I have this kit,install went pretty smooth but I had to gut the whole inside of rebar and most of the bottom to get this core to fit up there good. Also had to trim the gord outta the inside of bummper,I will probably end up mounting it alittle higher up. Also that could be due to using a 4motion valence instead of a gli valence. This kit performs top notch though!
2001 jetta 1.8t wolfsburg
I had a little trouble installing the kit. The tubes that connect to the sides of the core push on my bumper ALOT, now the bumper doens't fit nice and flush like it should. I'm going to give it another shot and remount it sometime this week. Might try something more like what overdrivedgn did
I want to get this intercooler, I have a MKIV GLI w/APR stage3+, clutch, coilovers, etc etc... currently i have a Eurojet SMIC, but is not enough, so i MUST upgrade but i have a concern... Your FMIC looks like a great one with great reviews, but im concern about the fitment with the APR 3+ kit, since the inlet turbo pipe goes above the turbo right behind the valve cover from passenger side to drivers side, then connects to the silicon inlet pipe and then to the MAF and to the cold air intake, in that order. So looking at your kit installed it seems like the IC pipe should go where the turbo inlet pipe is currently located... do you know of any APR stage3+ kit owner that have been able to install your FMIC? did they have to do any modifications to nay of the kits? are there any pictures of this two kits combined?
Thank you in advace for your input
We want to thank everyone that took place in our Black Friday and Cyber Monday sales. It was a great success! Now we must hunker down and work through the piles of orders.
With such large part volumes going out the door there seems to be piles of this shiny stuff all over the shop. We like shiny things.
Visit us on our website at ctsturbo.com