Eau Claire, Chippewa Falls, W.Central Wisconsin Unite

[keegers]

^^^ awesome!

Some MK5 love....

why must you torment me..

[inertpyro]

why must you torment me..

You need some A3 love Brah. Its like a MKV but better.

[keegers]

Only in the video games is when I can have my dream car
Pushes over 550hp.... No big deal

[keegers]

You need some A3 love Brah. Its like a MKV but better.

But it's not manual And I can never go back

[Frogbutter]

Tyler and I spent the day together

[inertpyro]

But it's not manual And I can never go back

But its faster than the manual so race car.

Tyler and I spent the day together

Man date. No homo.

[clarkson]

Oops... New motor time

Thanks Matt for the help

Torn down the corrado engine tonigt and found it to be a lot worse than I thought... Stuck valves, bent valve, melted piston, messed up cylinder, metal imbedded in head and pistons in all cylinders.

[Frogbutter]

Man date. No homo.

Come on just a little homo, I cleared it with Joanne.

PARTS
http://forums.vwvortex.com/showthrea...3127-MK2-Parts.

[keegers]

long needed photo dump/ lazy page ownage

[Frogbutter]

Motor and trans out of the Cabby
GAP order placed
Thanks Tyler

Matt K. and Aaron H.
I have a 675mm Radiator, pin mount at bottom, fits both with and without A/C like new with a new fan switch installed. Also like new top and bottom hoses. $75

[m_kufner]

I just replaced mine today with the one off the doner car. I could use.some roof rack legs if you know someone with something like that

[Frogbutter]

I just replaced mine today with the one off the doner car. I could use.some roof rack legs if you know someone with something like that

You will have to pry them from my dead hands....

[GTIsteffen98]

Someone decided to make a little bit of a mistake recently and decided the passenger rear side window on a certain mk3 GTI looks better in a billion pieces on the floor rather than in one piece and on the car. With that said, does anyone know anybody who might know of someone or somewhere I can get a replacement window? The classifieds have turned up nothing and no junkyards in a 400 mile radius have the one window I'm looking for. Any help is greatly appreciated!!

[One-Eight GTI]

Damn, where is everyone

[clarkson]

Teaser


Sent from my PC36100 using Tapatalk 2

[Gyntry]

Damn, where is everyone

Waiting for you to post that you're bringing the Monster to EW...

[SB_GLI]

Waiting for you to post that you're bringing the Monster to EW...

[One-Eight GTI]

Waiting for you to post that you're bringing the Monster to EW...

Its not looking good Lane... Al over at Pag doesn't have anything big enough to handle cranks so he brought it to a machine shop he trusts in NY but like everyone said, most machine shops are always backed up... He is gonna call today and see if there are any new cranks around, if so I'll get a new crank if he has any local and just sell my crank thats being fixed for cheap... When I got my crank it was the last one in America so not too hopeful

[inertpyro]

Its not looking good Lane... Al over at Pag doesn't have anything big enough to handle cranks so he brought it to a machine shop he trusts in NY but like everyone said, most machine shops are always backed up... He is gonna call today and see if there are any new cranks around, if so I'll get a new crank if he has any local and just sell my crank thats being fixed for cheap... When I got my crank it was the last one in America so not too hopeful

Man soo many problems.

I am thinking if I cant sell my car in time to get the TT I am looking at I might just keep it. I figure if I can pay the rest of it off by spring I would still keep it and buy a TT then. Few people interested but no real bites.

[Clean PG]

Teaser


Sent from my PC36100 using Tapatalk 2

you may need to borrow Cory's fender roller to account for all that poke

[SB_GLI]

Its not looking good Lane... Al over at Pag doesn't have anything big enough to handle cranks so he brought it to a machine shop he trusts in NY but like everyone said, most machine shops are always backed up... He is gonna call today and see if there are any new cranks around, if so I'll get a new crank if he has any local and just sell my crank thats being fixed for cheap... When I got my crank it was the last one in America so not too hopeful

I am mad at that IE clutch fork for you. What a POS.

What crank is it that again that you have/had, and why is it so hard to find?

[inertpyro]

you may need to borrow Cory's fender roller to account for all that poke

He needs to run duallys in the back and just make some huge fender flares to hide all the rust.

[SB_GLI]

He needs to run duallys in the back and just make some huge fender flares to hide all the rust.

I agree with this idea.

[shepa401]

Tyler you should slap on some universal truck fender flares or something if you dont get the body done before EW or DIV.. that way you can use your own chair to sit by everybody.. Jus a thought..

[SB_GLI]

I think he should get those chrome trim pieces that go around the wheel well to cover it up. While you're at it, get more chrome strips that go around the doors. I see some ****ty mustangs around town rocking those all the time... It sure spruces up the look of the car.

[shepa401]

I think he should get those chrome trim pieces that go around the wheel well to cover it up. While you're at it, get more chrome strips that go around the doors. I see some ****ty mustangs around town rocking those all the time... It sure spruces up the look of the car.

Spinner hub caps too.. better watch out tyler.. the guy at the mall will be eyeing up your car even more!

[inertpyro]

I think he should get those chrome trim pieces that go around the wheel well to cover it up. While you're at it, get more chrome strips that go around the doors. I see some ****ty mustangs around town rocking those all the time... It sure spruces up the look of the car.

I dont think they make 6" wide chrome strips to cover that hole. I agree those strips seem to always find their way onto Mustangs.

[One-Eight GTI]

I am mad at that IE clutch fork for you. What a POS.

What crank is it that again that you have/had, and why is it so hard to find?

It's out of a 2.0 fsi turbo So everyone that strokes there engines uses this crank so I'm sure when Vw made extras they didn't expect to go through so many as stroking the 1.8t is pretty common now. Also when you get this crank it needs a different oil pump gear pressed on to replace the one it comes with. I actually have a spare gear already. Waiting for a reply from Al to see if there are any other ones around.

[SB_GLI]

It's out of a 2.0 fsi turbo So everyone that strokes there engines uses this crank so I'm sure when Vw made extras they didn't expect to go through so many as stroking the 1.8t is pretty common now. Also when you get this crank it needs a different oil pump gear pressed on to replace the one it comes with. I actually have a spare gear already. Waiting for a reply from Al to see if there are any other ones around.

Idea! Buy henry's whole car for the crank.

[inertpyro]

Idea! Buy henry's whole car for the crank.

HA! I like that idea. Or just swap the motor into my car.

[One-Eight GTI]

Idea! Buy henry's whole car for the crank.

Lol

[clarkson]

New fuel pump came in today... Just gotta put it in

Sent from my PC36100 using Tapatalk 2

[SB_GLI]

Did you get the whole drop in housing unit or just the pump itself?

If you got only the pump and plan on dropping into the old housing, be careful with whatever you decide to use for fuel lines. My first pumped died at 45k, and then I went through 2 more in the next 5-10k. After months of trying to track down why my pumps kept dying (thought it was an electrical issue for the longest time), I finally figured out that the new fuel line that I used was being pinched when it was pushed into the tank, making the pump work too hard, causing failure. Bought a whole brand new drop in unit from GAP for like $180 and all is well now.

[Gyntry]

HAHAHAHA - New Favorite:

[inertpyro]

BBS wheels are sold and shipping out tomorrow. One step closer to what ever I plan on doing.