wow
#1
Earlier this summer I started (and finished) my "stage 3" allroad project. Here is the play-by-play:
The way it arrived at my shop. 2002 allroad 2.7T 6-speed. 72k miles.
trim and bumpers removed for colormatching
engine prepped for removal
engine removal complete
stock clutch and turbos visible
one of the stock downpipes with pre-cats is visible beside the transmission. The pre-cats will be gutted to improve flow
19" Hartmann G5 Lamborghini Gallardo replicas
crankshaft
new rear crank seal and flange
new front crank seal
new upper and lower oil pan seals (white silicone)
new timing belt installed
right turbo installed
left turbo installed
new after-run pump
Sumitomo HTR ZIII (245/40-19) tires mounted
RS4 motor mounts
left turbo inlet pipe (with insulation wrap)
"Piggie" downpipes
the lightweight flywheel, the front motor "snub" mount, the intake manifold spacers and the lengthened rear O2 sensors
intake manifold installed with phenolic spacers (yellow)
lightweight flywheel and RS4 clutch installed
motor installed
amber reflectors removed from headlights. Right: before. Left: after.
RS4 intake installed (airbox, MAF, intake pipes)
AWE Tuning intercoolers installed
test fitting the wheels
radiator support, headlights, bumper and fender flares installed
city lights
Russian plate
6-pot Porsche calipers and 14-inch floating rotors
brakes installed
AWE Tuning drivetrain stabilizer installed
resonator removed, new mufflers
ClutchMasters FX400 stage 4 clutch kit. The RS4 clutch did not hold up... This is the new stage 4 clutch that went in instead.
clutch done, 18% tint done, lowering done
Defi boost gauge installed
on the dyno at EPL
All-wheel horsepower (red): 352.7 (crank equivalent 440.8)
All-wheel torque (blue): 394.1 (crank equivalent 492.6)
Black is air/fuel ratio
The final specs:
K04 turbos
EPL fueling and chip tuning
RS4 air intake
VAST Performance phenolic intake spacers
AWE Tuning intercoolers
AWE Tuning drivetrain stabilizer
RS4 motor mounts
VAST Performance snub mount
Clutchmasters Stage 4 clutch
VAST Performance lightweight flywheel
Piggie pipes
Custom catback
Porsche Cayenne Turbo 6-pot brake calipers
ECS Tuning floating rotors
19" Gallardo replica wheels
H-Sport front and rear swaybars
Colormatched bumpers and flares
Black tint
6000k Xenon bulbs
Defi boost gauge
#3
Kudos. Some very very nice work. I never imagined the those G5's to look like that (I like and I am pretty darn picky)So when should I ship over my ar to you
![]()
#4
very nice! thats something I can see myself doing if I got carried away with an allroad, hah.I'd love to see what kind of numbers that thing can pull off in the 1/4 mi
#5
wow.wow, wow, wow!
that's awesome!
i love what you did there.... HOT allroad. the wheels, the color-matching. looks excellent. you basically built your own RS6 with air suspension.
did you do all the labor yourself? where did you purchase all your parts? were the turbos and other engine upgrades a "kit" from somewhere or did you piece everything together? and how much down-time did you have?
GREAT work though. i LOVE it.
![]()
![]()
![]()
#6
Thanks!
I did everything myself, except painting the body bits.The parts were sourced from various wholesale suppliers that I use for my business, as well as places like Achtuning (wheels), TireRack (tires, sways), AWE Tuning, VAST, ECS Tuning and EPL.
The project probably took 2 months of working on it in my spare time.
#7
![]()
Wow, those are the first wheels not made for the allroad I've thought go really well. What a combo, I'm quite picky about the wheels and I gotta say thats awesome. I only dream of being able to afford the mods to do a project on my engine like that.
#8
well this wins best thread of the year in the allroad forum.![]()
![]()
![]()
#10
ACHTUN!NG | Hartmann Wheels » follow us on facebook
14515 NE 91st St. STE 7 Redmond, WA 98052 • 425.895.0000 • info@achtuning.com
We are the LARGEST APR stocking distributor!
#11
Quote, originally posted by BabyFoodYellowGTI » well this wins best thread of the year in the allroad forum. ![]()
![]()
![]()
you need to do that
Nice writeup, car looks amazing
#13
oh lawdy!! I might have to go home and change myself, my panties feel wet!beautiful car!!!
#14
Quote, originally posted by vr6ninja » ![]()
Wow, those are the first wheels not made for the allroad I've thought go really well. What a combo, I'm quite picky about the wheels and I gotta say thats awesome. I only dream of being able to afford the mods to do a project on my engine like that.
my thoughts exactly. possibly the hottest AR i've ever seen. makes me wanna play the lotto!
#16
Current: 2011 Jeep Grand Cherokee 5.7 Hemi 4x4, 2013 BMW 650GS Sertao, BMW 1150RT
Gone: 2010 Audi S4; 2008 GTI; 2007 Audi A6; 2004 Audi allroad 2.7T; 2001 Audi A6 2.7T; 1999.5 Mk4 Jetta VR6; 1991 Jeep Cherokee 4.0 4x4
#17
My god that is beautiful!![]()
"Do you know the terror of he who falls asleep?
To the very toes he is terrified, because the ground gives way under him, and the dream begins."
~Friedrich Nietzsche
#18
Quote, originally posted by Gberg888GLI » how much it cost to do all that?? yeah, if you don't mind, i think there's a few of us interesting in possibly saving up for doing something like this. you got a cost break-down?
#19
i mean i know the rs4 ko4 turbo kits is like close to 4 grand... plus another 1g for the intercoolers... then there is the labor which is the killer on a 2.7tt... gotta take out the enigne to do almost anything... then there is the exhaust which was prob 1500... soo...
#20
Cost: too much! Even with free labor (I work on it myself), I spent more than the car was worth at the start.You could probably make one that's almost as fast for 6-8k in parts. That won't include clutch, brakes, wheels, suspension, body stuff, but it will haul ass.
#21
8k on the engine...
wheels were what? They are reps so prob not more than 1400... and thats alot... the real set of the gallardo wheels i heard were 5k...
What did u do to suspension?
clutches really arent that much.. maybs a grand... with flywheel...?? i could be wrong i dont really know...and what body stuff? removing orange turns and painting the plastic?
how much u buy the car for?
Modified by Gberg888GLI at 8:55 PM 9-18-2008
#22
I spent more than 8k on the engine. Like I said, for 8k you can make one *almost* as fast.
#23
first time I've seen another allroad completely matched.. Did you leave the roof gray? We have twins haha. You got one up on the engine though. Thats nice work man.![]()
#24
i just need to find a 6sp now and dream about doing this, because it'll never happen for me!
btw, fwiw i LOVE the city lights on there, and the look. any future additions? or is this build "done" (for now!)
i heart avant.
#25
I know this is an old thread but is is an update with fresh pics possible. I cant see the old ones.
#26