Quote, originally posted by zeroluxxx » found this searching for something else. no info though. it's like an RS without the bolts. i dig em.
could be bbs RZ from E30 bmw's but it looks like it's 15x8 not 15x7
![]()
#106
Quote, originally posted by 2pt. slo » Shouldnt matter to much, ive been updating most of the new wheels people have posted as well as links to sites.
![]()
Upgrade the torque spec in the original posts.
#107
Quote, originally posted by zeroluxxx » found this searching for something else. no info though. it's like an RS without the bolts. i dig em.
could be bbs RZ from E30 bmw's but it looks like it's 15x8 not 15x7
![]()
For peace of mind, resign as the general manager of the universe.
#109
Quote, originally posted by nap83 » could be bbs RZ from E30 bmw's but it looks like it's 15x8 not 15x7
![]()
They are actually BBS Rg's. I used to have a set. They are forged, one piece 15x7. Pretty rare as well!!!
Cheers
Derek
#110
Quote, originally posted by GINCH »
They are actually BBS Rg's. I used to have a set. They are forged, one piece 15x7. Pretty rare as well!!!
Cheers
Dereklooks almost the same, but yours is HOT ****
![]()
![]()
![]()
For peace of mind, resign as the general manager of the universe.
#113
Wheels...all....look..the ...same....yet....so ......different!
#115
Quote, originally posted by Euro Nation » Upgrade the torque spec in the original posts.
thanks for the info, updated for you my friend
![]()
I detail and do paint correction. Check it out!
-87-Scirocco-save
-68-Ford-Mustang-GT-Full-DetailPic-Heavy)
-My GTI
-Imola-Red-MKIII-Cabrio
#116
The following pertains to RM012s only. When widening:6.5" = ET 33
7" = ET 26.7
7.5" = ET 20.3
8" = ET 14
8.5"= ET 7.6
9" = ET 1.3
9.5" = ET -5.1
10" = ET -11.5
#117
mods can we get this up in the FAQ section???
I detail and do paint correction. Check it out!
-87-Scirocco-save
-68-Ford-Mustang-GT-Full-DetailPic-Heavy)
-My GTI
-Imola-Red-MKIII-Cabrio
#118
Please.
Quote, originally posted by 2pt. slo » mods can we get this up in the FAQ section??? ![]()
#120
Quote, originally posted by 92g60gti » Long Beaches are 17's, and came on mk4's....
Modified by 92g60gti at 9:47 AM 1-24-2008actually they are called long beaches too
#121
Small update to some info![]()
![]()
I detail and do paint correction. Check it out!
-87-Scirocco-save
-68-Ford-Mustang-GT-Full-DetailPic-Heavy)
-My GTI
-Imola-Red-MKIII-Cabrio
#123
Quote, originally posted by flygti14 » EB514 Bugatti (not pictured above) Where can I find these?
#124
a lil hexnut info. the RS's nuts come in a few different flavors, both OE and aftermarket.full-height
half height
quarter height
conical/flat
a set of 1/2's i polished, i had to take a pic before i sent them to the new owner...
and this pic shows the difference between a hexnut from a 17" JDM set of RG's (left), compared to a 17" JDM set of RS's. (right) both are 1/2 height.
Conform or be cast out.
#125
hey those are hexnuts haha i cant wait to get them![]()
Dub Cult
#126
this thread is just great....I need to throw a little RS action in here..
#127
didn't BBS start to re-use the names after periods of time?
these i belive are the newer version RZ's
Quote, originally posted by SIR ANDROID184 »
#129
I bet u BBS doesn't even remember half of these different variations. haha![]()
#131
came today.
black chrome, from a 17x8 5x120 et40 wheel.
#132
so so sexy![]()
![]()
I detail and do paint correction. Check it out!
-87-Scirocco-save
-68-Ford-Mustang-GT-Full-DetailPic-Heavy)
-My GTI
-Imola-Red-MKIII-Cabrio
#133
http://cgi.ebay.com/ebaymotors...ZWDVW+, original poster, second set of pininfarinas is 2-piece, not 3-piece.
#134
those are eurovan wheels.. I can't remmeber the name.. similar to the solitudes in looks but has much more meat around the stud pattern
![]()
-Andrew-
Turbine Mechanic
#135
Anyone have exact dimensions on RS bolts?
I'm talking:
Full length
Length of non-threaded section
Length of threaded section
diameter of shaft (or thread pitch #)If anyone has any off of a wheel right now and can measure them for me I'd appreciate it. I am trying to see if they are the same as the bolts from my Compomotives.
I am pretty sure they are, but want to know for sure.I do know for a fact that both BBS RS bolts and the bolts from my Compos have the same 8mm triple square head and 10mm rear nut.
And that there are 30 of them per wheel for 16" and under.Thanks,
-Dave
#136
What are these called? I'm sick of calling them B4 Passat VR6 GLX wheels![]()
![]()
Ranger 4.0 4x4, GLI VR6, '92 Eurovan GL, '99 xr80r, '78 kd100m
#137
Quote, originally posted by VOLKSATAN » Anyone have exact dimensions on RS bolts?
I'm talking:
Full length
Length of non-threaded section
Length of threaded section
diameter of shaft (or thread pitch #)If anyone has any off of a wheel right now and can measure them for me I'd appreciate it. I am trying to see if they are the same as the bolts from my Compomotives.
I am pretty sure they are, but want to know for sure.I do know for a fact that both BBS RS bolts and the bolts from my Compos have the same 8mm triple square head and 10mm rear nut.
And that there are 30 of them per wheel for 16" and under.Thanks,
-Davei'm sitting down for dinner, after that i'll get you some numbers.
![]()
Conform or be cast out.
#138
Quote, originally posted by BrockGTi » What are these called? I'm sick of calling them B4 Passat VR6 GLX wheels ![]()
![]()
ETKA just lists it as "BBS" 3A0 601 025 A
#139
i'm calling them 025a's from now on, then![]()
Ranger 4.0 4x4, GLI VR6, '92 Eurovan GL, '99 xr80r, '78 kd100m
#140
B4 BBS wheels![]()
Has anyone posted up the RT's?
BBS RT's. As in good luck finding them.
this guys car: '95MullberryVR6
PS: The first post has BBS GT2's, I believe those are just BBS GT's
Modified by ThatGuy at 5:14 PM 2-3-2008