Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Page 1 of 22 1234511 ... LastLast
    Results 1 to 35 of 768

    Thread: Official Big Turbo Engine Bay Thread!

    1. 12-04-2008 10:26 PM #1
      With all of the affordable turbo kits out now, there are many options for going BT. It seems like everyone has jumped on the BT fun, and lately there has been lots of interest in piecing together kits too. I think a thread where people post just 1 or 2 good engine bay pictures could help a lot of people out. It can show them different ideas for intake manifold/throttle body placements, intercooler piping setups, top mounted/bottom mounted turbo setups, intake setups, catch cans, batteries, etc etc.

      Official? not really.

      Please do not post unless you have a picture, that way the thread will only be a couple pages, and very informative (like the dyno thread)

      Kinetic manifold, 3071r, 4" to 3" 45 degree reducer to 3" intake. 12lb deka battery with room for the intercooler piping to be run that way (much shorter than going down between the intake manifold/battery. windshield wiper reservoir removed for more room for intercooler piping/ BOV.


      again, please do not post unless you have a picture.


      Modified by infinityman at 10:41 PM 12-4-2008


    2. Member GLI_jetta's Avatar
      Join Date
      Jan 2nd, 2006
      Location
      Stroudsburg pa
      Posts
      3,589
      Vehicles
      04 GLI
      12-04-2008 10:39 PM #2
      pagparts bottom mount vband 3076, ran to stock pakcake, piping around the battery(I know its not vortex approved but I still have 13psi by 3700) to an audi TT225 intake mani




      Modified by GLI_jetta at 10:40 PM 12-4-2008

      STROKED 35r

    3. Member
      Join Date
      May 16th, 2004
      Location
      North of you
      Posts
      1,284
      Vehicles
      05 GLI Rswap
      12-04-2008 10:46 PM #3
      pag 3071r kit



      Modified by NS_PHATGLI at 3:47 AM 12-5-2008

    4. 12-04-2008 10:49 PM #4
      also pag bottom mount 2871r


    5. 12-04-2008 10:53 PM #5

      ITS t3/t4e DBB
      ATP Exhaust Manifold
      ATP FMIC Kit w/ custom over engine piping


    6. 12-04-2008 11:04 PM #6
      old set up. gt3076 tube manifold.






      Modified by skywalkersgti at 4:56 PM 12-7-2008

      http://www.pagparts.com/



      # 1 in the business PAG-PARTS!!!!!!!!!!!

    7. 12-04-2008 11:07 PM #7
      kinetics kit


    8. Member kleckers69's Avatar
      Join Date
      Apr 28th, 2002
      Location
      Erie
      Posts
      9,453
      Vehicles
      2009 Tiguan SEL
      12-04-2008 11:08 PM #8
      HS Tuning 2871r BT kit

      my build Included:

      Shearer Fabrications T3 Tubular Manifold with flange for 44mm w/g
      Shearer Fabrications downpipe
      Garrett GT2871R .63 T3 4 Bolt
      Tial 44mm Wastegate
      Tial 50mm BOV
      HS Tuning 3" Inlet Pipe Kit
      HS Tuning Oil/Coolant Line Sets
      Walbro Fuel Pump
      Siemens 630cc Injectors
      IE SAI Block off Plate
      IE 1.8T 19mm Rods
      Shearer/HS Tuning FMIC Kit
      Unitronic 630cc Software
      HPC Coatings for Mani/DP/Turbo
      Snow Performance Water/Methanol Injection setup with USRT Dual Nozzle Upgrade Pack
      Boostvalve dual stage MBC


      Modified by kleckers69 at 11:28 AM 12-5-2008


      Modified by kleckers69 at 11:30 AM 12-5-2008


    9. Member blueb316v's Avatar
      Join Date
      Nov 16th, 2002
      Location
      401 son
      Posts
      2,113
      Vehicles
      08 Jett Set
      12-04-2008 11:08 PM #9
      apr stage3+


      http://facebook.com/kddesignsri Airlift Dealer Contact Me For Pricing
      Bagging The Best Fixing The Rest

      youtube.com/kdjetta03

    10. 12-04-2008 11:10 PM #10
      i like your stock audi tt charge pipe.. always need a map sensor.
      weve all done it come one now..



      Modified by skywalkersgti at 8:14 PM 12-4-2008
      http://www.pagparts.com/



      # 1 in the business PAG-PARTS!!!!!!!!!!!

    11. 12-04-2008 11:19 PM #11
      all me kit.
      BF tubular mani with a GT35R.
      007 largeport manifold with race-craft rail and BBK 70mm TB.
      all plumbing and IC piping, done by me.
      Autronic SM4 prepped by Kevin, installed by, yep you guessed it, me.
      motor built by Trevahhhh. installed by me yet again.

      yeah, its >550whp. yeah its in a rabbit. and yeah, it does not great traction. but still hits low 11's @ 130.

      and did i mention its PINK????? what, me skip a chance to whore it out? never.....


    12. Member velocity196's Avatar
      Join Date
      Feb 19th, 2006
      Location
      Washington
      Posts
      5,512
      Vehicles
      2006 MK4 GTI, 2012 Golf R
      12-05-2008 12:23 AM #12
      heres my all go no show gti that i personally built with the help of a few texers and my local shop helped me with some of the portwork. running the new kinetic kit with a gt35r upgrade with unitronic 830 software, rmr intake manifold ported built head good for 8500rpms, I.E. rods with factory pistons tops her off. have no idea what kind of power im making yet. ive been waiting to get my ecu bug free. what i can tell you is she burn 1st thru 3rd at 24 psi with water meth (75 to 80% meth) and timing increased 6* so i lowered the boost down to 20 psi for daily driving.

      *EDIT* apr turbo back exhaust. 3" to 2.5"

      nothing fancy but here she is




      Modified by velocity196 at 9:29 PM 12-4-2008

      PTE5858 custom top mounted from ->Todd Cope's Horsepower Barn

    13. Member SlowGolf1's Avatar
      Join Date
      Jan 8th, 2007
      Location
      Right Behind You
      Posts
      5,730
      Vehicles
      Right Wheel Drive Turbo
      12-05-2008 12:24 AM #13
      Old
      Full Race mani
      GT3076R .82 Exh AR
      Eurodyne 630cc file

      Current
      Eurojet Manifold
      GT3076R .82 Exh AR
      Unitronic 830cc file


    14. Member boosted b5's Avatar
      Join Date
      Oct 31st, 2004
      Location
      12211, NY
      Posts
      6,775
      Vehicles
      2012 CSG GTI with man pedal. 2008 Hayabusa 1340cc
      12-05-2008 12:37 AM #14
      i dont have an good pictures, and the car is apart now, cleaning things up a bit
      but its a Pag Parts gt3071r bottom mount, eurodyne 630cc, scat rods, je pistons

      currently working on getting rid of the sai,evap and all that finally. intercooler is in the works, arnold is taking care of that. tial q 50mm, when i get all that tied up and have the car back together ill get some better pics

      Take a second and thank a Veteran.

    15. Member NOLA_VDubber's Avatar
      Join Date
      May 23rd, 2007
      Location
      New Orleans
      Posts
      5,228
      Vehicles
      98 M3
      12-05-2008 12:37 AM #15
      Great thread! Here's me contribution:

      ATP GT28RS Hardware Kit
      ATP "Special Intercooler Pipe Set" to stock pancake pipe
      BF SMIC
      Custom DV piping
      Snow STG2 WAI
      ATP Catch Can w/ McMaster-Carr Fittings




      Modified by NOLA_VDubber at 11:41 PM 12-7-2008


    16. 12-05-2008 08:14 AM #16

    17. Member bjtgtr's Avatar
      Join Date
      Dec 13th, 2006
      Location
      MD
      Posts
      1,900
      Vehicles
      2001 A6 2.7T 6sp
      12-05-2008 10:41 AM #17
      Pag Parts T25 2871R .64


      [IMG][/IMG]


    18. Member haenszel's Avatar
      Join Date
      Mar 14th, 2004
      Location
      Buffalo, NY
      Posts
      5,501
      Vehicles
      '00 A4 Avant VR6T, '04 .:R32
      12-05-2008 11:24 AM #18

      AEB/BW s362/02j


      Modified by haenszel at 1:19 PM 12-5-2008

      10.201@143.35mph - VR6T

    19. 12-05-2008 11:28 AM #19
      2007: Pag 2871R, with all personal touches by me

      2008:

      2009: if i told you i'd get banned, but you get the jist (not doing T3 either)


    20. Member DWI_gti's Avatar
      Join Date
      Jan 11th, 2004
      Location
      NJ
      Posts
      2,164
      12-05-2008 11:30 AM #20
      Gt3071r


    21. Member haenszel's Avatar
      Join Date
      Mar 14th, 2004
      Location
      Buffalo, NY
      Posts
      5,501
      Vehicles
      '00 A4 Avant VR6T, '04 .:R32
      12-05-2008 11:31 AM #21
      sav yours doesn't count till it runs :-p
      10.201@143.35mph - VR6T

    22. 12-05-2008 11:38 AM #22
      Not much for bling. lol PagParts 35R 2.0 AEB 02M SEM and UNITRONIC of course etc etc etc


    23. 12-05-2008 11:44 AM #23
      haenszel! you don't drive a broken jpeg!!!!!


      pretty basic. these pics are old.
      now: gt28rs, kinetic fmic, atp h/w kit, maxpsi exhaust, apr r1 dv, revo 550 and genesis 550's, Tial 38mm wastegate (.4 bar spring ).

      future: something bigger (50 trim?), better manifold, unitronic mafless


      Modified by kylecreegan at 8:47 AM 12-5-2008


    24. Member crazyass713's Avatar
      Join Date
      Dec 27th, 2006
      Posts
      5,348
      Vehicles
      01 Golf mid-enine 2.7T Twincharged, 04 B6 USP 2.0T built
      12-05-2008 12:22 PM #24
      Old pic, I'll update it soon:


      2001 Golf mid-engine RWD Allroad 01E 2.7T TVS1320 BW S374 twincharged (long title, I know)

      2004 A4 Ultrasport 2.0T 3076R built to the hilt all the way around (daily sleeper status)

    25. Member NOLA_VDubber's Avatar
      Join Date
      May 23rd, 2007
      Location
      New Orleans
      Posts
      5,228
      Vehicles
      98 M3
      12-05-2008 12:28 PM #25
      I'm sorry, but this is the most epic engine bay thread evaaa!!!!! Please sticky at the top of the forum mods

    26. 12-05-2008 12:30 PM #26
      I'm just gonna say that I'm totally responsible for the "walbro on passenger fender where EVAP was" movement.

    27. 12-05-2008 01:26 PM #27
      I guess alot of the 'flop' has to do w/ the fact that my inlet was designed really for OEM fitment. I'll alter it so it gets better supported. Great pics guys, keep em coming...

      Kind of like this in a finished bay (S3 borrowed from S3rdias)




      Modified by passatG60 at 10:37 AM 12-5-2008


    28. Member DK_GTI_racer's Avatar
      Join Date
      Oct 4th, 2007
      Location
      Denmark
      Posts
      1,606
      Vehicles
      2000 mk4 1.8T - AGU
      12-05-2008 01:29 PM #28
      APR s3+ AGU, more goddies to come in bay

      APR stage 3+ 393bhp & 466nm at 24psi - baby GT2860rs 0,64
      APR intake manifold, Aquamist 1s, milltek 2,75" with VES cutout, HGP IC - software by RH motorsport of denmark - EBC with remote and 2 boost settings for high low boost run.
      Goapr if you want your fast to be faster then everyone else
      www.goapr.com, www.inaengineering.com, www.qedpower.com, www.jvk-tuning.dk

    29. 12-05-2008 02:40 PM #29
      are non-BTs welcome here? haha

      My setup


      GT28R
      custom everything
      550cc injectors with ATP Tune

      by next summer: 3071r unitronic or standalone

      Quote Originally Posted by Us2bA4dr View Post
      seriously, you are 21 years old, and a male, please stop typing like a 12 year old girl....

    30. 12-05-2008 02:59 PM #30
      Shearer Fab manifold/downpipe, HTA3582, 4" inlet, 2.5" IC Pipes...er...I mean it's all stock.


    31. 12-05-2008 02:59 PM #31
      Quote, originally posted by ALT3rEg0 »
      I'm just gonna say that I'm totally responsible for the "walbro on passenger fender where EVAP was" movement.

      Whatever you say, Mr Bighead. Would you like a cookie or a gold star?


    32. 12-05-2008 03:04 PM #32
      Quote, originally posted by Adam@Unitronic.ca »

      Whatever you say, Mr Bighead. Would you like a cookie or a gold star?

      Taken to text message so as to not pollute the thread, and b/c I'm p/m-challenged.


    33. Member slammed86golf's Avatar
      Join Date
      Aug 2nd, 2006
      Location
      canada
      Posts
      1,571
      Vehicles
      86golf 1.8t big turbo
      12-05-2008 03:07 PM #33
      it still in the works


    34. 12-05-2008 03:14 PM #34
      034 tubular mani, gt28rs, eurojet race FMIC


    35. Member Boost Addicted's Avatar
      Join Date
      Jun 10th, 2007
      Location
      Rahway, New Jersey
      Posts
      1,109
      Vehicles
      2013 FIAT 500 ABARTH
      12-05-2008 03:21 PM #35
      ill play... 50 trim setup custom fabbed piping. whole kit pieced together



      Fiat 500 ABARTH
      ig: @senor_diaz
      facebook

    Page 1 of 22 1234511 ... LastLast

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •