VWVortex


+ Reply to Thread
Page 1 of 4 1 2 3 4 LastLast
Results 1 to 35 of 132

Thread: *** Got Horsepower? ATP GT3071R, GT3076R & GT3582R Big Turbo Kits ***

  1. Banner Advertiser CTS Turbo's Avatar
    Join Date
    Oct 2nd, 2008
    Location
    Vancouver, BC
    Posts
    4,654
    Vehicles
    97 A4, 98 VRT, 01 S4, 02 996TT, 04 A4, 11 GTI, 12 Golf R, 13 ??
    10-26-2008 10:58 PM #1

    Quote, originally posted by ATP Turbo GT3071R, GT3076R, GT3082R, GT3582R Hardware Kits »


    photos courtesy of Jeff Clark



    Pricing is as follows: 2895USD Shipped

    Kit Features:

    - Garrett GT3071R DBB Turbo with Vband turbine discharge (GT3076R, GT3082R, GT3582R optional upgrades)
    - ATP 2.0FSI Cast Turbo Manifold (T3 flanged)
    - TiAL Sport 44mm Vband Wastegate
    - Vband adapter for use with 44mm TiAL external wastegate
    - 3" Stainless Steel Downpipe with recirculated wastegate discharge
    - 3" Inlet Pipe Kit w/ AFE Re-useable Air Filter
    - ATP Stainless Steel Oil Feed kit
    - ATP Stainless Steel Oil Drain Kit
    - ATP Stainless Steel Coolant Line kit
    - Gaskets, Studs, Nuts, Clamps
    - 3" Billet Aluminium MAF housing
    - 3" Turbo Inlet Kit with re-usable Air Filter


    If you have any tech questions or questions regarding orders don't hesitate to IM me.

    Click here to contact Clay with questions

    Click here to purchase the ATP GT3071R kit


    Thanks


    Clay



    Modified by CTS Turbo at 10:20 PM 8-21-2009


  2. Member theswoleguy's Avatar
    Join Date
    Jan 24th, 2006
    Location
    Atlanta, GA
    Posts
    7,651
    Vehicles
    A few...
    10-26-2008 11:02 PM #2
    sweet will tell my MKV brother
    Project GTi-R:. '04 R32 Chassis w/ 1.8t transplant in the werks
    '01 Audi TTQ Roadster: QED motor, Pag 35R vband, spec twin, enormous amount of go fast
    '03 GTI: Gutted, Parted & Transplanted
    '04 F250 6.0: 72mm turbo, 60 psi stupid fast for 8k lbs, sold to ejg3855
    '13 F150 Ecoboost: Ordered, Rec'd, Triple Black, Tow Truck for other Vehicles.

  3. 10-26-2008 11:14 PM #3
    nice setup for a mk5 !

  4. 10-27-2008 06:03 AM #4
    this kit was easier to install than a k04, ATP did a nice job on this kit

  5. Banner Advertiser CTS Turbo's Avatar
    Join Date
    Oct 2nd, 2008
    Location
    Vancouver, BC
    Posts
    4,654
    Vehicles
    97 A4, 98 VRT, 01 S4, 02 996TT, 04 A4, 11 GTI, 12 Golf R, 13 ??
    10-28-2008 10:07 AM #5
    Quote, originally posted by jc@douglas »
    this kit was easier to install than a k04, ATP did a nice job on this kit

    Thanks for the bump Jeff


  6. 10-28-2008 09:01 PM #6
    great price as well

  7. 10-28-2008 09:09 PM #7
    It's kind of scary to think what sort of numbers people with the GT3582R are going to put out since the 2.0T is almost at the 600whp mark with a GT3076R.

    Bump for a good price.

    Unitronic Stg 2+ K04
    My flickr
    Past cars:
    1991 Corrado G60 autotragic
    1998 Jetta GLX 5MT - miss it to this day

  8. Banner Advertiser CTS Turbo's Avatar
    Join Date
    Oct 2nd, 2008
    Location
    Vancouver, BC
    Posts
    4,654
    Vehicles
    97 A4, 98 VRT, 01 S4, 02 996TT, 04 A4, 11 GTI, 12 Golf R, 13 ??
    10-28-2008 09:16 PM #8
    Quote, originally posted by g60_corrado_91 »
    It's kind of scary to think what sort of numbers people with the GT3582R are going to put out since the 2.0T is almost at the 600whp mark with a GT3076R.

    Bump for a good price.


    Thanks guys, we have put the wheels are in motion to produce a FSI kit of our own for the MKV's, but it most likely won't be out till late spring/summer. We are working on exhaust manifold designs currently.


  9. 10-28-2008 09:17 PM #9
    2009 is the year of the BT for sure. These are good prices for everything you get.

  10. 10-28-2008 09:22 PM #10
    Quote, originally posted by Lou_Y2mK5 »
    2009 is the year of the BT for sure. These are good prices for everything you get.

    I know. All of these BT threads are making me envious of the owners.

    Unitronic Stg 2+ K04
    My flickr
    Past cars:
    1991 Corrado G60 autotragic
    1998 Jetta GLX 5MT - miss it to this day

  11. 10-29-2008 12:00 AM #11
    What software do you guys recommend?

  12. 10-29-2008 01:04 AM #12
    2009 maybe my year ... lol ... clay is my homie. "stg 3+++" ...

  13. Banner Advertiser CTS Turbo's Avatar
    Join Date
    Oct 2nd, 2008
    Location
    Vancouver, BC
    Posts
    4,654
    Vehicles
    97 A4, 98 VRT, 01 S4, 02 996TT, 04 A4, 11 GTI, 12 Golf R, 13 ??
    10-29-2008 10:48 AM #13
    Quote, originally posted by whizbang18T »
    2009 maybe my year ... lol ... clay is my homie. "stg 3+++" ...

    Thanks Lu


  14. 10-29-2008 11:11 AM #14
    Quote, originally posted by babutler »
    What software do you guys recommend?

    The only one publicly available at more dealers nationwide...UNITRONIC



    Modified by Lou_Y2mK5 at 8:12 AM 10-29-2008


  15. 10-29-2008 11:37 AM #15
    Quote, originally posted by Lou_Y2mK5 »

    The only one publicly available at more dealers nationwide...UNITRONIC

    Modified by Lou_Y2mK5 at 8:12 AM 10-29-2008

    Or Revo


  16. 10-29-2008 11:51 AM #16
    Quote, originally posted by MKC7 »

    Or Revo

    Not yet to the public


  17. 10-30-2008 03:15 AM #17
    Just a couple questions:
    Can I use my Evoms intake with it and how?
    What are my options with the Diverter Valve?
    Will it work with an aftermarket Front Mount Intercooler like Eurojet's and VF Engineering?

  18. Banner Advertiser CTS Turbo's Avatar
    Join Date
    Oct 2nd, 2008
    Location
    Vancouver, BC
    Posts
    4,654
    Vehicles
    97 A4, 98 VRT, 01 S4, 02 996TT, 04 A4, 11 GTI, 12 Golf R, 13 ??
    10-30-2008 10:35 AM #18
    Quote, originally posted by babutler »
    Just a couple questions:
    Can I use my Evoms intake with it and how?
    What are my options with the Diverter Valve?
    Will it work with an aftermarket Front Mount Intercooler like Eurojet's and VF Engineering?

    Lou_Y2mK5 is using a Neuspeed 2.75" Intake kit I'm not familiar with the Evoms. Jeff Clark JC@douglas is using an EJ FMIC kit and DV relocation I believe.


  19. Member Rub-ISH's Avatar
    Join Date
    Aug 8th, 2006
    Location
    VEGAS
    Posts
    2,874
    Vehicles
    06(AUDI)A3
    10-31-2008 03:13 AM #19
    You could not pay me to put that cast ATP manifold on my car... I went through 2 of them on my 1.8t and they are absolute crap. Any higher EGTs and it will be hair line crack city
    Quote Originally Posted by Hunter S Thompson
    I hate to advocate drugs, alcohol, violence, or insanity to anyone, but they've always worked for me.
    My IMDb resume...Sounds I've recorded

  20. 10-31-2008 03:33 AM #20
    really? my buddies that ran the atp mani on their 1.8ts & didn't have problems ... i didn't have to worry w/ my then setup (upgraded/tweaked apr stage 3)

  21. Banner Advertiser CTS Turbo's Avatar
    Join Date
    Oct 2nd, 2008
    Location
    Vancouver, BC
    Posts
    4,654
    Vehicles
    97 A4, 98 VRT, 01 S4, 02 996TT, 04 A4, 11 GTI, 12 Golf R, 13 ??
    10-31-2008 10:14 AM #21
    Quote, originally posted by Rub-ISH »
    You could not pay me to put that cast ATP manifold on my car... I went through 2 of them on my 1.8t and they are absolute crap. Any higher EGTs and it will be hair line crack city

    The 1.8T manis were not very good.


    Quote, originally posted by whizbang18T »
    really? my buddies that ran the atp mani on their 1.8ts & didn't have problems ... i didn't have to worry w/ my then setup (upgraded/tweaked apr stage 3)

    Your buddies were special lu haha.


  22. 11-02-2008 08:27 PM #22
    RE: GT3071r

    Boost starts around 2300-2500, 15-16psi by 3500 and full by 4000k.

    In case anyone was still hung up on the "lag" worries. What lag? No time to think about lag. lol


  23. 11-02-2008 11:03 PM #23
    Quote, originally posted by Lou_Y2mK5 »
    RE: GT3071r

    Boost starts around 2300-2500, 15-16psi by 3500 and full by 4000k.

    In case anyone was still hung up on the "lag" worries. What lag? No time to think about lag. lol

    Lot less laggy than my friend's T3/T4 1.8T, which I think is a slightly smaller turbo too.

    Unitronic Stg 2+ K04
    My flickr
    Past cars:
    1991 Corrado G60 autotragic
    1998 Jetta GLX 5MT - miss it to this day

  24. Banner Advertiser CTS Turbo's Avatar
    Join Date
    Oct 2nd, 2008
    Location
    Vancouver, BC
    Posts
    4,654
    Vehicles
    97 A4, 98 VRT, 01 S4, 02 996TT, 04 A4, 11 GTI, 12 Golf R, 13 ??
    11-03-2008 09:44 AM #24
    Quote, originally posted by g60_corrado_91 »

    Lot less laggy than my friend's T3/T4 1.8T, which I think is a slightly smaller turbo too.

    Well bigger engine, higher CR, tends to result in faster spool, and a 3071R will have great boost recovery after shifting.


  25. Member
    Join Date
    Dec 19th, 2007
    Location
    Mount Airy MD
    Posts
    229
    Vehicles
    mk3 gti 2.0l, mk3 golf, MK5 GTI
    11-03-2008 04:46 PM #25
    Well it looks like I need to step it up from knocking over 7elevens to cracking some Vaults. I know what I want for Christmas....... Now only if I could move this rock..... haha

  26. Banner Advertiser CTS Turbo's Avatar
    Join Date
    Oct 2nd, 2008
    Location
    Vancouver, BC
    Posts
    4,654
    Vehicles
    97 A4, 98 VRT, 01 S4, 02 996TT, 04 A4, 11 GTI, 12 Golf R, 13 ??
    11-04-2008 01:38 AM #26
    Quote, originally posted by s0eur0 »
    Well it looks like I need to step it up from knocking over 7elevens to cracking some Vaults. I know what I want for Christmas....... Now only if I could move this rock..... haha


    Haha, don't forget the parking meters!


  27. 11-04-2008 06:59 PM #27
    Quote, originally posted by Clay @ CTS Turbo »

    Well bigger engine, higher CR, tends to result in faster spool, and a 3071R will have great boost recovery after shifting.

    Can't wait until I do this down the road.

    Unitronic Stg 2+ K04
    My flickr
    Past cars:
    1991 Corrado G60 autotragic
    1998 Jetta GLX 5MT - miss it to this day

  28. 11-04-2008 08:32 PM #28
    Quote, originally posted by g60_corrado_91 »

    Can't wait until I do this down the road.

    Have to post this for some humor tease action. .

    "Light Speed Too Slow"

    GT30 = Ludicrous Speed!

    http://www.youtube.com/watch?v=HB7tc9pVvYg


  29. 11-04-2008 08:35 PM #29
    Quote, originally posted by Lou_Y2mK5 »

    Have to post this for some humor tease action. .

    "Light Speed Too Slow"

    GT30 = Ludicrous Speed!

    http://www.youtube.com/watch?v=HB7tc9pVvYg

    You're killing me. lol Too bad I don't get sound at my school.

    Unitronic Stg 2+ K04
    My flickr
    Past cars:
    1991 Corrado G60 autotragic
    1998 Jetta GLX 5MT - miss it to this day

  30. 11-04-2008 08:38 PM #30

    It will be worth the wait friend. Do it!


  31. 11-04-2008 08:57 PM #31
    Quote, originally posted by Lou_Y2mK5 »

    It will be worth the wait friend. Do it!

    I take paypal.

    Unitronic Stg 2+ K04
    My flickr
    Past cars:
    1991 Corrado G60 autotragic
    1998 Jetta GLX 5MT - miss it to this day

  32. 11-04-2008 11:40 PM #32
    Haha, just had the chance to watch that video. Good stuff.
    Unitronic Stg 2+ K04
    My flickr
    Past cars:
    1991 Corrado G60 autotragic
    1998 Jetta GLX 5MT - miss it to this day

  33. 11-17-2008 08:32 PM #33
    hahhahha
    Ludicrous speed, GO! but we need brakes to!!!

    i`m just afreid about my transmission.....


  34. 11-20-2008 10:47 AM #34
    can we pack 42R wheels into a 35R T3 frame for me with a 1.06 exhaust


    Modified by jc@douglas at 7:49 AM 11-20-2008

  35. Banner Advertiser CTS Turbo's Avatar
    Join Date
    Oct 2nd, 2008
    Location
    Vancouver, BC
    Posts
    4,654
    Vehicles
    97 A4, 98 VRT, 01 S4, 02 996TT, 04 A4, 11 GTI, 12 Golf R, 13 ??
    11-20-2008 10:51 AM #35
    Quote, originally posted by jc@douglas »
    can we pack 42R wheels into a 35R T3 frame for me with a 1.06 exhaust

    Anything for you Jeff


+ Reply to Thread
Page 1 of 4 1 2 3 4 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts