I dont know too much about these cars, but i think one would make for a nice project. I ran across one on craigslist....im going to go and check it out on saturday...is there anything i should specifically look for. Its 86 5000 CS.....
#106
Freshly painted VC on my friends WHite 200
![]()
#107
I dont know too much about these cars, but i think one would make for a nice project. I ran across one on craigslist....im going to go and check it out on saturday...is there anything i should specifically look for. Its 86 5000 CS.....
#108
Try and find yourself a CD Quattro. they come in 5spd. loads of potential
#109
What do you think of this one......(i know its not a 5000)
http://lincoln.craigslist.org/cto/1296043015.htmlIm basically trying to find an old school Audi as a side project, that i can slowly restore...
#110
so buy mine!![]()
http://forums.vwvortex.com/zerothread?id=4472088
Modified by xSWINDLERx at 8:30 PM 8-13-2009
#111
Quote, originally posted by joshed_03GTi » What do you think of this one......(i know its not a 5000)
http://lincoln.craigslist.org/cto/1296043015.htmlIm basically trying to find an old school Audi as a side project, that i can slowly restore...
wow... yeah that will work !! it's a 4000 not an A4. but damn,,, nice car
#112
Quote, originally posted by Ktownboostn » Nice Ride. Five Cylinder Non Turbo Quattro ? Wanna buy some clear corners ? lol lol kinda tempted but also kinda tempted on getting the euro audi 200 headlights
I might try to look for a set next week in europe.. might as well eh
![]()
#113
Quote, originally posted by Tdotdub » lol kinda tempted but also kinda tempted on getting the euro audi 200 headlights
I might try to look for a set next week in europe.. might as well eh
speaking of it.. ebay.de time and local sites on hungary as well
yeah going to hungary but will have a LONG stop over in german... so i would have time to pick it up
![]()
#114
look up http://www.custom-auto-craft.comthe guy sells retro audi stuff. his name is paul fernandez. nice guy. tell him yoda sent you.
#115
was pulling out of my friends driveway and it made the back tire tuck like that haha I was so happy to see it low that I had to take pics. (cell phone)
I know, lame...but I cant help it!
I couldn't have gotten any better with the fitment on these wheels. So awesome. Still need to trim that particular fender liner.
Cant wait for coils!!!! Anyone have suggestions on what springrate I should use? I don't mind a harsh ride at all as long as handling is good.
Also, I am definitely a believer in those plugs now. It just sorta hit me how much better the car runs now. W000t!!!! Still gotta figure out issues, but its a little light in this damn car's situation haha.
#116
looks good !! I need to get on putting my springs in ... and get my hands on some wheels...
#117
Well the 4000 i posted was already sold, but at least it was sold to a guy on the tex. So right now im trying to get ahold of the guy of the first car i posted.....so hopefully at the end of the day, I should have a 5000 CSEdit:
I talked to the guy...and he took down the sale...its having a fuel problem...he says the fuel pump starts to make a weird noise when its started, sputters then dies...any ideas? oh and sorry for going way off topic...
Modified by joshed_03GTi at 4:16 PM 8-15-2009
#118
Quote, originally posted by loxxrider »
was pulling out of my friends driveway and it made the back tire tuck like that haha I was so happy to see it low that I had to take pics. (cell phone)
I know, lame...but I cant help it!
I couldn't have gotten any better with the fitment on these wheels. So awesome. Still need to trim that particular fender liner.
Cant wait for coils!!!! Anyone have suggestions on what springrate I should use? I don't mind a harsh ride at all as long as handling is good.
Also, I am definitely a believer in those plugs now. It just sorta hit me how much better the car runs now. W000t!!!! Still gotta figure out issues, but its a little light in this damn car's situation haha.
500ish front and 400ish rear should do you some good.
#119
So apparently I have a better pic of my audi. I was surfing the local gtg's, I go to sometimes and found a pic of my car. So far its the best picture I have to date.. yeah I know its sad. I never take pics of my cars.
![]()
#120
Couple of Shots from today.
![]()
#121
@loxrider,Damn man..that thing is going to look mint when you lower it....those are a good fit. so they are going to clear the fender fine then?
I really dig the wheels...very suiting for your car...what are they...actual Porsche wheel? what offset.?
I agree with the above mentioned spring rates...should do you good.
![]()
#122
Thanks man, I appreciate the kind words.They clear the actual fender just fine when the car hits on a bump or is weighed down, etc...it actually tucks the tire and wheel with a few centimeters to spare.
It does rub sometimes however. I'm pretty sure its just on the liner though. I took one out about a month ago to trim it a bit and it reduced the rubbing. I will pull them out again now that they've had more time on them for me to see where it really rubs and I'll trim them again. I'm hoping to not have to take them all the way out.
They are a replica Porsche wheel, 18x10 in back and 8.5 (or 8...not sure) in the front. Offsets are 55 for the rear and 50 for the front.
The fronts fit with absolutely no issues. The lips of the wheels line up almost exactly with the fender.
The adapters I got are 32mm in the rear and 26mm in the front.
I definitely cant wait to get it low, but getting the standalone straightened out first is my priority. We came upon some really good info about it this weekend, so I'm hoping to have it sorted sometime this week. Anyway, here are some pics from this weekend
she's been running slightly fat lol
more pics here
http://www.motorgeek.com/phpBB...53696
sneak peak of what you'll see there
Oh, and some vids of my carhttp://www.youtube.com/watch?v=7AAUuukVADo
http://www.youtube.com/watch?v=OF_UGnElNxw
and one of that hatch
(2nd and third gear)http://www.youtube.com/watch?v=nlInd1oTMMI
Modified by loxxrider at 1:47 AM 8-31-2009
#123
my old V8 with 18X10 Porsche Twist front and back
![]()
#124
Impulse buy... An 1985 audi 5000 turbo diesel. The idea is that I will pull the engine and drop it in my 1987 audi 5000s quattro.
![]()
![]()
also parting stuff if any one needs anything from this junk
#125
Thanks for the Desktop Background !
Mint car man !!!
![]()
#127
haa no problem man. I can send it to you higher res if you'd likeI just wish the car was low...then I'd be super happy with the way it looks
Modified by loxxrider at 11:34 AM 9-2-2009
#128
^ I want a higher res pic as well. I have it as my desktop pic as well![]()
#129
alright then will do when I get home and can use my other computer (I should really be paying attention in materials class right now)...I may pchop it dropped so i can see what she's going to look like.
#130
oh i forgot...tell me the size of your desktops so I can make some in the proper dimensions
#133
I'll let you know once i'm at home
#135
ok cool...looks like i forgot to post oneor two
![]()
#136
you guys want it dropped like this instead for your desktops
![]()
#137
well here is one with it lower in 1280x800
#138
Chris, will you email me all those pictures? i cant right click and save those since i am on a govt computer.kuma85@gmail.com
thanks bro!
#139
Quote, originally posted by kuma85 » Chris, will you email me all those pictures? i cant right click and save those since i am on a govt computer. kuma85@gmail.com
thanks bro!
wilco
in other news...
I think I am going to try and make my own custom sticker for my car (for when it's worthy)...
its going to be based on this picture
and the saying/theme will be along the lines of
as kinda an inside joke. Even on stock suspension when I get too many friends in my car it will rub, so I might do a custom version with t44 in mind
(I dont mean for that to be offensive to anyone...its just a lighthearted joke)
Anyway, maybe I'll make another along these lines
(aka low and wide or down n out)
I'll keep it updated if I do indeed get it in sticker form in case others want it. I have already started drawing it up.