What did you do to your TT today?

[Neb]

you weren't tinted before?

Pics!

[PLAYED TT]

Fishbowl for life! Then again living in Texas would be a different story.

[1.8 skeet skeet]

Got timing belt installed, IE Rods Installed, All new Gaskets, New Piston Rings, Bought all new rod bearings, A bunch of other little stuff that I don't remember!

Now just shopping for horsepower

[BigBlackTiTTy]

Vw and Audi should just stop being gay and change everything to 114.3. JDM fittment is much more popular with way more wheel choices. 5x100 and 5x112 are worthless IMO

YES ! i like the way you think

2012 Civic with leather, sunroof and Nav. Almost as good gas mileage as the VW TDI too.

nice,... is this something that the wife can drive too

[Morio]

Since my seats arrive on Thursday (which should finish off my interior)...... I bought stuff to begin cleaning up the engine bay

IE adapters, tsi coil packs, whanab cap covers (strut, coolant, oil, etc), forge charge pipe (no nipple for dv since I already relocated it) ..... Plan to polish the intake manifold and the charge pipe.....

[warranty225cpe]

Since my seats arrive on Thursday (which should finish off my interior)...... I bought stuff to begin cleaning up the engine bay

IE adapters, tsi coil packs, whanab cap covers (strut, coolant, oil, etc), forge charge pipe (no nipple for dv since I already relocated it) ..... Plan to polish the intake manifold and the charge pipe.....

Yeah, I'm concentrating my efforts in the same area. I bought the IE valve cover breather and block breather adapters so I can make some AN fitting lines to run to my 42dd catch can. I want to do something about my charge pipe as well. Can't wait to get all this stuff back together. Wrinkle black powder coat and IE red is gonna look pretty bad ass. Next big/ugly object I want to address is the intake manifold. But I think I wana do an exhaust mani at the same time.

This **** is expensive..lol

[l88m22vette]

Get that ****in Honda outta this TT thread

[Neb]

YES ! i like the way you think

nice,... is this something that the wife can drive too

Hells yes, auto > stick in stop and go traffic.

Get that ****in Honda outta this TT thread

Don't hate!

[Forty-six and 2]

Put on a Cupra lip. Just shows me how bad it needs lowering...

[Morio]

Installed new seats

[Chuckmeister87]

Morio, how do they feel? What's the ride like?

[TTC2k5]

Installed new seats

Morio,

they look awesome. Well done, my friend.

bob

[Morio]

Morio, how do they feel? What's the ride like?

They feel awesome!!!

Morio,

they look awesome. Well done, my friend.

bob

Thanks man!! Your site helped me a lot!! I couldn't find 4.7 ohm so I did as you suggested and parallel 2 10ohms.... And it work fantastically! No airbag light!! I owe you a beer

[TTC2k5]

They feel awesome!!!



Thanks man!! Your site helped me a lot!! I couldn't find 4.7 ohm so I did as you suggested and parallel 2 10ohms.... And it work fantastically! No airbag light!! I owe you a beer

Cheers...I'll take you up on that beer next time I'm down south.

[ConnorMc]

Painted my brakes and put on some new wheels.

[Audiguy84]

So leaving my second TT stock isn't working out for me as well i hoped it wouldn't

just picked up these light as hell 19"s - SSR GT3 3 piece wheels





the plan is to refinish the lips and barrels (polished) and paint the faces white.

[PLAYED TT]

Changed the fluids

[BigBlackTiTTy]

Cleaned!!!!





Even the ass

hey morio, so are these seats comfy ?

[trixx]

this weekend, i did an oil change, replaced the temp switch and cleaned the hell out of the interior

hopefully I'll be doing my R brakes next weekend

[PLAYED TT]

Still waiting on the throttle body. If my driveway wasn't on a hill I would push it out and wash it

[jwalker1.8]

From this





to this over the past week...suspension next week



TRUST ME, I know it looks like **** at this ride height...leaving for Vegas so no time till next week to get the coils on.

[warranty225cpe]

Looks good JW

Wheel brand and specs (incase I missed it).

[DaCabrioGuy]

Can anyone help me in figuring out if running et 28 in the front and et 22 in the rear on an 18x9 wheel all around is going to clear my suspension?

[Neb]

You may need a spacer up front but you should be ok in the rear.

[DaCabrioGuy]

You may need a spacer up front but you should be ok in the rear.

Ok well unfortunatly those et's are after 24mm spacer up front and 30mm spacer in the rear. How close is it going to be in the front?

[euroguy666]

Ok well unfortunatly those et's are after 24mm spacer up front and 30mm spacer in the rear. How close is it going to be in the front?

http://www.senebdesign.com/Auto/TT-offsetcalc.htm

That'll tell you... its its gonna hit it'll tell you the spacer size u need to add

Sent from my DROID RAZR using Tapatalk 2

[DaCabrioGuy]

http://www.senebdesign.com/Auto/TT-offsetcalc.htm

That'll tell you... its its gonna hit it'll tell you the spacer size u need to add

Sent from my DROID RAZR using Tapatalk 2

Thanks for that link. I actually used that earlier today. Will it say in words that it will hit?

[euroguy666]

Thanks for that link. I actually used that earlier today. Will it say in words that it will hit?

No, but in the section that says spacer it'll give u the size to just clear

Sent from my DROID RAZR using Tapatalk 2

[jwalker1.8]

Looks good JW

Wheel brand and specs (incase I missed it).

Thanks, Miro STP-3 19x8.5 et45 w/25mm spacer front, 19x9.5 et45 w/20mm spacer back

[xattica]

Today I changed my Avant 2000 for a 2000 TT Coupe plus $$$...
So Im ready for the mods.

[taverncustoms]

deleted my muffler on my 180q and gained some power+spool time

[1fast2liter]

Did u take out the resonator too? I took it all out installed a thrush turbo muffler and still to quite

Sent from my Motorola Electrify using Tapatalk 2

[taverncustoms]

Did u take out the resonator too? I took it all out installed a thrush turbo muffler and still to quite

Sent from my Motorola Electrify using Tapatalk 2

no just the muffler and its about the same on the inside but more noise outside check you tube there are some vids there. its my Daily driver and i wanted it mild sounding.

thrush are garbage IMO get a cherrybomb votex

[180dan]

Switched my DB bushings with Powerflex. Succeeded in getting rid of the DP rattle but feels a little ruff on the freeway and going up hills fast. I don't mind the vibration through the steering wheel but it feels pretty bad coming up through the floor. Anyone know if DB bushings break in and soften up a bit? I definately noticed way less wheel hop with my FWD

[SteveAngry]

Switched my DB bushings with Powerflex. Succeeded in getting rid of the DP rattle but feels a little ruff on the freeway and going up hills fast. I don't mind the vibration through the steering wheel but it feels pretty bad coming up through the floor. Anyone know if DB bushings break in and soften up a bit? I definately noticed way less wheel hop with my FWD

As long as you installed them correctly you should be ok soon. I have the power flex DB bushing also and had similar vibrations as you did for the first 3-4 days. Now a month later everythings smooth except when I leave from a stop. Have to give it a little more revs to smooth out the vibrations from takeoff. No noises or vibration at idle or WOT. HTH.