Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Page 2 of 6 FirstFirst 123456 LastLast
    Results 26 to 50 of 144

    Thread: 02M Steel Billet Flywheels, Sachs & Clutchnet Clutch Kits -Free Ground Lower 48

    1. Member 24vEngineer's Avatar
      Join Date
      Nov 27th, 2007
      Location
      SLOW Cal
      Posts
      1,541
      Vehicles
      2004 Audi S4, 08 Wolfy
      02-16-2009 03:14 PM #26
      Just put the stage 1 kit w/ 16.5 lb flywheel. HUGE DIFFERENCE! Throtle responce and acceleration are definitely improved.
      Highly recomended! [IMG]http://**********************/smile/emthup.gif[/IMG] [IMG]http://**********************/smile/emthup.gif[/IMG]

    2. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      2,071
      Vehicles
      92 Corrado SLC , 92 Audi S4
      02-17-2009 11:41 PM #27
      Thanks for the feedback.
      Two more kits added.
      $995 Clutchnet Stage 2X Kevlar CLUTCH KIT W/16.5lb flywheel FST Single mass Steel Billet 16.5 pound 240MM flywheel, 240MM CLUTCHNET 2,200lb modified Pressure Plate,Clutchnet Kevlar Steel covered Sprung hub Disc,flywheel & pressure plate bolts, OE release bearing.

      CLUTCHNET STAGE 2X Kevlar KIT
      $995 Clutchnet Stage 2X Fiber Carbon CLUTCH KIT W/16.5lb flywheel FST Single mass Steel Billet 16.5 pound 240MM flywheel, 240MM CLUTCHNET 2,200lb modified Pressure Plate,Clutchnet Fiber Carbon Steel covered Sprung hub Disc,flywheel & pressure plate bolts, OE release bearing.

      CLUTCHNET STAGE 2X Fiber Carbon KIT
      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    3. Member
      Join Date
      Apr 23rd, 2006
      Posts
      732
      Vehicles
      '11 STi, '07 A3 3.2Q
      02-19-2009 11:28 AM #28
      PM'd
      daddy needs help putting 20psi to the asphalt... [IMG]http://**********************/smile/emthup.gif[/IMG]

    4. Member One Gray GLI's Avatar
      Join Date
      Apr 2nd, 2007
      Location
      Long Island, NY
      Posts
      11,880
      Vehicles
      03' GLI 24vT, 11' 328xi
      03-03-2009 08:17 PM #29
      Quote, originally posted by dubdoor »
      PM'd
      daddy needs help putting 20psi to the asphalt... [IMG]http://**********************/smile/emthup.gif[/IMG]

      x2. stock clutch doesnt love me anymore. lol
      The internet is serious business.

    5. Member
      Join Date
      Apr 23rd, 2006
      Posts
      732
      Vehicles
      '11 STi, '07 A3 3.2Q
      03-03-2009 10:19 PM #30
      ...James is the man with the goods...

    6. Member One Gray GLI's Avatar
      Join Date
      Apr 2nd, 2007
      Location
      Long Island, NY
      Posts
      11,880
      Vehicles
      03' GLI 24vT, 11' 328xi
      03-03-2009 10:22 PM #31
      Quote, originally posted by dubdoor »
      ...James is the man with the goods...

      what are you going with, dubdoor?
      The internet is serious business.

    7. Member
      Join Date
      Apr 23rd, 2006
      Posts
      732
      Vehicles
      '11 STi, '07 A3 3.2Q
      03-03-2009 11:04 PM #32
      i actually talked to James earlier today... [IMG]http://**********************/smile/emthup.gif[/IMG]
      when i pull the trigger it will be a double sided carbon-fibre full face 8 segmented disc and the CN 2200lb 2x PP (450+ft/lbs)...carbon based discs require NO break-in...so we'll go straight off the lift on to the dpacks...maybe a 16.5lb FW...i have a 9lb unit, but i'm not too keen on running it...
      how much boost are you running...C2 kit right...?

    8. Member One Gray GLI's Avatar
      Join Date
      Apr 2nd, 2007
      Location
      Long Island, NY
      Posts
      11,880
      Vehicles
      03' GLI 24vT, 11' 328xi
      03-03-2009 11:20 PM #33
      nah. eip stg 2 kit. on like 11psi now cause 14 doesnt agree with my clutch haha.
      I probably need something around like 400ft/lbs if I ever do get an intake manifold..and I'm definitely gonna get a steel lwfw because our cars revhang enough and I hate clutch chatter..
      but also don't carbon based discs wear out quicker? or am I thinking carbon-kevlar sort of deals? My friend in his evo 8 had a exedy twin disk carbon/kevlar whatever, and it wore out quick. :x
      The internet is serious business.

    9. 03-23-2009 11:51 PM #34
      James,
      I have a 2.3l V5 golf IV (AQN) 5spd. 2001 car.
      Can you help with a clutch kit with flywheel. Clutch is a 240mm.
      Car has mild mods, intake, exhaust, and 100hp dry NOS kit.
      Clutch is slipping now, never would have guessed!
      Having trouble sourcing a kit for this type of golf.
      thanks,
      Martin

    10. Member mattevandavis's Avatar
      Join Date
      Jun 15th, 2006
      Location
      McDonough, GA
      Posts
      613
      Vehicles
      2003 VW GTI Stroked 2.0T GT2871R, with Meth Injection
      04-01-2009 07:32 PM #35
      PROPS to FourSeasons. Done lots of business with them. Quality stuff Great prices. James Is the man!

    11. Member mattevandavis's Avatar
      Join Date
      Jun 15th, 2006
      Location
      McDonough, GA
      Posts
      613
      Vehicles
      2003 VW GTI Stroked 2.0T GT2871R, with Meth Injection
      04-09-2009 10:55 PM #36
      Ordered my Clutchnet clutch today. Got the stage 3, copper/copper cluctch, AL fly, and pel diff! Best price i could find on the net!!
      Cant wait to get the 02M installed with my new toys!

    12. Member
      Join Date
      Apr 23rd, 2006
      Posts
      732
      Vehicles
      '11 STi, '07 A3 3.2Q
      04-10-2009 09:54 PM #37
      ^ same 'cept with the steel FW...
      bump for one of the good guys...!!!

    13. Member
      Join Date
      Apr 23rd, 2006
      Posts
      732
      Vehicles
      '11 STi, '07 A3 3.2Q
      04-19-2009 01:54 PM #38
      so far so good...100 miles on break-in
      a few notes thus far...
      -clutch engagement is considerably lower in pedal travel than stock...
      -pedal travel is stiffer than stock: ~30-50% as stated by manufacturer...
      -segmented copper feramic is grabby but still offers some modulation (not on/off)...
      -this disc chatters at low rpm/low speed...
      -16.5lbs clatters mildly, haven't put my foot into it, but one thing i sure noticed is revmatching on downshifts is effortless...
      some of these attribute will likely change for the better with time...
      more to come...
      edit: LSD is amazing...get one NOW...!


      Modified by dubdoor at 10:55 AM 4-19-2009

    14. Member .SLEEPYDUB.'s Avatar
      Join Date
      Jul 28th, 2005
      Location
      Shreveport, Louisiana
      Posts
      6,021
      Vehicles
      2003 GLI, 2005 GLI, 2JZ Swapped E30, FC RX7
      04-20-2009 05:22 PM #39
      so which one of these will hold 700whp?
      The Elite 24v VR6 Club: Founder
      Want to be a horsepower baller? Buy my car
      http://forums.vwvortex.com/showthrea...whp-street-car

    15. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      2,071
      Vehicles
      92 Corrado SLC , 92 Audi S4
      04-20-2009 07:37 PM #40
      None of the single disc ones listed are made for 700HP. Contact if you want a price on the multi disc setup.
      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    16. Member Bdfrd 24v's Avatar
      Join Date
      Nov 23rd, 2004
      Posts
      1,466
      Vehicles
      2003 24vT, 2010 TDI, Jeep Overland Summit
      06-09-2009 04:37 PM #41
      Just placed my order today.
      Stage 3+ kit w/ steel flywheel
      02M Peloquin

      I'm anxious to see how much better I get the power to the ground. Looking for an install toward the end of the month/ begining of July.

      James was very informative and quite quick with his research for me. Seems like a real top notch guy to work with [IMG]http://**********************/smile/emthup.gif[/IMG]
      2003 24vT - 2.9L JE, Eagle, C2 Motorsports, APTuning, Precision Turbo, Jeff Atwood, Fully Polished Aluminum and Stainless components, Peloquin Diff, Clutchnet state 3+ clutch, 11lb Flywheel, 3.5" DP, Custom 3" magnaflow,Weitec, OZ Canyon II 19x8 & 19x9.5, 17x9 w/ Hoosiers for track, Greddy Profec BII, Memphis 4-10" M Class, Memphis Components, Memphis Belle 1000 5 Channel, Pioneer w/ Nav, Updated Dyno results to come.

    17. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      2,071
      Vehicles
      92 Corrado SLC , 92 Audi S4
      06-13-2009 02:34 PM #42
      Thanks for the order.
      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    18. Member Bdfrd 24v's Avatar
      Join Date
      Nov 23rd, 2004
      Posts
      1,466
      Vehicles
      2003 24vT, 2010 TDI, Jeep Overland Summit
      06-15-2009 03:01 PM #43
      Got the clutch and Flywheel today. Looks real nice.
      Thanks again
      2003 24vT - 2.9L JE, Eagle, C2 Motorsports, APTuning, Precision Turbo, Jeff Atwood, Fully Polished Aluminum and Stainless components, Peloquin Diff, Clutchnet state 3+ clutch, 11lb Flywheel, 3.5" DP, Custom 3" magnaflow,Weitec, OZ Canyon II 19x8 & 19x9.5, 17x9 w/ Hoosiers for track, Greddy Profec BII, Memphis 4-10" M Class, Memphis Components, Memphis Belle 1000 5 Channel, Pioneer w/ Nav, Updated Dyno results to come.

    19. 07-14-2009 10:20 AM #44
      Do all the kits come with alignment tools?

    20. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      2,071
      Vehicles
      92 Corrado SLC , 92 Audi S4
      07-14-2009 11:41 AM #45
      Yes, when purchased with a flywheel.
      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    21. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      2,071
      Vehicles
      92 Corrado SLC , 92 Audi S4
      07-19-2009 02:00 PM #46
      Stock Dual Mass Flywheel Added.
      $489.95 OEM Dual Mass Flywheel Dual Mass Flywheel. 27 pounds with starter ring gear.

      02M Dual Mass Flywheel $489.95 Shipped Ground
      $289.95 Sachs 02M Clutch Kit Includes Pressure Plate, Disc and Release bearing.

      02M Sachs Clutch Kit $359.95 Shipped Ground


      Modified by FourSeasonTuning.com at 11:05 AM 7-19-2009
      Last edited by FourSeasonTuning.com; 06-14-2012 at 07:33 PM.
      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    22. Banned 29er's Avatar
      Join Date
      Feb 25th, 2007
      Location
      Not Fancy
      Posts
      16,639
      Vehicles
      '12 JKU Rubicon
      09-14-2009 07:16 PM #47
      Been running the billet steel flywheel with a stock clutch for about 2k miles of daily driving, highly recommended [IMG]http://**********************/smile/emthup.gif[/IMG]

    23. 09-22-2009 05:45 AM #48
      ive orderd mine too from james ,, very helpful guy , ill also be runing stock clutch on my turboed engine , any ideas on how mutch boost i can run on stock , tryed it on 8psi and holds fine and that was with a dual mass fitted ,
      mk1 golf, mk5 r32c holset hx40 turbo 6 speed tdi gearbox,02m haldex 4wd , electric steering ,

    24. Forum Sponsor FourSeasonTuning.com's Avatar
      Join Date
      Jan 12th, 2005
      Location
      Shipping WorldWide
      Posts
      2,071
      Vehicles
      92 Corrado SLC , 92 Audi S4
      09-27-2009 10:47 PM #49
      Thanks for the order. Stock clutches have done better than the DM flywheel.
      :: www.FourSeasonTuning.com
      :: Wössner-APR-United Motorsport-Supertech-Clutchnet-DXD/SBC-Koni-KW- IE-Bosch-Hawk-Peloquin-TT-Sachs-Brembo-Samco-Much More...
      :: VW / Audi Performance and Oem Parts Source and Service Center ::714-997-5842 M-F 10:30-6:30 PST

    25. 10-21-2009 10:16 PM #50
      I recently purchased the stage 1+ w/16.5 lb flywheel. James was very helpful. However I do have a few questions for any of you guys who have this setup...I really just want to make sure it was installed correctly. 1. My pedal seems to engage much higher than my stock before the slave went bad? 2. The clutch noise isn't what I'd call faint, more of a loud chatter. Is this normal? Or should I take it back to the mechanic?

    Page 2 of 6 FirstFirst 123456 LastLast

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •