Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Page 7 of 8 FirstFirst ... 345678 LastLast
    Results 211 to 245 of 261

    Thread: Sale Sachs & Clutchnet Clutch kits W/ flywheel From $299.95 Shipped

    1. Junior Member allan_84's Avatar
      Join Date
      Apr 29th, 2004
      Location
      Horsens, Denmark
      Posts
      98
      Vehicles
      01' Seat Leon 1,8 20vt 180hp
      08-28-2011 05:34 PM #211
      hi, i have a 1,8t, 6speed 02m gearbox and 240mm clutch.

      i like to get a new flywheel and clutch, but i dont like it to have chatter like some say the single mass flywheel will make it to do.

      in the future my plan is to go with something like the gt2860rs turbo or similar.

      can you recommend a setup?

      and can you ship to europe?
      Seat Leon 1,8 20VT, 210bhp and 262 lbs/ft (355nm), 3" DP, 2,75" Milltek Exhaust, stage 1 software, Cupra R front and rear bumpers and side skirts.

    2. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      1,984
      Vehicles
      92 Corrado SLC , 92 Audi S4
      08-29-2011 03:42 PM #212
      Last edited by FourSeasonTuning.com; 09-09-2011 at 12:19 PM.
      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    3. Member Niagara_V_Dub's Avatar
      Join Date
      Sep 25th, 2007
      Location
      Lemoore, CA
      Posts
      1,773
      Vehicles
      hoopty on air
      10-01-2011 03:02 PM #213
      website down? no workie when clicky.

    4. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      1,984
      Vehicles
      92 Corrado SLC , 92 Audi S4
      10-03-2011 01:45 PM #214
      Site is working now.
      www.fourseasontuning.com
      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    5. Member Niagara_V_Dub's Avatar
      Join Date
      Sep 25th, 2007
      Location
      Lemoore, CA
      Posts
      1,773
      Vehicles
      hoopty on air
      10-04-2011 03:43 PM #215
      What set/kit do you recomend for a cheapskate with a 2002 mkiv jetta with a 1.8t and 5 speed, who might in the future get a frankenturbo putting out near to 300ish ft/lbs to the wheels?

    6. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      1,984
      Vehicles
      92 Corrado SLC , 92 Audi S4
      10-05-2011 12:37 AM #216
      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    7. Junior Member
      Join Date
      Aug 23rd, 2011
      Location
      somewhere
      Posts
      29
      11-04-2011 11:19 AM #217
      You have email
      Audi S3 8L @ 400whp

    8. Member Big_Tom's Avatar
      Join Date
      Aug 19th, 2007
      Location
      Orlando, FL
      Posts
      12,556
      Vehicles
      01 Jetta Wolfsburg Ed, 92 Honda Prelude Si JDM H22 Swapped
      02-06-2012 02:21 PM #218
      i my vr6 clucth kit it's been holding strong 330whp for 2 years! It's hard to beat the value of this clutch
      My Thread Fk AK Coilovers, Full 3" Exhaust, Custom FMIC, Forge Evo14 BOV, Forge Unos MBC, Forge Throttle Body Hose, GodSpeed Aluminum Radiator, Prothane Dog Bone Mount, BFI STG 1 Eng/Trans Mounts, Sachs VR6 Clutch Kit, TT Short Shifter, Siemens 630s, Walbro 255, DBB Garrett 50 Trim Turbo Kit, Eurodyne 630cc MAFLESS PAGPARTS FTW -- STEVEBILT.COM -- Integrated Engineering -- FourSeasonTuning.com Don't Buy Anything From *ChunkyPeanuts*

    9. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      1,984
      Vehicles
      92 Corrado SLC , 92 Audi S4
      02-07-2012 03:03 PM #219
      It's a daily sale price, we don't do quarterly sales like others. We have free shipping (contiguous 48 states), great customer service and support.

      www.fourseasontuning.com
      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    10. Member Big_Tom's Avatar
      Join Date
      Aug 19th, 2007
      Location
      Orlando, FL
      Posts
      12,556
      Vehicles
      01 Jetta Wolfsburg Ed, 92 Honda Prelude Si JDM H22 Swapped
      02-08-2012 06:08 PM #220
      Quote Originally Posted by FourSeasonTuning.com View Post
      We have free shipping (contiguous 48 states), great customer service and support.

      www.fourseasontuning.com
      yes you do
      My Thread Fk AK Coilovers, Full 3" Exhaust, Custom FMIC, Forge Evo14 BOV, Forge Unos MBC, Forge Throttle Body Hose, GodSpeed Aluminum Radiator, Prothane Dog Bone Mount, BFI STG 1 Eng/Trans Mounts, Sachs VR6 Clutch Kit, TT Short Shifter, Siemens 630s, Walbro 255, DBB Garrett 50 Trim Turbo Kit, Eurodyne 630cc MAFLESS PAGPARTS FTW -- STEVEBILT.COM -- Integrated Engineering -- FourSeasonTuning.com Don't Buy Anything From *ChunkyPeanuts*

    11. Member
      Join Date
      Feb 7th, 2009
      Location
      Central New York
      Posts
      556
      Vehicles
      2001 Audi TT 225 / 1990 Audi Coupe Quattro x2
      05-22-2012 08:05 AM #221
      02M 6-speed in my TT, puts down mid 200's right now to the wheels and almost 300tq.

      I already have a fidanza aluminum lwfw (chatters like a mofo but i like the revs), the spec 2 clutch i have is slipping, making noise... and did i mention me throw out bearing is almost completely worn? (ie i need this kit asap!)

      I plan on doing some rods and maybe getting more like 300-400awhp in the future, so i want something that will handle that, but be nice to drive still.

      i want something sprung, something that can handle launches. I have a wot box and do 5500rpm launches, i also do autox.

      prefer not to spend more then 700. more towards 500 would be nice. if possible.

      what would you recommend?
      clutchnet stage 2x? kevlar? fiber carbon? 6 puck or disc? so many options!

      would this one be overkill? it's a 6-puck so it'll rev nicer from the decreased weight correct?
      http://www.fourseasontuning.com/inde...CR21.0A5141671

      can that clutch disc be swapped out? i see the discs range from about 150-225, so doing the math i should be looking at around 600-625 for what i want.
      Last edited by frostyflax17; 05-22-2012 at 08:10 AM.
      2001 Audi TT 225 - DD mod list= http://www.cardomain.com/ride/3243695/2001-audi-tt
      1990 Audi Coupe Quattro - Project G6 classified

    12. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      1,984
      Vehicles
      92 Corrado SLC , 92 Audi S4
      05-23-2012 11:53 AM #222
      I prefer the organic sprung hub disc for daily driven and road coarse street cars.
      Make sure you change the friction surface on your alloy flywheel.

      As for 5500 rpm launches a 4 or 6 puck would be better, however these wear much faster and have a more harsh engagement.

      Clutchnet stage 2
      http://fourseasontuning.com/product....7G19.0A5141671

      South Bend / DXD stage 2
      http://fourseasontuning.com/product....de=K70287-HD-O
      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    13. Member
      Join Date
      Feb 7th, 2009
      Location
      Central New York
      Posts
      556
      Vehicles
      2001 Audi TT 225 / 1990 Audi Coupe Quattro x2
      05-23-2012 12:37 PM #223
      yeah i was told about the friction surface. do i just get it machined or should i just get a completely new surface? (i see some of them are 2 piece replaceable surfaces)

      the 2 you posted only handle 400 at the flywheel, i plan on exceeding then. I was looking for 350awhp.

      what's the life expectancy on the 6puck fiber carbon or kevlar? less then 60k you think?

      which is a smoother transition. i would think fiber carbon, seems like a softer compound.

      do you guys do package deals for people that want a big order? i was thinking about doing rods, rings, valve cover seal, rear main seal, and the necessary hardware as well.

      so this clutch after what i'm reading seems like it'll fit my needs...?
      http://www.fourseasontuning.com/inde...CR21.0A5141671

      instead of the 6-pick disc on that, would it be better to swap in this disc? (handle the power as well and last longer? Once again, fiber carbon or kevlar?
      http://www.fourseasontuning.com/prod..._code=43607Y15

      what about a full hub stg 3 disc?
      Last edited by frostyflax17; 05-23-2012 at 12:43 PM.
      2001 Audi TT 225 - DD mod list= http://www.cardomain.com/ride/3243695/2001-audi-tt
      1990 Audi Coupe Quattro - Project G6 classified

    14. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      1,984
      Vehicles
      92 Corrado SLC , 92 Audi S4
      05-25-2012 12:19 PM #224
      Hard to state the longevity clutch. Most clutch companies don't offer a warranty on race parts. Solid hubs discs can be provided at no additional cost.

      The 500-700 budget you have will not provide you a stage 3 that uses sachs sport pressure plate (more suited for your power levels). IMO the stage 2 kits with 4 or 6 puck will not last and puck type disc should be inspected every season or more.

      For you set up I would consider stage 3. For example south bend/dxd uses a sachs race engineered pressure plate, this is far different than the stage 2 pressure plates. These kits raise the torque levels another 70-100 above the stage 2 kits.

      $899.95 SBC/DXD Stage 3 Daily Kit 240MM Organic Sprung hub Clutch disc, Sachs sport pressure plate & OE release bearing.Rated @ 470 Torque.

      02M SBC/DXD Stage 3 Daily Kit

      $949.95 SBC/DXD Stage 3 Endurance Kit TZ 240MM Kevlar Sprung hub Clutch disc, Sachs sport pressure plate & OE release bearing.Rated @ 485 Torque.

      02M SBC/DXD Stage 3 TZ Endurance Kit

      $949.95 SBC Stage 3 Endurance OFE 240MM OFE Clutch disc, Sachs Sport pressure plate & OE release bearing. Rated @ 500 Torque.

      SBC 02M Stage 3 OFE KIT

      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    15. Member
      Join Date
      Feb 7th, 2009
      Location
      Central New York
      Posts
      556
      Vehicles
      2001 Audi TT 225 / 1990 Audi Coupe Quattro x2
      05-26-2012 11:14 AM #225
      hm, that's strange, i thought clutchnets red pressure plate was there high performance pressure plate.
      http://clutchnet.com/clutches?page=s...v.v2.tpl&pop=0


      can you guys get the yellow pressure plate? rated at 517 tq
      http://clutchnet.com/clutches?page=s...tegory_id=6513


      alongside this clutch disc; rated to go with the yellow pressure plate
      http://clutchnet.com/clutches?page=s...tegory_id=8437

      i can't see spending $950 ($400 more) for only 470 tq which is only 50tq over the clutchnet stg 2x
      2001 Audi TT 225 - DD mod list= http://www.cardomain.com/ride/3243695/2001-audi-tt
      1990 Audi Coupe Quattro - Project G6 classified

    16. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      1,984
      Vehicles
      92 Corrado SLC , 92 Audi S4
      05-29-2012 09:21 AM #226
      The clutchnet red 2x and the yellow pressure plates are the same. These are stock pressure plates that are modified ( heat treated fingers and larger rivit's). Compare the clutchnet to stage 2 in the southbend / DXD line.

      I would not push a stage 2 pressure plate past the 400-450 flywheel torque that sbc states their max was.For example 350-450 TQ will produce a fair amount of heat so Instead
      of being at the max of the stage 2 kit with a twin composite disc (faster wear) It would be better to use the stage 3 pressure plate and the organic disc as the car is street driven.
      This will hold the torque and the organic disc will have the longest life. Or A stage 3 pressure plate with a 4 or 6 puck design if you launch at 5500.

      The sachs race engineered pressure plate in the stage 3 kits is far different than the modified oem one in any of the stage 2 kits. Thicker friction surface also a higher ductile iron. Thicker reinforced diaphragm and fingers. Larger rivits and overall beefier plate.
      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    17. Member
      Join Date
      Feb 7th, 2009
      Location
      Central New York
      Posts
      556
      Vehicles
      2001 Audi TT 225 / 1990 Audi Coupe Quattro x2
      05-29-2012 07:29 PM #227
      Quote Originally Posted by FourSeasonTuning.com View Post
      The clutchnet red 2x and the yellow pressure plates are the same. These are stock pressure plates that are modified ( heat treated fingers and larger rivit's). Compare the clutchnet to stage 2 in the southbend / DXD line.

      I would not push a stage 2 pressure plate past the 400-450 flywheel torque that sbc states their max was.For example 350-450 TQ will produce a fair amount of heat so Instead
      of being at the max of the stage 2 kit with a twin composite disc (faster wear) It would be better to use the stage 3 pressure plate and the organic disc as the car is street driven.
      This will hold the torque and the organic disc will have the longest life. Or A stage 3 pressure plate with a 4 or 6 puck design if you launch at 5500.

      The sachs race engineered pressure plate in the stage 3 kits is far different than the modified oem one in any of the stage 2 kits. Thicker friction surface also a higher ductile iron. Thicker reinforced diaphragm and fingers. Larger rivits and overall beefier plate.

      the pictures look different on them at least the fingers do (yellow vs red 2x)

      how about the clutchnet red pressure plate? that supposedly handles 600+tq?

      and from what i have read, the fiber carbon pressure plate is good for launches and says it has good life.

      when you say that it has a short life, do you mean it won't last 20k? or what? I don't want the organic because it won't be able to handle the launches, and i don't want the 6-puck because daily driving would be horrendous.

      why is the rating on the yellow 517 tq but it can't handle my power goals of max of 400whp? i'm doubting i'll get that high, maybe 350, gtx28 series and ethanol.
      2001 Audi TT 225 - DD mod list= http://www.cardomain.com/ride/3243695/2001-audi-tt
      1990 Audi Coupe Quattro - Project G6 classified

    18. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      1,984
      Vehicles
      92 Corrado SLC , 92 Audi S4
      05-29-2012 10:37 PM #228
      Clutchnet is not using real 02M images, I am.

      The red 2x or yellow 2x means 2200 pound clamp force these are all single diaphragm just like the OEM pressure plate and the sachs race engineered one.

      Clutchnet Red 2x or Yellow 2x would be very similar torque wise to South Bend DXD.



      400 Torque Organic Disc
      http://www.fourseasontuning.com/prod...7G19.0A5141671

      425 Torque with Kevlar Disc
      http://www.fourseasontuning.com/prod....21FST240SBLWF


      425-450 Fiber carbon/ organic Disc ( twin sided like the OFE from SBC )
      http://www.fourseasontuning.com/prod....21FST240SBLWF

      Also you gave me a HP figure, I need a torque figure from you.

      Can you please call or IM me a tel # and a good time to call. The last two kits are not on the site w/o a FW, however they can be sold for $120.00 additional as these disc's cost more than the organic as listed above.
      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    19. Member Slimjimmn's Avatar
      Join Date
      Apr 8th, 2006
      Location
      Rochester, MN
      Posts
      9,589
      Vehicles
      02 GTI 1.8t
      07-02-2012 09:02 PM #229
      well since I wont use ECS, and MJM screwed me the one time I used them, Maybe I will just have to order my clutch through 4seasons.

      What would u recommend for stg 2 chipped car stock turbo? I was thinking the $320 kit with single mass fw.
      the car is on an inclined driveway and up on jack stands in the front only
      02 GTI 1.8t:> 42DD 3" turboback, BFI full stg1 mount kit, Evoms CAI, Forge boost hoses, Tacotaco sidemount, Ebay TIP, IE 2.0 coil conversion, IE manual tensioner, 20th front brake conversion, IE emissions delete, 42dd catch can, Koni STR.t & WRD sport springs, Samco Coolant hoses, SMF vr6 clutch kit.

    20. Member Big_Tom's Avatar
      Join Date
      Aug 19th, 2007
      Location
      Orlando, FL
      Posts
      12,556
      Vehicles
      01 Jetta Wolfsburg Ed, 92 Honda Prelude Si JDM H22 Swapped
      07-02-2012 09:05 PM #230
      Quote Originally Posted by Slimjimmn View Post
      well since I wont use ECS, and MJM screwed me the one time I used them, Maybe I will just have to order my clutch through 4seasons.

      What would u recommend for stg 2 chipped car stock turbo? I was thinking the $320 kit with single mass fw.
      i have been running the standard vr6 clutch kit ur talking about since 2010 on the big turbo. it's an awesome kit, feels great and still hasn't slipped once yet to this day. i beat on it a lot too
      My Thread Fk AK Coilovers, Full 3" Exhaust, Custom FMIC, Forge Evo14 BOV, Forge Unos MBC, Forge Throttle Body Hose, GodSpeed Aluminum Radiator, Prothane Dog Bone Mount, BFI STG 1 Eng/Trans Mounts, Sachs VR6 Clutch Kit, TT Short Shifter, Siemens 630s, Walbro 255, DBB Garrett 50 Trim Turbo Kit, Eurodyne 630cc MAFLESS PAGPARTS FTW -- STEVEBILT.COM -- Integrated Engineering -- FourSeasonTuning.com Don't Buy Anything From *ChunkyPeanuts*

    21. Member Slimjimmn's Avatar
      Join Date
      Apr 8th, 2006
      Location
      Rochester, MN
      Posts
      9,589
      Vehicles
      02 GTI 1.8t
      07-02-2012 09:20 PM #231
      well I drive like a granny most of the time. so I think it will do good.

      I had the same kit on my old mk3 2.0 T with a o2a conversion and 14psi t3 .60 no problems and I beat on that pretty good.
      the car is on an inclined driveway and up on jack stands in the front only
      02 GTI 1.8t:> 42DD 3" turboback, BFI full stg1 mount kit, Evoms CAI, Forge boost hoses, Tacotaco sidemount, Ebay TIP, IE 2.0 coil conversion, IE manual tensioner, 20th front brake conversion, IE emissions delete, 42dd catch can, Koni STR.t & WRD sport springs, Samco Coolant hoses, SMF vr6 clutch kit.

    22. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      1,984
      Vehicles
      92 Corrado SLC , 92 Audi S4
      07-02-2012 09:52 PM #232
      Sachs VR6 kit with cast single mass flywheel $324.95 shipped with alignment tool.

      http://www.fourseasontuning.com/prod...code=K7003802F
      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    23. 08-01-2012 06:54 AM #233
      Sachs kit to go with with a solid fidanza flywheel? 1.8t stage 1ish... Don't plan on going any further?
      Looking for ONE Luff M1 19x8.5 5x112 et48 wheel... please let me know if you have one available.

    24. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      1,984
      Vehicles
      92 Corrado SLC , 92 Audi S4
      08-01-2012 02:48 PM #234
      Quote Originally Posted by ExtremeVR6 View Post
      Sachs kit to go with with a solid fidanza flywheel? 1.8t stage 1ish... Don't plan on going any further?
      What is the year, make and model of your vehicle?
      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    25. 08-03-2012 06:20 AM #235
      Quote Originally Posted by FourSeasonTuning.com View Post
      What is the year, make and model of your vehicle?
      1998 Audi a4 1.8tqm
      Looking for ONE Luff M1 19x8.5 5x112 et48 wheel... please let me know if you have one available.

    26. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      1,984
      Vehicles
      92 Corrado SLC , 92 Audi S4
      08-03-2012 12:17 PM #236
      The stock Sachs kit has a un-sprung disc for the oem dual mass flywheel, it will still work with a single mass flywheel.
      http://fourseasontuning.com/product...._code=K7020501

      South Bend stage 2 daily ( sprung hub organic disc for single mass flywheel)
      http://fourseasontuning.com/product....de=K70205-HD-O
      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    27. Member 1fast2liter's Avatar
      Join Date
      Apr 3rd, 2005
      Location
      beaver dam WI
      Posts
      1,063
      Vehicles
      2000 audi tt 180q
      10-20-2012 04:36 AM #237
      2000 audi tt 180 quattro. need a new clutch. have a fidenza 13 pond flywheel with the replacable insert. looking for a nice git that will hold right around 400wtq..... prefer somthing long life like a full disk or somthing i drive this on the street and drive it hard.. may launch with it too.... thanks
      infinity front,votex rear,st coilovers,eurodyne tapp 1000cc tuned,hks ssq bov, pte 5857 pagparts turbo kit with 38mm tial wastegate. spec stage 3, custom intake, bbm fuel rail, modded 225 exhaust,ecs bleeder block,mbc,fmic,bfi mounts,cm flywheel,front mount interccoler

    28. Member BRES's Avatar
      Join Date
      Jul 24th, 2009
      Posts
      794
      Vehicles
      Mk4 GTI, C7 3.0T Quattro, 335i
      12-13-2012 12:46 AM #238
      Quote Originally Posted by FourSeasonTuning.com View Post
      Sachs VR6 kit with cast single mass flywheel $324.95 shipped with alignment tool.

      http://www.fourseasontuning.com/prod...code=K7003802F
      Do you have this kit with 20lb flywheel?
      2012 335i Alpine White Loaded (his) - JB4, BMS downpipe, Active Autowerke Exhaust, ER FMIC
      2013 A6 Glacier White Metallic 3.0T Quattro Prestige (her's)

      MK4 GTI 1.8T with goodies (garage queen)

    29. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      1,984
      Vehicles
      92 Corrado SLC , 92 Audi S4
      12-14-2012 06:00 PM #239
      IM sent with additional information.
      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    30. Member BRES's Avatar
      Join Date
      Jul 24th, 2009
      Posts
      794
      Vehicles
      Mk4 GTI, C7 3.0T Quattro, 335i
      12-17-2012 11:46 AM #240
      Quote Originally Posted by FourSeasonTuning.com View Post
      IM sent with additional information.
      thank you for fast shipping
      2012 335i Alpine White Loaded (his) - JB4, BMS downpipe, Active Autowerke Exhaust, ER FMIC
      2013 A6 Glacier White Metallic 3.0T Quattro Prestige (her's)

      MK4 GTI 1.8T with goodies (garage queen)

    31. Member BRES's Avatar
      Join Date
      Jul 24th, 2009
      Posts
      794
      Vehicles
      Mk4 GTI, C7 3.0T Quattro, 335i
      12-17-2012 04:35 PM #241
      Holy crap! Unbelievable shipping!
      Ordered Friday after 5pm got it Monday 230pm.

      Big thanks!





      Sent from iPhone 5.
      2012 335i Alpine White Loaded (his) - JB4, BMS downpipe, Active Autowerke Exhaust, ER FMIC
      2013 A6 Glacier White Metallic 3.0T Quattro Prestige (her's)

      MK4 GTI 1.8T with goodies (garage queen)

    32. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      1,984
      Vehicles
      92 Corrado SLC , 92 Audi S4
      12-18-2012 02:25 PM #242
      Thanks!
      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    33. Member Big_Tom's Avatar
      Join Date
      Aug 19th, 2007
      Location
      Orlando, FL
      Posts
      12,556
      Vehicles
      01 Jetta Wolfsburg Ed, 92 Honda Prelude Si JDM H22 Swapped
      01-04-2013 01:48 PM #243
      Quote Originally Posted by BRES View Post
      Holy crap! Unbelievable shipping!
      Ordered Friday after 5pm got it Monday 230pm.

      Big thanks!





      Sent from iPhone 5.
      Four Seasons FTMFW
      My Thread Fk AK Coilovers, Full 3" Exhaust, Custom FMIC, Forge Evo14 BOV, Forge Unos MBC, Forge Throttle Body Hose, GodSpeed Aluminum Radiator, Prothane Dog Bone Mount, BFI STG 1 Eng/Trans Mounts, Sachs VR6 Clutch Kit, TT Short Shifter, Siemens 630s, Walbro 255, DBB Garrett 50 Trim Turbo Kit, Eurodyne 630cc MAFLESS PAGPARTS FTW -- STEVEBILT.COM -- Integrated Engineering -- FourSeasonTuning.com Don't Buy Anything From *ChunkyPeanuts*

    34. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      1,984
      Vehicles
      92 Corrado SLC , 92 Audi S4
      02-25-2013 02:17 PM #244
      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    35. Member Slimjimmn's Avatar
      Join Date
      Apr 8th, 2006
      Location
      Rochester, MN
      Posts
      9,589
      Vehicles
      02 GTI 1.8t
      02-25-2013 09:52 PM #245
      I like vag

      anywho, do the rear main seal kits you sell come with the lame oem paper style sealing lip or are they they rubber style with oil control spring?
      the car is on an inclined driveway and up on jack stands in the front only
      02 GTI 1.8t:> 42DD 3" turboback, BFI full stg1 mount kit, Evoms CAI, Forge boost hoses, Tacotaco sidemount, Ebay TIP, IE 2.0 coil conversion, IE manual tensioner, 20th front brake conversion, IE emissions delete, 42dd catch can, Koni STR.t & WRD sport springs, Samco Coolant hoses, SMF vr6 clutch kit.

    Page 7 of 8 FirstFirst ... 345678 LastLast

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •