Ripped out the entire vacuum system and designed it from scratch
Redid my turbo oil and coolant lines with good hose, and fire-wrapped them all
Installed HTA3076 turbo![]()
#1541
Was driving thru a parking lot didnt knowit was flooded sucked up water. Emptted cylinders like 20 tines of water. Drained oil started up drove it 20 miles did another oil change and flush. Put new plugs in and runs better then before
Sent from my Motorola Electrify using Tapatalk 2
infinity front,votex rear,st coilovers,eurodyne tapp 1000cc tuned,hks ssq bov, pte 5857 pagparts turbo kit with 38mm tial wastegate. spec stage 3, custom intake, bbm fuel rail, modded 225 exhaust,ecs bleeder block,mbc,fmic,bfi mounts,cm flywheel,
#1542
Ripped out the entire vacuum system and designed it from scratch
Redid my turbo oil and coolant lines with good hose, and fire-wrapped them all
Installed HTA3076 turbo![]()
Jeremy Brehm: Regina Wedding Photographer
'02 Audi TT 225 Build Thread - 2.0L - PTE6262 Daily @ 30PSI - 10.0:1CR - AEB @ 9000RPM - Maestro - RIP
'06 3.2Q A3 - Stay tuned!
#1543
Let's see some pictures of how you ran the hoses.![]()
It's not always about "racekar"...
.:46and2:.
#1544
Sex should be like a Civic; slow, obscene, and loud enough for the neighbors to hear.
#1545
It's nothing special guys - I'm not into engine bay bling. I did redo the whole fuel system in AN, but that's just because I don't want any failed fuel connections when I try to tune for 30-35PSI (75-80PSI fuel pressure!).
For the vacuum system, I ran one large hose off the intake manifold and Tee'd it into the brake booster (check valve of course), then into the 42DD vacuum manifold. Out from the manifold I only have my boost gauge, and the FPR boost reference line - everything else in my car has been yanked. The only other lines are from the N75 to the top charge air pipe, and the line off the waste-gate. Sooooo nice to have only a couple of vacuum lines to worry about. I can't say how long it took because I'm doing about two dozen other things at once!
I never posted a build thread here, so maybe I will when I get some time (I posted it on a local car forum).![]()
Jeremy Brehm: Regina Wedding Photographer
'02 Audi TT 225 Build Thread - 2.0L - PTE6262 Daily @ 30PSI - 10.0:1CR - AEB @ 9000RPM - Maestro - RIP
'06 3.2Q A3 - Stay tuned!
#1546
Dealership replaced my ignition coils for free.
DMV rejected my registration and required correction for the ignition coil recall.
#1547
Thermostat housing. Terrible without taking the front end off.
Sent from my DROID RAZR using Tapatalk 2
#1548
#1549
#1550
Maybe he means long wobble hex bits! I don't know how anyone works on these cars without these!
Jeremy Brehm: Regina Wedding Photographer
'02 Audi TT 225 Build Thread - 2.0L - PTE6262 Daily @ 30PSI - 10.0:1CR - AEB @ 9000RPM - Maestro - RIP
'06 3.2Q A3 - Stay tuned!
#1551
#1552
Agreed, absolutely terrible. Did timing belt, water pump, thermostat. To do, headliner, coilovers, intake, exhaust.
#1554
Love those wheels.I have always been a fan. What are the specs?
Last edited by Forty-six and 2; 05-14-2012 at 12:28 PM.
It's not always about "racekar"...
.:46and2:.
#1555
I remember you guys from Wuste 10'.. diggen the yellow wheels.
#1556
Looking forward to meeting up with you at Surprise on Thurs to cruise to Vegas with you.
#1559
Trans is done![]()
2001 225Q (Function Car): APR Stage 3+, APR 3' Exhaust System, Brembo Brakes, Koni Suspension
2003 180 (Form Car): Rokkor Coilovers,Custom Front Single Frame Bumper with A8 Grill Votex Sideskirts, Votex Rearlip, Axis Penta 19' Wheels, 2 Rockford Fosgate 15' Subwoofers
#1560
9.5 8.5 235/35 R19 Nitto Invo x4. H&R wheel adapters (wheels are for a real Audi ... not a TT) Biff
#1561
#1562
5 x 112.. I know brian A3 the guy you got those wheels from
#1563
#1564
Oh boy lol
#1565
Megans lower control arms are now on. No more -3.9* of camber.
Wheels are being powdered tonight.
Ahh skeet skeet
#1566
infinity front,votex rear,st coilovers,eurodyne tapp 1000cc tuned,hks ssq bov, pte 5857 pagparts turbo kit with 38mm tial wastegate. spec stage 3, custom intake, bbm fuel rail, modded 225 exhaust,ecs bleeder block,mbc,fmic,bfi mounts,cm flywheel,
#1567
Parked the TT at the in-laws until the end of the month.Bought a commuter car and there's only room for 1 car at the condo. Moving June 1st into the house..
| BENPURKISSDESIGN |
STANCE - Related words:
hellaflush-hellafail-stanced-stancing-mental retardation-beaners etc.
#1568
Now you can put more money into it and have a show car![]()
#1569
I wish.
It just got some paintwork treatment so I probably won't do anything until insurance is off it in the fall.
| BENPURKISSDESIGN |
STANCE - Related words:
hellaflush-hellafail-stanced-stancing-mental retardation-beaners etc.
#1570
#1571
#1572
Vw and Audi should just stop being gay and change everything to 114.3. JDM fittment is much more popular with way more wheel choices. 5x100 and 5x112 are worthless IMO
#1573
| BENPURKISSDESIGN |
STANCE - Related words:
hellaflush-hellafail-stanced-stancing-mental retardation-beaners etc.
#1574
| BENPURKISSDESIGN |
STANCE - Related words:
hellaflush-hellafail-stanced-stancing-mental retardation-beaners etc.
#1575
Got tinted.![]()
You don't own a TT, you support it: 2001 LZ7W coupe; REVO chip; Forge hoses and DV relo; MadMax DV; Modshack VTDA; BlueFlame Catback, OSIR corners, Forge bling, H&R, Bilsteins, DEFCON2, 986 seats, 18in OZ Vela II; OEM TTQS alcantara steering wheel, knob, ebrake; OEM: BBS RS IIs; roof rack; trunk rack; phone bracket; trunk mat; all weather floor mats; 4-piece Votex kit. My Mods here: http://public.fotki.com/TTQ2K2/. 2007 3.2 S-Line A3.