*** ABF Serpentine Belt Conversion KITS & T6061 Lightened Pulley's ***

[dubinsincuwereindiapers]

4th of July bump for Issam and INA

[INA]

Aaron Crossley's monster Audi Coupe running our Drag set up!!
Notice the larger diameter alternator pulley!

[sawedoffgolf]

We got a mk4 ALH TDI, would the lightweight pulleys work on my vehicle?

[INA]

Quote, originally posted by sawedoffgolf »

We got a mk4 ALH TDI, would the lightweight pulleys work on my vehicle?

On the power steering and alternator only.
Send me an email for this.

[DogDiesel]

INA,

Tomorrow in this post is now one year later.

Is this available?

AFN kit or parts.

Wayne

[INA]

Quote, originally posted by DogDiesel »

INA, Tomorrow in this post is now one year later. Is this available? AFN kit or parts. Wayne

Send me an email. I have sold a few of them but the brackets are hard to come by.

[INA]

Vortex at 80% functionality bump!

[INA]

[CDJetta]

Full serp belt conversion pics? I just need the stuff to get my water pump and p/s onto the serpentine belt setup.

If no pics can you at least make it clear what... 3 items we need? Belt, P/S Pulley, Water pump Pulley.

I'm sure the vr6 water pump pulley is what is needed to do that water pump on ours but I'm not so sure on the P/S pump. Gruvven sells an Mk4 serp belt pulley setup, could I buy his under drive p/s pump pulley and then swap a belt on?

[INA]

Full serp belt conversion pics? I just need the stuff to get my water pump and p/s onto the serpentine belt setup.

If no pics can you at least make it clear what... 3 items we need? Belt, P/S Pulley, Water pump Pulley.

I'm sure the vr6 water pump pulley is what is needed to do that water pump on ours but I'm not so sure on the P/S pump. Gruvven sells an Mk4 serp belt pulley setup, could I buy his under drive p/s pump pulley and then swap a belt on?

The P/S pulley will ALWAYS be v-belt unfortunately.

[CDJetta]

There's nothing that can be made or designed to get it onto the serpentine belt setup?

[INA]

There is but it requires a completely new cast bracket.

Since 2006 I have sold over 200 of these ABF kits. In order to cast up a bracket with the PS pump I would need at least 200 minimum quantity to cast.
It just wouldnt work out.

[CDJetta]

So can you get all the parts except for the bracket and if so how much are all the parts? I can make brackets all day myself.

[justvwpower]

this AFN setup u speak of.......wud it /cud it be used on an 16v setup with the external w/p ????

[INA]

So can you get all the parts except for the bracket and if so how much are all the parts? I can make brackets all day myself.

Yes I can
email me

this AFN setup u speak of.......wud it /cud it be used on an 16v setup with the external w/p ????

yes it can but it pushes the alternator out more because of the diesel fuel pump clearance.

[Th3GreatOne]

Issam,
why aren't you answering my messages or returning my calls? It's been 1 month I am waiting for this damns piston clip. Feels like you are making fun of me. Questioning myself if you even shipped them in the first place...

[justvwpower]

hey all ....i have managed to make an all i one serp setup for the 16v......trying to post pix ....and yes this includes the P/S and W/P and A/C

[justvwpower]

follow my set up here ....dont meant to hijack ur thread Issam ...sorry ....not gud at the forum thingy and posting pix so bear with me
http://forums.vwvortex.com/showthread.php?5004568-MEGASQUIRT-IN-JAMAICA........my-family-car-turned-project

[justvwpower]

hey Issam think u cud make pulleys like these take a look at the pix in my thread probly u can make them for ur customers http://forums.vwvortex.com/showthread.php?5004568-MEGASQUIRT-IN-JAMAICA........my-family-car-turned-project

[INA]

I am sure I can if the demand was there.

[Glegor]

Aaron Crossley's monster Audi Coupe running our Drag set up!!
Notice the larger diameter alternator pulley!

this car is pure friggen sex.. makes you get a little chubb just looking at it.. got an up close and personal at pacific waterland.

[INA]

Yes it is sexy.

[ventorocket]

I wanna use this setup on my 1.9td indirect injection. I wanna maintain my tach thou. Will it work if i use the stock crank serpentine pulley and clutched alternater pulley? I tensioner setup is shot and took out my crank. Thanks VW

[INA]

I wanna use this setup on my 1.9td indirect injection. I wanna maintain my tach thou. Will it work if i use the stock crank serpentine pulley and clutched alternater pulley? I tensioner setup is shot and took out my crank. Thanks VW

Are you keeping the A/c or no?
Which engine code you have? IZ or AAZ?

[ventorocket]

No ac and no powersteering. Just alt and waterpump. Engine code aaz.

[INA]

No ac and no powersteering. Just alt and waterpump. Engine code aaz.

Perfect
you can use the clutch'ed alternator pulley from your set up but we dont supply one.
Sounds like all you will need is the water pump pulley , the bracket and the alternator.
if so then send over an email and we will get an order going right away

[QuantumSyncro]

the "W terminal" is the only way to get a tach reading on an older diesel, ie, non-TDI, since we don't have any sort of ignition system on the car to tap into for that.

TDIs should get their tach reading off the crank angle sensor, but people doing mechanical TDI swaps or running 1.6Ds, 1.6TDs, 1.5Ds, 1.9Ds, or 1.9TDs, need the W-terminal to get a tach reading.

and since all of these diesel engines are basically the same (basic 8V VW) this kit would work on the other engines.

not everyone needs the W-terminal, however, only if the car has a tach.

the dynamic oil pressure sensor requires an rpm signal, even on non-tach cars, so regardless of whether there's a tach there needs to be a W terminal.

[INA]

the dynamic oil pressure sensor requires an rpm signal, even on non-tach cars, so regardless of whether there's a tach there needs to be a W terminal.

Thank you for that

[ventorocket]

My car has a tach and i have clutched pulley and vr6 waterpump pulley. Just need bracket and alternator and info on witch belt to use. This is deff gonna clean up my engine compartment!

[INA]

Taking a minute from this holiday break to whore out Chris Preen's gorgeous ABF kit with his own custom modification to the bracket. Good show Chris!

[Sales@INA]

All pms replied

[INA]

All PM's Replied to. Thanks for the support!

[ventorocket]

Can you please post a pic of the afn kit.

[INA]

Can you please post a pic of the afn kit.

Dont have any right now unfortunately.

[Sales@INA]

Hello Everyone!
Issam is on his honeymoon and will be back shortly. All orders placed will be processed upon his return. If you're checking the status of an already placed order, please send us an email at iabed@inaengineering.com and he will get back to you as soon as he can. If anyone has any product inquiries or tech questions, as always feel free to pm me.

Thanks
Isaac