For Sale & Wanted to Buy

**lowburb** · 09-27-2012 08:28 PM

http://www.clubveedub.ca/forums/view...p?f=19&t=46355

Not mine, Syncro Wagon, no engine, I just hate to see it crushed...

**raddo** · 09-27-2012 09:52 PM

Looking for the rear syncro brake carriers, if you have some just I'm me what you are looking to get for them
Got them thanks VRT

**eatsVetspoopsCivics** · 10-05-2012 12:10 AM

looking for a set of body mounting brackets for the rear end, off of a golf ... or something I can use on a golf MK3

tia

**simon-says** · 10-08-2012 12:35 AM

Looking to buy a complete swap. I would also like a floor pan and fuel tank.

All will be going into a MK3 Golf.

**pileofredparts** · 10-08-2012 08:20 AM

Originally Posted by simon-says

Looking to buy a complete swap. I would also like a floor pan and fuel tank.

All will be going into a MK3 Golf.

mine is posted above. shipping wont be cheap though, i wish you were closer

**simon-says** · 10-10-2012 06:34 PM

Originally Posted by pileofredparts

mine is posted above. shipping wont be cheap though, i wish you were closer

So your saying that you have a tank and floor pan? And shipping is shipping.

**scott66** · 10-11-2012 06:57 AM

Originally Posted by simon-says

So your saying that you have a tank and floor pan? And shipping is shipping.

Yo dude, check your PM as I hooked you up with a couple local guys that have what you want.

**eatsVetspoopsCivics** · 10-18-2012 01:43 AM

I also am looking for an mk3 rear floor pan and fuel tank for a golf

**quick_line** · 10-21-2012 10:40 AM

hello everybody, i am looking for rear driveshaft for mk2 haldex swap.
thanks.

**raddo** · 10-25-2012 09:55 PM

Got a extra set of syncro rear beam mounts that I need to get rid of. The one mount is not painted in the pic because my powder coater guy went on his honeymoon and didn't finish but he will when he gets back. Looking to get $280 plus shipping

**jity86** · 11-10-2012 11:53 PM

looking for a mk2 golf syncro fuel tank. it is the last thing i need for my swap. I have ca$h..

FOUND ALL PARTS THAT I NEEDED THANKS JMAN

**jman** · 11-11-2012 04:40 AM

I have one local.

**Richard James** · 11-26-2012 07:01 PM

WANTED: MK3 VR6 syncro prop shaft. No passat or mk2 please.

PM me

**boner** · 12-03-2012 09:28 AM

i am considering going haldex. if i do, i would have an almost complete syncro system up for grabs. i completely refreshed everything last winter. all seals and fluids. i checked all synchros and bearings. i was told it was a fairly low kms setup when i got it. upon inspection of the internals i have no reason to doubt. it has seen roughly 300hp for 2 trackdays and about 6 tuning sessions since rebuild. no issues.

it would include:
trans
rear diff
propshaft shortened to fit a mk3
rear beam
passat mounting brakets

probably the following:
all four axles... need to see what my solution is gonna be with haldex before i confirm that
i will source the rear caliper brackets, someone local may have a pair.

will NOT include:
rear control arms, i need them still...

the only issue of note on my setup is that there reverse engagement mechanism has been gutted. IE, there is no AWD in reverse. i did this purposely as i wanted one less thing to break on the track. simpler is better. i have the switch for the shift tower still and a few of the parts for it, but it kinda exploded on me when i opened it to be honest!!!

i would LIKE to get somewhere near $1000 for this setup plus shipping (i have spent about that much just getting all the refreshment parts) but i dunno if that's feasible.

but if that's not gonna happen, i'll just stick with it and drive it till i bust it! i have many projects on the go right now and as a result, the syncro is not gonna be available untill the new year which is why this is a feeler to guage interest.

will people want this?

**coupeman** · 12-12-2012 06:22 PM

sold

**elt0m** · 12-22-2012 11:42 PM

WTB: GOLF syncro fuel tank. I'm in cadana so I pay shipping.. I can pay with paypal or something else..

thanks a lot

**scarroll** · 12-31-2012 10:45 PM

I am missing the correct front right axle shaft for this Syncro conversion. Can anyone help?
Steve

**robby1544** · 01-04-2013 04:56 PM

VR6 Belhousing and diff
linkage
rear end haldex and subframe and support brackets
fuel tank and new bottom end

What other parts am I missing?

shipping to 32258
please email me at lloydrobert6@gmail.com

**Dutch1967** · 01-14-2013 09:40 AM

I am missing the correct front right axle shaft for this Syncro conversion. Can anyone help?
Steve

G60 or VR6 (Plus) ?

**jettasmooth** · 01-17-2013 02:49 PM

In need of a junk syncro rear diff. Mainly just looking for the case, but if someone has one that's broken, I need it for making some measurements.

Cheers

**TBT-Syncro** · 01-18-2013 08:49 PM

Originally Posted by jettasmooth

In need of a junk syncro rear diff. Mainly just looking for the case, but if someone has one that's broken, I need it for making some measurements.

Cheers

i have one in pieces some where. if you list what measurements you need, i could get them.

**GermanCoilovers99** · 01-21-2013 04:10 AM

New Coilovers Suspension FK HIGHSPORT in box,Made of Galvanized steel,Made in Germany

Comes with 2 keys

Drop front and rear: 55 to 85mm (2.15 à 3.32 inch)

Fit for :

Golf,Jetta,Corrado MK2 or MK3 Syncro(4 wheel drive)

Price : $775

**GermanCoilovers99** · 01-21-2013 04:11 AM

PM me or email me to buyer_seller_@live.ca if your insterested

**canadian_rabbit_16v** · 01-26-2013 08:50 PM

Need a MK2 golf syncro rear pan and a gas tank!!

**skijumpjamaica** · 02-11-2013 12:43 PM

My MKIV R32 has been FWD for an embarrassingly long time due to a bad controller and pump. I finally have the money to fix both, but would love to find a rebuilt pump and a used controller. Not interested in OEM controllers - I'm open to either the blue or HPA Competition controllers, though.

-Ian

**Golfatron3** · 02-11-2013 10:44 PM

Selling a complete running, driving 92 B3 VR6 Syncro Wagon. Pm for more info.

**jettasmooth** · 02-19-2013 01:19 PM

Originally Posted by TBT-Syncro

i have one in pieces some where. if you list what measurements you need, i could get them.

I sent you a message. Did you get my PM?

**boner** · 03-09-2013 01:50 PM

looking for a viscous coupler... preferably in canada...

thanks

**Golfatron3** · 03-09-2013 05:41 PM

Originally Posted by boner

looking for a viscous coupler... preferably in canada...

thanks

I might need one too. Have you already asked Rune?

**01Jetta20VT** · 03-10-2013 08:06 PM

I need rear axles from a g60 passat or equivalent syncro vehicle. Let me know Brandon@innfab.com

**GrapeBandit** · 04-11-2013 06:41 PM

i have rear diff from 01 a4 1.8t quattro

pm me if needed. located in florida

**chilledOUTmk1** · 04-18-2013 10:26 AM

I am looking for a complete syncro swap, going into a mk2. Loacted in PA. PM me

**raddo** · 04-22-2013 08:45 PM

I got these many years ago while gathering parts for my build, but I found a set with disc so I don't need these any more. They look like crape but are in good condition I promise. $350 takes em

**Rapid Decompression** · 05-06-2013 07:07 PM

Originally Posted by raddo

Got a extra set of syncro rear beam mounts that I need to get rid of. The one mount is not painted in the pic because my powder coater guy went on his honeymoon and didn't finish but he will when he gets back. Looking to get $280 plus shipping

Still available?

**raddo** · 05-14-2013 10:07 PM

Originally Posted by Rapid Decompression

Still available?

They are gone

VWVortex

Thread: For Sale & Wanted to Buy

Thread Tools

Search Thread

Display

Wtb rear syncro carriers

rear beam mounting brackets

Syncro Rear beam mounts

white wagon in ohio

WTB CV Axle front right Passat SYNCRO

WTB everything for a 1992 VR6 (OBDII) Corrado Haldex swap

WTB: syncro rear diff (working or not)

Brand New Coilovers FK Highsport for Golf MK2 MK3 Syncro,Jetta MK2 MK3 Syncro,Corrado Syncro

rear pan and tank!!

WTB Used Haldex Gen 1 pump and upgraded controller

For Sale & Wanted to Buy

G60 syncro rear axles

FS Syncro rear arms

Posting Permissions