Testers Wanted!! Guided Readiness Scripts

[ejg3855]

So once you have these map files is there a way to make use of them to have all readiness pass?

This thread seems about gathering information regarding the maps but not about how to use them

[Andy@Ross-Tech.com]

Here's how to use them:

http://www.ross-tech.com/vcds/tour/readiness.html

[V W tdi]

Stepped through setting readiness on 2001 Audi allroad 2.7t using the built in readiness function - it was using 078-907-551-aza.crd

My question is when I was going through I got no response in "evap purge valve diagnostic" i just forwarded to the next step but was curious if this is a problem. (w/my car or your script)

It should be noted that I have been getting o2 and cat codes (before readiness and after) if that makes a difference. I have questions about that but I'll save them for another thread.

Really have no idea but the readiness was great... thanks.

VCDS Version: Release 805.0
Data version: 20080625

Address 01: Engine
Control Module Part Number: 4Z7 907 551 K
Component and/or Version: 2.7l V6/5VT G 0001
Software Coding: 06752
Work Shop Code: WSC 02325
Additional Info: WAUYP64BX1N0xxxxx AUZ7Z0Y1635238

[Santos@Ross-Tech.com]

I just checked the script and it looks like i made a typo when entering the basic setting group.
You can manually start the test by going into basic settings and select group 70.

Allow engine to idle until:
Field 4 Displays: Evap OK

[V W tdi]

Thanks

[Eric@Gene'sForeignCar]

would it be possible to get the scripts for the following engine cods-

engine code
-2.0t bpy

-2.5l bgp
bgq
bpr
bps

-v6 3.6l blv

-v10 dsl turbo bwf

-v6 3.6 bhk

-v8 4.2 bar

-v6 3.2 bub

any info would be great just let me know what is offered and what i could recieve.

[what1021]

my 04 r32 wont set its readiness for the catalytic converter part, and the secondary air, and i have no check engine light as of now, so what can i do to get at least one of them ready????

[Santos@Ross-Tech.com]

Please send me an email containing an autoscan from your car. I have not received any feedback from our customers with modded R32s passing using the script. So our guided script may or may not work.


Modified by Santos@Ross-Tech.com at 8:46 AM 11-11-2008

[Santos@Ross-Tech.com]

Quote, originally posted by Eric@Gene’sForeignCar »

-2.0t bpy -2.5l bgp bgq bpr bps -v6 3.6l blv -v10 dsl turbo bwf -v6 3.6 bhk -v8 4.2 bar -v6 3.2 bub

We are currently testing scripts one at a time. Each script must be erased before scanning another vehicle. Please send me an autoscan from the car at the time you need to set readiness.

[vDUBnGTI]

need anything from a 97 jetta gt 2.0 automatic

[_pineapplegti_]

hey santos i believe i have the latest release of vag.. i have a 96 gti .. do u need me to send you scripts to get the "set readiness " function or is it not possible with my car. Thanks

[Santos@Ross-Tech.com]

Quote, originally posted by _pineapplegti_ »

hey santos i believe i have the latest release of vag.. i have a 96 gti .. do u need me to send you scripts to get the "set readiness " function or is it not possible with my car. Thanks

Please send me an auto scan of your car via email.

[audivwfan]

I have a 2000 A4 Avant with engine ATW. Do you need a tester for this one? I didn't see it listed in either list. It's a 1.8t 4 cylinder, no mods......YET! L:MK

[bazoldskoolmk2]

?


Modified by Gozer The Destructor at 9:26 AM 12-17-2008

[BlckIvie6xoxo9]

E-mailed you the info on a AAA 96 VR6 Jetta. Hoping you can get to it soon, We keep failing inspection cause we have to clear the DTC's for SAI before going.. Thanks!

[Santos@Ross-Tech.com]

Our readiness scripts force the tests to initialize not to "trick" the system into making it pass. If a problem truly exists you will fail that bit and may have a CEL.

[o2bad455]

Quote, originally posted by BlckIvie6xoxo9 »

E-mailed you the info on a AAA 96 VR6 Jetta. Hoping you can get to it soon, We keep failing inspection cause we have to clear the DTC's for SAI before going.. Thanks!

Quote, originally posted by Santos@Ross-Tech.com »

Our readiness scripts force the tests to initialize not to "trick" the system into making it pass. If a problem truly exists you will fail that bit and may have a CEL.

Most states allow at least one unset readiness bit, and some allow several. This isn't a "trick". I have an unsolved SAI issue with a 97 AAA too, but have been able to set all the other readiness bits using VAG-COM and pass emissions before the SAI became ready and kicked the CEL on. Obviously, a script would have made it a bit easier, as long as one or more readiness bits/systems (e.g., SAI) could be skipped. It would be nice if the scripts allowed this.


Modified by o2bad455 at 11:39 PM 1-30-2009

[Theresias]

Simply pressing next at the bit/thing you are trying to skip should do what you're asking.

[o2bad455]

Quote, originally posted by Theresias »

Simply pressing next at the bit/thing you are trying to skip should do what you're asking.

I think you're right, but not positive. I juggled the order of the other tests when trying to get it through, but I'm not sure if that was necessary or just coincidence.

[saytheb]

Hi Santos, Andy

I have the 08 TT w/ engine code BWA.
Are you looking for info on this platform as well?

[Theresias]

2.0Ts AXX/BWA/BPY etc. are covered. Thanks for asking.

[gtizzel]

My car wont set readiness for SAI or O2 sensors. Here is the auto scan... Any advice would be great.

Chassis Type: 1J - VW Golf/Bora IV
Scan: 01 02 03 08 15 16 17 19 22 29 35 36 37 39 46 47 55 56 57 75
76

VIN: 9BWDE61J134052348 Mileage: 81640km/50728miles
-------------------------------------------------------------------------------
Address 01: Engine Labels: 06A-906-032-AWP.lbl
Part No: 06A 906 032 LP
Component: 1.8L R4/5VT G01*0005
Coding: 11510
Shop #: WSC 10002
XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXX

No fault code found.
Readiness: 0010 1000

-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 1C0-907-37x-ASR.lbl
Part No: 1C0 907 379 K
Component: ASR FRONT MK60 0103
Coding: 0021505
Shop #: WSC 00000 785 00200

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags Labels: 6Q0-909-605-VW5.lbl
Part No: 1C0 909 605 F
Component: 08 AIRBAG VW61 0202 0001
Coding: 12344
Shop #: WSC 00000

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments Labels: 1J0-920-xx5-17.lbl
Part No: 1J0 920 906 J
Component: KOMBI+WEGFAHRSP VDO V07
Coding: 07232
Shop #: WSC 25641
9BWDE61J134052348 VWZ7Z0C6715048

1 Fault Found:
01177 - Engine Control Unit
64-10 - Not Currently Testable - Intermittent

-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 6N0-909-901-19.lbl
Part No: 6N0 909 901
Component: Gateway K<->CAN 0001
Coding: 00006
Shop #: WSC 00000

No fault code found.

-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 1C0-959-799.lbl
Part No: 1C0 959 799 C
Component: 8B Komfortgerát HLO 0003
Coding: 00064
Shop #: WSC 00000

Part No: 1C1959801A
Component: 8B Tõrsteuer.FS KLO 0009

Part No: 1C1959802A
Component: 8B Tõrsteuer.BF KLO 0009

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio Labels: 3B7-035-1xx-56.lbl
Part No: 3B7 035 180
Component: Radio ZSW 0018
Coding: 00031
Shop #: WSC 00000

No fault code found.

End ---------------------------------------------------------------------

[VWTattoo]

Hello- I'm trying to get the Secondary Air Injection bit to pass for inspection, and have an 04 R32 with only a BMC CDA for a mod. Is there a script that I can try to set this to pass for inspection, as well as for the rest of the script processing to help you out with this engine code? I have no codes to clear at this point, but can scan for whatever you'd like and send it to you.

UPDATE: Sent AutoScan.txt to support. (03/05/09, 6:00 PM ish)

UPDATE 2: No reply back since sending that file. Did I not send the file correctly? I just want to help get the BJS engine code script working for y'all. My SAI Reaidness was set by Friday AM, so I had all 0's for the emissions inspection and I am in no need to get it set for myself, but if it helps to have someone test this for the masses, I am willing.

UPDATE 3: File Received from Santos this AM, will test tonight, hopefully! ---Just tried it, couldn't get the Set Readiness button to be clickable. Sent email to Santos.

VWTat


Modified by VWTattoo at 6:53 PM 3-9-2009

[Fissues]

Just got my Vagcom cable. Can I be of any help with my TTS Roadster? Not that I would know how yet.


Modified by Fissues at 5:04 PM 3/11/2009

[frag85]

I found an error, which I thought I had fixed in an earlier release by editing a script or *.lbl file.

Engine: AWW 1.8t (North-American)

When going through the automated readiness script in the latest VCDS release, version 80x.x, it asks to verify the O2 sensor status as 111, and 110, this is found in block 030.

Block 30 should read: "Oxygen Sensor Status, Bank 1, Sensor 1, Spec: 111, Bank 1, Sensor 2, Spec: 110"

The script shows Block 028; Knock Sensor Test, instead of block 030. Block 030 does not come up at all when Setting Readiness via. the VCDS Script. I would assume this is just a small type-o on Vag-Com's end. I double checked in the MKIV Bentley DVD just to be sure, and block 030 is correct.

[Santos@Ross-Tech.com]

Thanks for the feedback. I will make the necessary corrections.

[amidcars]

Woopi!! I would highly appreciate do the one for the AFP if you ever do it.

[Santos@Ross-Tech.com]

The AFP readiness script is already included in VCDS.

[nickg]

is the script in the vcds for aeg? i tried and i can't seem to get it to run...i get it saying "test off" alot

[Santos@Ross-Tech.com]

I'm currently on Vacation but should be back on Tuesday. I have a 99.5 jetta with an AEG and will be able to test it pretty quick.

[viktoratanasovski]

do you know some internet pages with manuals for v.a.g 1799 and v.a.g 1551?? thancks

[nickg]

Quote, originally posted by Santos@Ross-Tech.com »

I'm currently on Vacation but should be back on Tuesday. I have a 99.5 jetta with an AEG and will be able to test it pretty quick.

i got it to go..it was cold and just took a bit of extra time

[hlgladiator]

I have an AMB ('04 A4 1.8T). I'm willing to be a guinea pig if you need me =P

[Santos@Ross-Tech.com]

please send me an email with an autoscan and channel map.

[winter]

Santos, we're one of your clients from Reading Pa. If you are missing certain ECM's, give me a shout. http://www.mairscontinentalmotors.com