an other kit going outbut just a tad bigger
![]()
Thanks clay![]()
#36
Quote, originally posted by golfa89 » it could be a god idea to make a back to back test with the stock turbo in the kit vs a 3071r or a 3076r to se the power and response diference in them you should be our guinnea pig, the software will determine the HP output, there are lots of dynos for 3071R, 3076R, 3582R out there.
![]()
#37
an other kit going outbut just a tad bigger
![]()
Thanks clay![]()
#38
Quote, originally posted by SLACKER 1.8T » an other kit going out but just a tad bigger
![]()
Thanks clay![]()
Thanks Rich![]()
#39
GT3076R kit on the way![]()
#40
anyone have a borg warner s362 cts could use to see if it will work with their kit?man i hope it does if not it'll be a a regular or hta 35r
![]()
![]()
#41
oh noez not a regular 35r![]()
#42
Quote, originally posted by Narbie @ CTS Turbo » oh noez not a regular 35r ![]()
yeah i know but i really want that BW s362 alot spools like a 3076 and makes more power than a 35r
![]()
#43
clay are you going to see if a BW s362 in a s200 compressor cover will be able to work?or do you know if any of the holsets will work with your kit?
#44
Quote, originally posted by 50trim S » clay are you going to see if a BW s362 in a s200 compressor cover will be able to work? or do you know if any of the holsets will work with your kit?
The kit will support a T04E, and T04S compressor housing, and the TA31 style turbine housings, so if a BW turbo can fit into those packages then it will work.
![]()
#45
Quote, originally posted by Clay @ CTS Turbo »
The kit will support a T04E, and T04S compressor housing, and the TA31 style turbine housings, so if a BW turbo can fit into those packages then it will work.
![]()
same thing with the holsets?
#46
If it fit the B5 I'd buy one![]()
#47
Quote, originally posted by 50trim S » same thing with the holsets?
Same thing
Quote, originally posted by DiscoGLI » If it fit the B5 I'd buy one ![]()
![]()
![]()
#48
just wanted to post up some pics of what came in the mail![]()
the boxes
turbo 3076r
well packed
o2 housing
the mani
merge collector
tial 38mm
some fmic pipes
450hp core
and everything layed out i guess i'll be sleeping on the floor tonightthanks clay
![]()
Modified by SLACKER 1.8T at 10:26 PM 10-29-2008
#49
Now all you need to do is hook me up with a payment plan for this setup.![]()
![]()
20th build ~9:5:1 wiseco 81mm forge pisons~IE 20mm rifle drilled H beams~Calico rod bearings~snowperformance single injection water/meth~stock small port AWP head matched to a IE intake manifold~hemi throttlebody~Custom downpipe/turboback~Self maestro tuned~tial 38mm wastegate~GT3076r .63ar Vband~6 puck Clutchnet~PTE600.
#51
Everytime someone else orders one of these, my gotta-have-it quotient jumps another 10 points.... Eff.
When I was a kid, I had dyslexia. I used to write about it in my dairy.
#52
Quote, originally posted by SLACKER 1.8T »
merge collectorWow, thats a nice pronounced merge collector, no log manifolds here.
#53
So how much did all that run ya? And I just got a ko4 a few months before this kit was announced and man am I peeved. I've put probably less than 1500 miles on my kit and I'm bored of it. But I also have the AWD motor code and I think I'm limited I dont know if I'll be able to run this kit or not.![]()
#54
Quote, originally posted by Vr6Heathen » So how much did all that run ya? And I just got a ko4 a few months before this kit was announced and man am I peeved. I've put probably less than 1500 miles on my kit and I'm bored of it. But I also have the AWD motor code and I think I'm limited I dont know if I'll be able to run this kit or not. ![]()
The whole hardware kit, with GT3076R, Fuel injectors, Fuel pump, FMIC, was a bit under 4000 shipped. Its all available on the website: http://www.ctsturbo.com in the drop down menu, there are all kinds of options there
![]()
#55
Quote, originally posted by Mooz! » Everytime someone else orders one of these, my gotta-have-it quotient jumps another 10 points.... Eff. Phil, let me know when you're ready
![]()
#57
Quote, originally posted by Clay @ CTS Turbo » The whole hardware kit, with GT3076R, Fuel injectors, Fuel pump, FMIC, was a bit under 4000 shipped. Its all available on the website: http://www.ctsturbo.com in the drop down menu, there are all kinds of options there
![]()
Nice, I got a alot of savin to do then
I dont really drive the golf much so I'll probably sell the ko4 stuff and ecu. Thanks, look forward to doing business with you sometime next year.
![]()
#58
Quote, originally posted by Vr6Heathen » Nice, I got a alot of savin to do then
I dont really drive the golf much so I'll probably sell the ko4 stuff and ecu. Thanks, look forward to doing business with you sometime next year.
![]()
Thanks guys
we do have options for unitronic software (various files 630cc, 830cc etc), fuel pump, fmic, injectors, and the SEM manifold all on the website too.
#60
Quote, originally posted by vwitalianman! » wow i want a BT now then order it up already
![]()
#61
gigity getting one!!!. making up some aircraft AN lines as we speak!!!
#62
Quote, originally posted by NS_PHATGLI » gigity getting one!!!. making up some aircraft AN lines as we speak!!! Sounds good, now lets see you do the stomp!
![]()
#64
Quote, originally posted by slammed86golf » my GT30R is in.
nice using the same turbo with my setup. what software are you using?
#66
Quote, originally posted by Narbie @ CTS Turbo » looking good
when are you going to the dyno?![]()
#67
Quote, originally posted by krazygti »
nice using the same turbo with my setup. what software are you using?i am going to use uni 830 mafless software.
#68
Quote, originally posted by Clay @ CTS Turbo »
when are you going to the dyno?![]()
x2
![]()
#69
waiting on new coil packs, o2 sensor and plugs, i have misfire on all 4...
#70
could the 830 software be used with a usrt manifold?.. or would the 630 file do justice