02M Steel Billet Flywheels, Sachs & Clutchnet Clutch Kits -Free Ground Lower 48

[.:R32_Honda_Slayer]

Hey, I was wondering if you had a sachs high performance clutch kit with the 16.5 pound flywheel for an 04 r32 available. any info would be much appreciated, thanks

[FourSeasonTuning.com]

DXD/Southbend offer two kits for the 02M using the Sachs Sport Pressure plates.

These are made for 2.8 24V VR6 and 1.8T with 02M. So for the R32 you can use the 2.8 24V flywheel here ( has a smaller step height but these kits are made for that).

I can provide the links for the kits after they are listed.

02M FST STEEL BILLET L/W Flywheel $374.95 Shipped Ground

Stage III Daily has a organic sprung hub disc and is rated at 470 TQ at FW $900 without a flywheel

Stage III Daily has a Kevlar sprung hub disc and is rated at 485 TQ at FW $950
without a flywheel

[coatofarms]

Me thinks my throw out bearing is making some noise, probably going to be getting a call from me shortly!

[Xacto]

02M Sachs Clutch Kit $289.95 Shipped Ground

Can you still honor this price? The link takes you to the kit @ $339.95.

Thanks!

[FourSeasonTuning.com]

IM Sent, prices fixed on page one. Thanks for the order.

[hunbrovw]

James thanks for the help and shipping, also for changing the shipping address a half dozen times. chomping at the bit to get this kit and get back on the road. want some bearings for gearbox? thanks again.

[FourSeasonTuning.com]

Your welcome.

[Ld7w_VR]

May be contacting you guys soon. Felt my stock clutch start slipping this past weekend at h2oi.

[vrtme]

Hello. i would like this kit

$749.95 Stage 1+ CLUTCH KIT with 16.5lb flywheel FST Single mass Steel Billet 16.5 pound 240MM flywheel, 240MM Sachs Pressure Plate,Clutchnet Sprung Hub Full face Organic Disc,10 flywheel & 6 pressure plate bolts, OE release bearing


How much would this cost to ship to the UK?

Im hearing lots of people talking about noises.. should i be worred about this?

Cheers

[TysGTi]

I ordered the stg 1+ that included std shipping on a Wednesday at 4:45pm est and for 20 dollars more James had it here on Friday at about noon from California. Everything bolted up with no issues, clutch disk came marked with correct orientation. Ive got just under a 1000 miles on the new setup, couldn't be happier.

[FourSeasonTuning.com]

Steel Billet Flywheel Sale $60 off 240MM and $40.00 Off 228MM. Includes free ground in the lower 48. Phone orders only. offer Valid until 3:00 PST

714 997 5842

[rajvosa71000]

What's up, I have a 24V with a VF stage 2 SC and was looking to get a new clutch kit..i currently have a TCS TC 200 clutch set up with 9lbs Findanza LWFW, clutch feels good but it makes shifting harder, sometimes you have to fight it a little to shift, it's been like that since I put the clutch in, about 3 years ago.
Anyway, I was thinking to get me a stock R32 clutch with stock R32 flywheel, but I remembered this post and looked it up
Anyway, what kit would you recommend for me, with my set up im putting down around 300hp and around 250tq...and I would love to try that steel flywheel instead of my 9lbs aluminum one...nothing wrong with the 9 pounder but it just chatters a little and sometimes gives me rev hangs, nothing to serious.

[FourSeasonTuning.com]

If you want to keep your flywheel, then here is a kit. Sprung hub full face organic disc,Modified Sachs pressure plate. $549.99
http://fourseasontuning.com/?product=556


Stage 2 Kit same as above with Steel Billet flywheel. $899.95
http://fourseasontuning.com/?product=598

[D03GLIR]

I bought the Stg II or III (don't recall and not taking the time to look it up) Clutchnet setup w/ billet steel fly wheel and despite what is said, it chatters a lot. It's really embarrassing sitting at a light, waiting in a parking lot or even getting gas. Everyone asks- "Dude, What's wrong w/ your car?"
The clutch itself is great, good feel, nice even engagement, gods grip if you drop the clutch and I don't worry so much about wearing it out but the chatter is just god awful.
They did tell me I could get it balanced locally, pre install but I figured that a low production billet piece should have been pretty balanced to begin with. Honestly, I don't think it would have mattered if I had it balanced. I think it's an issue w/ the 24V/ O2M trans gears and how they respond to anything but a dual mass FW. So not necessarily a 4 Seasons problem or issue but really the nature of the O2M. I do feel they should be more honest about it though which is why I'm posting.
So, I'd advise finding someone who has one first and listen to it w/ it in neutral and w/ the clutch out.
I like the faster spool up and can feel that but it doesn't outweigh the annoyance of the clatter for me. It's one thing I wish I hadn't done to my car but it's too expensive to undo.

Peace

[rajvosa71000]

thanks for the post...yeah my 9lbs LWFW chatters too, and sometimes I keep my clutch pressed to avoid the sound of it, it really feels like something is wrong with your car lol.
It was funny to me when my car was at the dealer and they told me that something sounds wrong with my transmission lol, I told them it was my LWFW.
Anyway, I'd really like to get a good clutch with a stock lwfw, but was thinking maybe 16lbs would be little quiter than 9lbs.

[FourSeasonTuning.com]

This quoted section below is from page 1 of this thread. I am not trying to hide the fact that a single mass 02M flywheel makes a clatter or rattle noise. I suggested having your pressure plate checked for balance as well. Even the heavier 20 pound ones make noise.

Our 02M flywheels are zero balanced (this is an extra cost that many mfg's skip).

The noise is from going from a dual mass to single mass flywheel. A different pedal height is from improper bleeding. This kit uses the OEM pressure plate, OEM release bearing and same step height as the OEM flywheel. Some user's have bumped the idle 150-200 rpm and it seemed to help a little. Noise varies from car to car.

We spoke today and the car does not have a engagement issue.

[rajvosa71000]

My main concern about this clutch is shifting, is it smooth? I dont really care too much about the chatter, im already used to my 9lbs FW.
Im wondering if this clutch shifts smooth, can anyone tell me from their experience...thanks.
Merry Christmas to everyone

[DerSpiegel]

This quoted section below is from page 1 of this thread. I am not trying to hide the fact that a single mass 02M flywheel makes a clatter or rattle noise. I suggested having your pressure plate checked for balance as well. Even the heavier 20 pound ones make noise.

Pressure plate balancing is a technique also used in Porsche circles when going from a dual-mass to a lightweight single-mass flywheel. I can't remember what the exact procedure is to balance a pressure plate though, is it done in conjunction with the lightweight flywheel or by itself?

[FourSeasonTuning.com]

Pressure plate balancing is a technique also used in Porsche circles when going from a dual-mass to a lightweight single-mass flywheel. I can't remember what the exact procedure is to balance a pressure plate though, is it done in conjunction with the lightweight flywheel or by itself?

The whole assembly is balanced together. And then installed in the same originating order it was balanced.

[DerSpiegel]

The whole assembly is balanced together. And then installed in the same originating order it was balanced.

Cool. Thanks...

[shysty]

www.FourSeasonTuning.com

[fookerbob]

[Kid_Dub]

Ordered a flywheel from these guys last night and a clutch kit elsewhere. James called me this morning to make sure that I had everything I needed and was ordering the right stuff. In talking to him we figured out I'm saving money and upping performance getting the Stage 1+ clutch kit l/w flywheel from here. Great service.
Will update after everything's installed

[FourSeasonTuning.com]

Thank you.

[focusfuri75]

Just wanted to send a big Thank You to James and Rigo at FourSeasonTuning.
I finally had my FST steel billet lightweight flywheel and stage 2 clutch installed, and all I can say is.....WOW!!!

It's like driving a whole other car.
Revs a lot easier and pulls a lot smoother.
There's slight chatter at idle, but that's something I knew about before getting this flywheel, and the added noise is very tolerable and not annoying at all.

Thanx again,


Laz

[FourSeasonTuning.com]

Your welcome.

[fookerbob]

[shysty]

[337zx]

If any of you all need a clutch/flywheel setup, dont hesitate to give James a call. He's a great person to deal, knows his stuff, and the prices are great! Thanks again bud.

Regards,
Jim

[fookerbob]

[R36Dreams]

Just wanted to send a big Thank You to James and Rigo at FourSeasonTuning.
I finally had my FST steel billet lightweight flywheel and stage 2 clutch installed, and all I can say is.....WOW!!!

It's like driving a whole other car.
Revs a lot easier and pulls a lot smoother.
There's slight chatter at idle, but that's something I knew about before getting this flywheel, and the added noise is very tolerable and not annoying at all.

Thanx again,


Laz

How much chatter is "slight". Got the Stage 1+ in this week and it seems a little loud to me.

[shysty]

bump

[give_it_to_dem]

Very fast shipping

I ordered an OEM clutch kit with a LWFW, dropping the car off today to get it installed, cant wait!!

[R36Dreams]

Since nobody posted how much chatter is "slight chatter".....here's mine. Very tempted to go back to stock. It's embarrassing in traffic

[Bullit1962]

Since nobody posted how much chatter is "slight chatter".....here's mine. Very tempted to go back to stock. It's embarrassing in traffic

Hole hell! Did you have a new clutch installed or an old TDi motor!!! I'd be PISSED if my car sounded like that after a clutch install...