawa , ON
      Posts
      720
      Vehicles
      2012 GLI
      10-06-2011 09:27 PM #202
      Quote Originally Posted by Pat @ Pitt Soundworks View Post
      How about a T3 Log Manifold Flange like on the first page, cut for 1.5" sch40 weldel pipe, and made out of mild steel?

      And tial 38mm v-band inlet/outlet flanges in mild steel?
      As always, you can send us an email or pm.
      thanks
      INA Engineering Inc.
      Email SALES | Facebook Connect
      Performance through Design.....

    28. Forum Sponsor Sales@INA's Avatar
      Join Date
      Dec 30th, 2007
      Location
      Ottawa , ON
      Posts
      720
      Vehicles
      2012 GLI
      11-24-2011 02:40 PM #203
      Happy Thanksgiving
      From all of us here at INA Engineering
      INA Engineering Inc.
      Email SALES | Facebook Connect
      Performance through Design.....

    29. Forum Sponsor Sales@INA's Avatar
      Join Date
      Dec 30th, 2007
      Location
      Ottawa , ON
      Posts
      720
      Vehicles
      2012 GLI
      12-21-2011 07:42 PM #204
      Our Christmas sales are still going on!!!
      INA Engineering Inc.
      Email SALES | Facebook Connect
      Performance through Design.....

    30. Member
      Join Date
      Aug 8th, 2003
      Location
      Las Vegas NV
      Posts
      219
      Vehicles
      84 GTI,84 GLI coupe, 78 Scirocco
      04-16-2012 03:31 AM #205
      looking for intake flange for aba like the usrt intake has

    31. Forum Sponsor Sales@INA's Avatar
      Join Date
      Dec 30th, 2007
      Location
      Ottawa , ON
      Posts
      720
      Vehicles
      2012 GLI
      04-24-2012 04:39 PM #206
      Quote Originally Posted by JakRabit View Post
      looking for intake flange for aba like the usrt intake has
      Not currently making any
      INA Engineering Inc.
      Email SALES | Facebook Connect
      Performance through Design.....

    32. Member
      Join Date
      Aug 8th, 2003
      Location
      Las Vegas NV
      Posts
      219
      Vehicles
      84 GTI,84 GLI coupe, 78 Scirocco
      04-26-2012 10:58 AM #207
      who is making them

    33. Forum Sponsor Sales@INA's Avatar
      Join Date
      Dec 30th, 2007
      Location
      Ottawa , ON
      Posts
      720
      Vehicles
      2012 GLI
      08-24-2012 12:13 PM #208
      INA Engineering Inc.
      Email SALES | Facebook Connect
      Performance through Design.....

    34. 02-21-2013 04:12 PM #209
      are there any 16v billet im flanges available?

    35. 03-01-2013 12:17 PM #210
      Quote Originally Posted by my2000APB View Post
      are there any 16v billet im flanges available?
      ???

    Page 6 of 7 FirstFirst ... 234567 LastLast

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •