spectacular! Wish i lived closer so I could check this thing out!
Update: Slow and steady progress. We have basically a van full of parts on the way---Diff, intercooler, turbo, exhaust,. And the list of things to do is still s long I don't even bother writing it down.
Worked on getting the mk4 dash to fit. Still have to make brackets etc to hold it in place so in these pics, it is just sitting in there a bit out of position.
TDI head fresh from Justice Racing Engines http://www.justiceracingengines.com
TDI Lump pre head removal:
Sunroof Panel test fit, drilled & ready to install after it is painted:
Misc bits for heat & defrost etc...
Quote, originally posted by woodrowstar » NEAT! I have to ask....
1) how do you decide what to have "spares" of?
2) and is the decision to "one off" a part, make it that much difficult to decide?
We typically only have spares of things that are likely to break while we are at an event---Control arms, stub axles, tie rods & ends, etc. If it can't be fixed in a 20-30 minute service by 2 people with basic hand tools in a gravel parking lot, we generally do not have a spare...
Quote, originally posted by BJosePHD » looks great top notch, someday i wish to walk on my garage floor with just socks on...
any chance we will see you in maine this july? i hope the Rally master has sorted through the issues we had last year.
Good chance we will be in Maine this year with one car or another [IMG]http://**********************/smile/emthup.gif[/IMG]
Quote, originally posted by -RalleyTuned- » I see you guys are registered for the olympus rally this month up here in the NW
Not in the Golf, Jeremy will be riding with ACP in his EVO
Quote, originally posted by Greasecar » Looks good Josh! Glad to see you are back at it. I can't wait to see what you are going to put together with that box of fans and rivets.
Quote, originally posted by QuantumProject » Looks good Josh! Can't wait till you get this thing up and running.
Thanks for all the help last weekend.
you making underbody molds?
Quote, originally posted by DemonRally » you making underbody molds?
Not molds, just laying it straight on and bonding it with the resin.
We will be adding some 1" plastic strips with rivets to make sure it does not get pulled loose anywhere.