Quote, originally posted by 2pt. slo » Lets get some more in here.. Anyone else have anything to add? ![]()
![]()
stock GLX wheel... No clue on the name
![]()
#37
Quote, originally posted by 2pt. slo » Lets get some more in here.. Anyone else have anything to add? ![]()
![]()
stock GLX wheel... No clue on the name
![]()
#38
good idea from a local guy![]()
#39
Quote, originally posted by 2pt. slo » can anyone confirm this as a BBS Wheel...has genesis cap..but i thought i remember seeing a bbs wheel that looked like this..Not getting to much help with other people posting....
Pretty sure those are Kinesis wheels.
I do fender rolling in the DC metro area.
#40
Yep think it was confirmed a few posts down..thanks for double comfirming![]()
I detail and do paint correction. Check it out!
-87-Scirocco-save
-68-Ford-Mustang-GT-Full-DetailPic-Heavy)
-My GTI
-Imola-Red-MKIII-Cabrio
#41
My daughter likes the BBS RS 240 14x6 4x100 forged goodness...
Widening them...
#42
Quote, originally posted by 2pt. slo » Anyone else have anything to add? ![]()
thanks. i know **** for bbs wheels.dont know if the 301's were mentioned.
![]()
#43
Quote, originally posted by 4690 »
thanks. i know **** for bbs wheels.dont know if the 301's were mentioned.
![]()
there is a long list of all the versions of the BBS RS. about 2nd 3rd post down.
I detail and do paint correction. Check it out!
-87-Scirocco-save
-68-Ford-Mustang-GT-Full-DetailPic-Heavy)
-My GTI
-Imola-Red-MKIII-Cabrio
#44
![]()
i didn't read it all.
![]()
#45
Quote, originally posted by 2pt. slo » BBS RZ
At first, I thought these were the ones I have as winter wheels... but then I noticed how flat these are.
Or is it just due to a different ET?Can anyone clear this up for me? Always wondered what these were called.
![]()
See how mine have quite some curve to them?
Are these the same ones, just with a different ET?
www.tiefundbreit.com - The blog about German car culture and all things low and wide.
#46
Quote, originally posted by 2pt. slo » Lets get some more in here.. Anyone else have anything to add? ![]()
BBS are overpriced.
![]()
#47
Quote, originally posted by ddg60 » i beieve they are PLS wheels if you look close there is a stamping where the writing is near the bottom says PLS
te HTN ones look close also but these are plshe's correct
![]()
Quote, originally posted by 2pt. slo » can anyone confirm this as a BBS Wheel...has genesis cap..but i thought i remember seeing a bbs wheel that looked like this..Not getting to much help with other people posting....
as you know, this is a Kinesis wheel. there are also a few other companies that have very similar designs, tramont, speedline, ect. not sure about a multipeice BBS design though.
here's one to add to the list, BBS RG. i have a set in 17 x 8/9" 5x114.3 (et45 iirc). they have metal center cap/lug cover, and the hex nut, while bigger, is pretty much the same as 17" RS hexnuts and both are interchangeable without any modification.
and i also have a few links you can add to the list of places to source lips, bolts, caps, ect. and while most of these places are in europe, most have international shipping on lock.
racing team hoffman
felgen man
another german place
titanium touchand, i cold swear that rkimports is not in business any longer. not 100% sure though.
Modified by zeroluxxx at 5:33 PM 1-23-2008
Conform or be cast out.
#48
these are RAII's i believe
![]()
#49
bbs solitudes 15x6.5
available on the european Corrado Storm, golf vr6 highline/ highline syncro, and a four lug version was available on a few of the colour concept cars5 lug on highline
5 lug on Corrado Storm
4 lug version on colour concept cabby
also had a rare embossed version
Modified by VR SEX at 6:14 PM 1-23-2008
-Andrew-
Turbine Mechanic
#50
very nice additions..keep it coming guys. i will try and update tomorrow and keep all new pics in the first post to keep it consolidated![]()
I detail and do paint correction. Check it out!
-87-Scirocco-save
-68-Ford-Mustang-GT-Full-DetailPic-Heavy)
-My GTI
-Imola-Red-MKIII-Cabrio
#52
You want wheels posted thay were made by BBS? I had a set of A!avantgarde wheels, made by BBS, imported by CEC wheels. 18x8.5, 5x112 et 35. 2 piece. "Design SLR"
They made a 1 piece and another 2 piece design. All the bolts were triple square and engraved with th BBS logo.
Modified by _Steve_ at 2:45 PM 1-23-2008
#53
Quote, originally posted by _Steve_ » You want wheels posted thay were made by BBS? I had a set of A!avantgarde wheels, made by BBS, imported by CEC wheels. 18x8.5, 5x112 et 35. 2 piece. "Design SLR"
They made a 1 piece and another 2 piece design. All the bolts were triple square and engraved with th BBS logo.
Modified by _Steve_ at 2:45 PM 1-23-2008a member of another forum was selling a set of those. but in chrome. same sizes iirc.
![]()
Conform or be cast out.
#54
BBS wheel bolt torque is 144in/lbs. That goes for the RS, the RM, LM, race wheels, etc. I don't know where the 40+ft/lb torque spec came from but it's a dirty rumor that spread way too far.144in/lbs is 12ft/lbs. Stop there. It's an M7x1 bolt, you're distorting it.
... to triple confirm, the wheel in question above with the Kinesis cap is a Kinesis Supercup.
Modified by Euro Nation at 2:58 PM 1-23-2008
#55
My new BBS Pininfarinas![]()
Hollow spoke?!
![]()
![]()
17x8, 5x120, ET40
#56
i own those, 5x120 et38 16x7.5
BBS Modas, came in 1 and 2 piece.
sweep'n'streets used to own these, 17x8 et45,17x9 et 49. 5x130
![]()
#60
Quote, originally posted by MALLMAN » This Bugatti wheel is mine.
It is 15x7, 5x100 and et 35. EB 515 is the wheel #stamped on the face. They are hubcentric, they clear 11.3 vr6 brakes and the lug holes are for factory ball seat lugs.
![]()
Modified by MALLMAN at 11:00 AM 1-23-2008
can you tell me how/where you got those???!!!!NICE THREAD!
![]()
#62
Quote, originally posted by Sketchy-B »
correct (about the wheel with the chicks leg being some "Hxx")![]()
was the BBS VZ mentioned yet? i saw the "new RA", but is the VZ different?
![]()
Horology, Renovations, Home, Auto, anything. You need it, I can do it. If I can't, I know who can! I'm here to help! Ask me anything, ill do my best.
MIKEPMCNAIR@GMAIL.COM
#63
any one got any info onm the rs007? iot wasnt in the list and i am looking at a set.
#64
Think on only saw RC's for a GLI
How about Regular BBS RC's with the concave face..
or the 337 ed. RCs with the shot-peened finish..
Naturally i must whore a picture..
let me know if i missed these and this is a repost amongst all these wheels..
![]()
#65
Quote, originally posted by gbaby95 » any one got any info onm the rs007? iot wasnt in the list and i am looking at a set. Add some info here
You must know a little bit if you're looking for a set.
#67
Quote, originally posted by LowNotSlow »
looks like a guys leg,wtf!!!![]()
#69
here's a few i have owned that you can add to the list. the centerbore on all of them was right about 60mm.RS265 17" X 8 ET +50 5X114.3mm
RS299 17" x 8" ET +45 5x114.3mm
RS300 17" x 9" ET +53 5x114.3mm
RS320 17" x 8" ET +43 5x114.3mm
RS321 17" x 9" ET +40 5x114.3mm
i love me some RS's
![]()
Conform or be cast out.
#70
do you guys know the style on these?i had them and sold them but i never knew wtf they were!! these are 17" btw
Modified by Coogi at 5:35 PM 1-23-2008