Nice work Clay, the web site is looking great! I should have my car running tomorrow and hopefully a dyno sheet soon
#1
The above pictured hardware kit includes the following for $2,495USD on sale shipped to your door:
- Precision 50Trim T3/T4 turbocharger (turbo upgrades available)
- CTS 1.8T T3 turbo manifold
- CTS 3" stainless steel O2 housing w/ heat wrap
- CTS Stainless steel turbo heat shield
- CTS 3" inlet pipe Kit with AFE re-useable air filter
- CTS stainless steel braided oil feed kit
- CTS stainless steel braided oil drain kit
- Coolant line relocation Kit
- Precision 39mm wastegate
- Gaskets, Studs, Nuts, Clamps
Buy 1.8T Hardware Kit Now
What about fueling? We have that sorted for $320.00USD with the purchase of the hardware kit
- 4 x siemens 630CC injectors
- walbro 255lph inline fuel pump with install kit
Buy Siemens 630cc & Walbro Inline Kit Now
If you have any tech questions or questions regarding orders don't hesitate to PM us.
Thanks
Clay
Last edited by CTS Turbo; 05-23-2011 at 06:13 PM.
#2
Nice work Clay, the web site is looking great! I should have my car running tomorrow and hopefully a dyno sheet soon
Garrett T3/T4E 50trim, Kinetic Motorsport manifold and O2 housing, Unitronic 630cc BT file, Forge Motorsport FMIC, Tial 38mm WG, 42dd 3" DP w/ high flow cat, 3" catback , Forge 007 DV, Bilstein PSS9, 02J w/ southbend stage 3 clutch kit 14lb lwfw, Tenzo R Type m v. 1 Matte Bronze finish, IE 19mm rods, Alcantara steering wheel, AEM water/meth kit, Peloquin LSD, 3.2 front bumper
#5
man, i guess i should of bought a kit so i could get a new job![]()
![]()
#6
Quote, originally posted by cincyTT » man, i guess i should of bought a kit so i could get a new job ![]()
![]()
Nope, no TTs allowed
![]()
#8
Quote, originally posted by Clay @ CTS Turbo » Nope, no TTs allowed
![]()
say bye bye to all of your AF posts
![]()
But seriously, Clay the site looks great, been there a few times now
![]()
#9
Quote, originally posted by cincyTT » say bye bye to all of your AF posts
![]()
But seriously, Clay the site looks great, been there a few times now
![]()
Haha damn it! But seriously, thanks for leaving those up bro![]()
![]()
![]()
#12
Quote, originally posted by screwball » clay bringing back the throwback CTS name. I figured it would be better than making another name, plus my website is better now
It's got some recognition for old timers
![]()
#14
tell Shawn to make that intake manifold![]()
Take a second and thank a Veteran.
#16
Quote, originally posted by Narbie@CTSTurbo » we'll tell him you want 10 ![]()
i need one, but i bet 10 passenger side ones would sell really fast around here
![]()
Take a second and thank a Veteran.
#17
![]()
website looks good Clay
but now your a noob again
![]()
![]()
#18
Quote, originally posted by TmoeJ747 » ![]()
website looks good Clay
but now your a noob again
![]()
![]()
Thanx TJ, when are you gonna put your kit on?
#20
Quote, originally posted by slammed86golf » web site is A+. good job clay Thanks Mike
![]()
#21
Quote, originally posted by Clay @ CTS Turbo » Thanx TJ, when are you gonna put your kit on?
whenever Adam gets my ECU shipped to my house
![]()
everything else is done
#22
Quote, originally posted by TmoeJ747 » whenever Adam gets my ECU shipped to my house
![]()
everything else is done
Thanks Tim![]()
#23
It would be nice if you guys made this kit for the b5![]()
#24
Quote, originally posted by slow85golf » It would be nice if you guys made this kit for the b5 ![]()
Haha, too many of the b5'ers like the eliminators, we'll seenobody has fit one of these mani's to a B5 before, so we're not sure if it will work.
#25
Quote, originally posted by Clay @ CTS Turbo »
Haha, too many of the b5'ers like the eliminators, we'll seenobody has fit one of these mani's to a B5 before, so we're not sure if it will work.
The B6ers are the ones that love the eliminators.
#26
What software and downpipe is recommended?
#27
Quote, originally posted by 01OlFiE » What software and downpipe is recommended? This kit will bolt up to your stock downpipe, so if you have already upgraded your downpipe this will bolt up
![]()
#28
The exhuast man. looks like it would fit. The wastegate looks like it would be In a weird spot. how much for the exhaust man. by itself???
#29
Quote, originally posted by slow85golf » The exhuast man. looks like it would fit. The wastegate looks like it would be In a weird spot. how much for the exhaust man. by itself???
#30
Quote, originally posted by SLACKER 1.8T »
![]()
#33
sweet
#34
Quote, originally posted by scirocco883 » sweet
![]()
![]()
#35
it could be a god idea to make a back to back test with the stock turbo in the kit vs a 3071r or a 3076r to se the power and response diference in them