Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Results 1 to 29 of 29

    Thread: DTA P8 Pro engine management

    1. 12-01-2008 11:44 PM #1
      http://share.shutterfly.com/ac...ZN2M7

      DTA P8 Pro engine management

      I have a complete built turbo VR6 corrado , everything is available from the engine management to the full turbo motor, awic setup complete with heat exchanger, Quaife syncromesh 6 speed with the quaife LSD. Please feel free to call IM or email with any questions and price offers.
      s1wltd@gmail.com
      267 - 278 - 2738


      Modified by S1W at 9:16 PM 1-25-2009


    2. 12-02-2008 10:03 AM #2
      T T T

    3. 12-02-2008 01:15 PM #3
      DTA P8 Pro engine management

      I have a complete built turbo VR6 corrado , everything is available from the engine management to the full turbo motor, awic setup complete with heat exchanger, Quaife syncromesh 6 speed with the quaife LSD. Please feel free to call IM or email with any questions and price offers.
      s1wltd@gmail.com
      267 - 278 - 2738


    4. 12-02-2008 07:35 PM #4

    5. 12-06-2008 01:49 PM #5
      I will post up some pics as well for this setup tonight for your viewing pleasure....

    6. 12-13-2008 05:49 PM #6

    7. 01-02-2009 10:45 AM #7
      T T T 2009

    8. 01-08-2009 11:25 AM #8
      DTA P8 Pro engine management
      I have a complete built turbo VR6 corrado , everything is available from the engine management to the full turbo motor, awic setup complete with heat exchanger, Quaife syncromesh 6 speed with the quaife LSD. Please feel free to call IM or email with any questions and price offers.
      s1wltd@gmail.com
      267 - 278 - 2738

    9. 01-22-2009 10:43 AM #9
      T T T

    10. 01-22-2009 05:08 PM #10
      post prices would help a little

    11. 01-25-2009 03:14 PM #11
      yeas I will be online here later tonight posting pics and prices//////

    12. 01-26-2009 11:19 PM #12

    13. 01-27-2009 09:20 AM #13

    14. 02-04-2009 11:15 AM #14
      did you see the pics.... ( of the car ...) ( you know what the DTA looks like , dont you )

    15. 02-09-2009 10:53 AM #15
      T T T

    16. 02-23-2009 01:04 PM #16

    17. 03-01-2009 05:01 PM #17
      I am sending additional pics to those that recently contacted me

    18. 03-18-2009 04:20 PM #18
      TTT spring bump

    19. 03-23-2009 10:34 AM #19
      spring bump ..... lets make a deal !

    20. 03-25-2009 11:23 AM #20
      Hi, my son is attempting the same project, did or do you have any issues with the engine management system? how much would you want for the P8 and loom?

    21. 03-25-2009 08:35 PM #21
      I will be happy to help and also give you the best price I can ... please feel welcome to give me a call....
      267 - 278 - 2738

    22. 03-30-2009 01:45 PM #22
      T T T

    23. 03-31-2009 10:35 AM #23

    24. 04-09-2009 09:40 PM #24
      Here you go my friends.......

    25. 04-25-2009 09:36 PM #25
      Id like to buy the standalone, if it hasn't been sold yet.Let me kno 201-951-3976 Daniel

    26. 04-26-2009 10:43 PM #26
      DTA Fast P8 Pro ECU

      FEATURES
      -8 individually controllable coil drivers
      -8 injector drivers, individual adjustments
      -Amplified Coils Support
      -Full 3 or 4 wheel traction control
      -Launch control with numerous options.
      -Turn off closed loop above TPS & RPM
      -Full turbo anti lag facilities
      -Logging switch able on dash NEW
      -Voltage in warning limits during Mapping
      -Manifold Pressure as main load
      -Improved idle speed control
      -9 auxiliary outputs for various functions
      -Improved flexible data logging capabilities
      -Compensation for air/water temp/MAP
      -Closed loop Lambda control
      -Turbo pressure control variable by RPM
      -Steering wheel controlled start RPM limit
      -Temp dependant idle speed control


      GENERAL
      -Billet machined enclosure.
      -32Mhz Processor.
      -55pin, sealed, reliable, connector system.
      -Free upgrades for one year.
      -Two year warranty.

      -Full power shift cut
      -Dedicated shift light output.
      -Serial output of data for dashboard
      -Dedicated Tacho output.
      -Two stage main RPM limiter.
      -Dedicated fuel pump control.
      -Full start-up fuelling map.
      -Throttle transient enrichment map.
      -Self test facilities for ignition & injection.
      -Diagnostics and peak recording.
      -Real time mapping, no EPROM's required.
      -Selectable 20 X 14 lambda target map
      -In-vehicle fuel map building
      -Can use 5 volt linear lambda sensor
      -Programmable for most crank wheels
      -Max. RPM 16,000.
      -Main 3D maps(20 x 14) have programmable break points.


      PWM OUTPUTS FOR THE FOLLOWING:
      -Water injection (multistage)
      -Speed related power reduction
      -NOS control ignition retard (multistage)
      -Fuel Mix control for endurance racing
      -Twin Fuel pump control
      -Anything else requiring mixture and ignition control linked to an input and an output.


    27. 05-02-2009 10:24 AM #27
      T T T

    28. 05-08-2009 11:10 AM #28
      DTA Fast P8 Pro ECU
      FEATURES
      -8 individually controllable coil drivers
      -8 injector drivers, individual adjustments
      -Amplified Coils Support
      -Full 3 or 4 wheel traction control
      -Launch control with numerous options.
      -Turn off closed loop above TPS & RPM
      -Full turbo anti lag facilities
      -Logging switch able on dash NEW
      -Voltage in warning limits during Mapping
      -Manifold Pressure as main load
      -Improved idle speed control
      -9 auxiliary outputs for various functions
      -Improved flexible data logging capabilities
      -Compensation for air/water temp/MAP
      -Closed loop Lambda control
      -Turbo pressure control variable by RPM
      -Steering wheel controlled start RPM limit
      -Temp dependant idle speed control


      GENERAL
      -Billet machined enclosure.
      -32Mhz Processor.
      -55pin, sealed, reliable, connector system.
      -Free upgrades for one year.
      -Two year warranty.

      -Full power shift cut
      -Dedicated shift light output.
      -Serial output of data for dashboard
      -Dedicated Tacho output.
      -Two stage main RPM limiter.
      -Dedicated fuel pump control.
      -Full start-up fuelling map.
      -Throttle transient enrichment map.
      -Self test facilities for ignition & injection.
      -Diagnostics and peak recording.
      -Real time mapping, no EPROM's required.
      -Selectable 20 X 14 lambda target map
      -In-vehicle fuel map building
      -Can use 5 volt linear lambda sensor
      -Programmable for most crank wheels
      -Max. RPM 16,000.
      -Main 3D maps(20 x 14) have programmable break points.


      PWM OUTPUTS FOR THE FOLLOWING:
      -Water injection (multistage)
      -Speed related power reduction
      -NOS control ignition retard (multistage)
      -Fuel Mix control for endurance racing
      -Twin Fuel pump control
      -Anything else requiring mixture and ignition control linked to an input and an output.


    29. 05-15-2009 10:19 AM #29
      T T T

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •