Tamiya EB GTI Cup.
Has LED headlights & tails. Will come with radio and original box.
Link to Info - http://www.robitronic.com/protos-18-buggy-en.html
Played with it for a month or two, then got a new job that is eating up all my free time. Regretfully, I don't have time to play with it anymore.
Location - Ahwatukee (Phoenix) AZ
Give me an offer. Great little r/c car.
Last edited by ladykiller; 08-15-2013 at 06:43 PM. Reason: need to sell
i have nerd tendencies
i work in a world of shoulds (>ლ)
Just sold my 2005 1.8t gti and have many parts left over CLICK FOR PICS OF WHAT I HAVE ---> http://s57.photobucket.com/albums/g2...pl/For%20Sale/
Has working lights too!!Fs: brand new just finished tamiya drift car. Multiple sets of wheels rs's work wheels etc. lipo batt brushless. Motor and esc.
http://facebook.com/kddesignsri Airlift Dealer Contact Me For Pricing
Bagging The Best Fixing The Rest
FS / trade HPI Savage Nitro RC + extras
Clean HPI Savage 4.6x, complete ready to go $360 or trade.
Within the last 2 tanks of fuel:
NEW 2 speed complete transmission
NEW complete bulletproof differentials, housings, bearings, and hardened outdrives
New Robinson Racing hardened clutch bell
New spur gear
New fuel filter
New air filter and prefilter
New fuel lines
Over $150 in maintenance / updates just completed
RPM center bash guard
JR high torque steering servo
Strong 4.6 motor (about 2 gallons of O’Donnell speed bland 20% through it) with a pull start. Original roto start motor plate and roto electric started included with a good battery.
Truck is in great shape; no mechanical / electrical issues or flaws. Near new tires, perfect drive shafts, perfect chassis, etc. It is also very clean (no dirt or muck on it). There are abrasions on bumpers, chrome pealing on wheels, and body is in rough condition however… all normal, cosmetic issues.
I am running a dx3e radio on this rig; it will not be included with the sale. I can however, make it ready to run by installing a Traxxas tq2 radio system, or installing a Flysky 2.4ghz receiver, or of course use your existing high end radio.
The truck will also include roughly $250 in extra parts, pieces, accessories, and nitro related items.
2 glow starters, one “C” and one “D”
10+ glow plugs in a custom made wood carry case (over $80 just here)
2 fuel bottles
glow plug wrench
1/3 gal of O’Donnell speed bland 20%
8+ one way bearings
1 complete diff and housing in good shape
1 disassembled diff (needs ring gear) with case, bearings etc
I used but good 2 speed trans
steering linkage parts
exhaust parts and couplers
I will also include misc. Traxxas T-Maxx, and Revo suspension arms, transmissions, motor mounts, etc at no cost. This is my last nitro vehicle; moving to full electric / gas.
This is an awesome package, truck needs noting, and you will have all the spares and accessories you can want for a very long time.
I am looking to get $360 or (preferably) trade for a brushless electric, or trade / cash depending on value of your trade.
Interested in hopped up / modified Traxxas Rustler vxl, E Revo, 1/16 VXL cars ( Rally, Mustang, Fiesta, Revo, Summit, slash, etc) full size summit. Associated sc8e rc8e rc10b44 rc10b4 HPI Savage sx, flux, e savage, trophy, Losi scb, electric eight or similar hobby grade rc cars, truck, buggies, tuggys, crawlers, etc. Also interested in vxl3s esc and motors, other brushless systems, large stampede bandit rustler slash parts lots and open to other entertaining RC offers.
Will also trade (or trade + cash depending) 8v carb manifold / carb / ignition, full mkIII wiring harness with computer, + all sensors (vss, knock, maf, cts, etc) 13” 4x100 wheels, etc..
Its going to be a pain to ship this thing (and expensive) but I will at the buyers expense. I am near Pittsburgh PA for a local pickup
PM me if interested.
I have a EFlite MSR X that I lost interest in, looking at another Traxxas Summit (1/10) so looking to unload this and get a few bucks to go towards a summit.
New Landing Skid
New Aluminum Blade Grips - noticed improved balance/control from this as well!!
only thing that keeps this from being in perfect shape is one of the canopy posts broke off. this doesnt affect the performance, balance, anything what-so-ever.
two lipo batters and charger
some extras (extra blade grip...wont really need anymore with aluminum upgrade, a few screws or two, standard screw driver)
picters!!! (funny accent) ((i tried to get a 'good' pic of the missing canopy post, but cam wouldnt focus good enough))
these sell for 150 new. im asking 100.
in regards to trades, only if you have a 1/10 scale summit (+cash on my end of course) and may entertain 1/16 vxl summit (+ a couple bucks on my end... im not super interested in these. just throwing it out there... in case you have one you dont drive, want to get into helis and it sweetens the deal for ya....)
I have the CM-2068 6800Kv version. Great motor, more power then I can even use!
(⦿ ⩊ ⦿) ☕︎ Coffee time!!Originally Posted by Adam Carolla
(◉ ⩊ ◉) ☕︎☕︎☕︎☕︎☕︎☕︎☕︎☕︎Lots of Coffee time!!!!!!!...
I am looking to buy a RC. I am looking for a nitro 4wd but anything works. I have been searching craigslist but I cannot find one that is cheap enough. I don't want to spend a ton of cash because I am just getting into it. Let me know what you have.
im sure its against the rules ot post an ebay link but have my Rc4wd sand rail on ebay
Looking for some 4wd Traxxas Stampede parts. Trying to build one and so far I have the baisic chassis. I need shocks, bulkheads, servos, nitro engine, linkages, and that sort of stuff.
I thought I could relaize a childhood dream and have an RC car. I bought one and than some more than I just didn't care anymore. they both need a little work I'm asking $50 plus shipping to the states. please buy it from me. Its a Losi jrx2 and a Associated t3 and parts.