There used to be a thread for these areas, was quite long. Did everyone move away, graduate, or what?
#1
There used to be a thread for these areas, was quite long. Did everyone move away, graduate, or what?
#3
I am going to be a freshman at Tech this fall.
#4
i'll be there. moving in end of august.Here's the car if you see it around.
Post pics of your car!
Formally : 05slvrstonegray1.8t
PM me for services..
Bodywork (molding/shaving)
Coilover installs , Air installs
Vag Com Scans
#5
Quote, originally posted by 05slvrstonegray1.8t »
Post pics of your car!Clean Silverstone, it's one of my favorite colors on the MKIV.
The rubstrips look good str8jakett.
Modified by Wimbledon at 7:59 AM 8-1-2008
#6
Quote, originally posted by Wimbledon » The rubstrips look good str8jakett.
Thanks! Put the last one on today (ran out of tape yesterday), I'm very happy with the results. That means the car is put back together except for the headliner. Beach trip starting Saturday, so once I get back I've got to finish up.
If you end up with a blue lagoon GLI I'm going to have to kick a dent in it to make myself feel better. My all time fav!!
#7
Quote, originally posted by Grannigan » I am going to be a freshman at Tech this fall. Me too.
![]()
Hopefully I'll start meeting all you guys in August/September. Is there a regular enthusiast meet at Tech? And how's the Audi community?
#8
There used to be a regular meet on Sundays but I haven't seen anyone from the old thread post except lumns. We'll put something together, if you guys can handle a 27 year old family man non-student working something up![]()
![]()
#9
Quote, originally posted by str8jakett » We'll put something together, if you guys can handle a 27 year old family man non-student working something up
![]()
![]()
#10
Quote, originally posted by str8jakett » There used to be a regular meet on Sundays but I haven't seen anyone from the old thread post except lumns. We'll put something together, if you guys can handle a 27 year old family man non-student working something up ![]()
![]()
If you guys check out carclubvt.com there seems to be lots of meets and gatherings already. The first show is sept. 27th i believe.
the vt car club is open to any make of car's but there are a couple VW's on there already. We can always setup just VW events if you guys wanted to. Like photoshots, events (dinner, pong, etc)
Formally : 05slvrstonegray1.8t
PM me for services..
Bodywork (molding/shaving)
Coilover installs , Air installs
Vag Com Scans
#11
Nice!
But currently:
Playing around with some cheap mods and trying to get rid of those wheels.
There used to be a quite a few people around here, although I never met any of them in person. Tried to make it to some of their Sunday meets but I was just really busy at that time. Glad to see some people are coming to the area.
#12
Nice.Some cheap mods you could do easily yourself with just a little time.
- Joey mod headlights.
- headlinerand then some that involve a little big of $
- intake
- bumper markers
- fender markers
After that its pretty much time to spend the big bucks
Formally : 05slvrstonegray1.8t
PM me for services..
Bodywork (molding/shaving)
Coilover installs , Air installs
Vag Com Scans
#13
Join WunderWagens.com We are in UVA area and goto JMU / Virginia tech shows. Very calm very chill people who like to have a good time multiple club events and we merge with other clubs.![]()
![]()
#15
Dude you def. have to help me take apart my headliner and rewrap it. Cause i have NO idea how to take all that ish apart. haha.And finally, someone in the area who has a spot and tools to work on the car. I was worried i'd be stuck in the school parking lot with minimal tools.
![]()
Formally : 05slvrstonegray1.8t
PM me for services..
Bodywork (molding/shaving)
Coilover installs , Air installs
Vag Com Scans
#16
#17
Quote, originally posted by 05slvrstonegray1.8t » Dude you def. have to help me take apart my headliner and rewrap it. Cause i have NO idea how to take all that ish apart. haha. And finally, someone in the area who has a spot and tools to work on the car. I was worried i'd be stuck in the school parking lot with minimal tools.
![]()
Love to help, but I'm no expert, this is my first time around for everything as well. I can definitely tell you what not to do!
![]()
Houston - I joined up as well, but haven't looked around much. Seems like a nice place and some fun times. Nice JTi!
I'd really started to go stale on my car the past couple of years and I was to the point of wanting to trade it, but instead I got laid off of my job for a few months and the boredom set in. Worked out good for the car though.
Modified by str8jakett at 2:40 PM 7-28-2008
#18
hey.graduated last dec. probably not gonna be down there too much. jus due to work and gas prices.
def look up carclubvt.com look for a member known as "the oracle" he should b able to help ya.
2010 VW CC 3.6L 4motion - STOCK
2000 BMW ///M Roadster - Dinan Tuned
Gone - 07 MKV GTI - Stage II unitronic, Full Eurojet TBE, EBC slotted rotors & pads, neuspeed intake
#19
Hey, what ever happened to that original Virginia Tech thread? I'd be surprised if it just died out.
#21
this saturday? Richmond is a far drive for just a g2g lol
Formally : 05slvrstonegray1.8t
PM me for services..
Bodywork (molding/shaving)
Coilover installs , Air installs
Vag Com Scans
#22
Well we are taking picture with Richmond dubs at 5pm then they got the hook up at the local VW dealer to clear out a spot for us so we can chill have pizza and check out some of the new cars. Should be fun!!
#23
Quote, originally posted by str8jakett » Hey, what ever happened to that original Virginia Tech thread? I'd be surprised if it just died out. yea it used tobe one of my watched topics. went to post something one day and it was gone and i couldnt find it again
2010 VW CC 3.6L 4motion - STOCK
2000 BMW ///M Roadster - Dinan Tuned
Gone - 07 MKV GTI - Stage II unitronic, Full Eurojet TBE, EBC slotted rotors & pads, neuspeed intake
#24
Sounds like a fun meet, headed to the beach that day though. Plus, the car will probably still be in pieces until I get back.
#25
Just a few of the progress:
Still have to reinstall the rub strips on the side, and then tackle the headliner, which scares me.
Ahh yes, and one only the VW guys will get:
![]()
#26
Quote, originally posted by Houston24V » Parham Road..... Is where we are meeting Is there a address? i dont know any of the locations/streets in Richmond.
Quote, originally posted by str8jakett » Still have to reinstall the rub strips on the side, and then tackle the headliner, which scares me.
Get on it! haha. You need to be pro at it, we got mine to do soon
![]()
Formally : 05slvrstonegray1.8t
PM me for services..
Bodywork (molding/shaving)
Coilover installs , Air installs
Vag Com Scans
#27
5PM Here...... Google it!!! Hope you can make it outSanko Auto Parts & Repair
3716 W Broad St
Richmond, VA 23230
#28
wow ur cruising all the way down to richmond.u should jus hit up the arlington gtg.
its been flat lining for al il bit...but a revival is in process
2010 VW CC 3.6L 4motion - STOCK
2000 BMW ///M Roadster - Dinan Tuned
Gone - 07 MKV GTI - Stage II unitronic, Full Eurojet TBE, EBC slotted rotors & pads, neuspeed intake
#29
not going to make it. Have work all day.
Quote, originally posted by lumns » wow ur cruising all the way down to richmond. u should jus hit up the arlington gtg.
its been flat lining for al il bit...but a revival is in process
i wasnt going for just the g2g. Was suppose to go down there to pick something up as well so i thought i'd swing by the g2g. I've been to the arlington g2g along time ago. Was 7 cars or so only and after that it just died out i think.
Formally : 05slvrstonegray1.8t
PM me for services..
Bodywork (molding/shaving)
Coilover installs , Air installs
Vag Com Scans
#30
i am going to be down at tech this weekend.
though u wont see a mkv veedub rolling through. instead u will see a sexy chevy enterprise cargo van lol
2010 VW CC 3.6L 4motion - STOCK
2000 BMW ///M Roadster - Dinan Tuned
Gone - 07 MKV GTI - Stage II unitronic, Full Eurojet TBE, EBC slotted rotors & pads, neuspeed intake
#31
Bumpage to keep this thread on my list. Just got back from OBX, what's new guys?
#32
Quote, originally posted by str8jakett » Bumpage to keep this thread on my list. Just got back from OBX, what's new guys? My friend just got back from OBX, said it was cool.
I went there a few years ago myself.
#33
Quote, originally posted by Wimbledon » My friend just got back from OBX, said it was cool.
I went there a few years ago myself.
I really enjoyed it, very relaxed compared to Myrtle.
I need an inspection. I wonder what they will try to make me replace this year.
#34
2010 VW CC 3.6L 4motion - STOCK
2000 BMW ///M Roadster - Dinan Tuned
Gone - 07 MKV GTI - Stage II unitronic, Full Eurojet TBE, EBC slotted rotors & pads, neuspeed intake
#35
When will everyone be here? Drove through Blacksburg yesterday and it was starting to get busy.Update picture, stock wheels back for now, headliner still out, budget might kill that project for a while.
Modified by str8jakett at 11:59 AM 8-20-2008