g-lader belt tensioner damper bushes

[Pete O. Arguelles]

Thank you. I did notice it took about 10 days to ship to Canada and slightly longer to the U.K. for G60pops
Looks like everyone has recieved theirs, and I hope they work out like you need.
Thanks to everyone, Pete

One last thing I'll post a pic of my Corrado as soon as I get the Lysholm Supercharger installed I'm getting the car ready to start showing. I spent many hours gathering the right parts to install this charger like I like. All stainless steel bolts with washers all XRP fittings, I did not like the hardware BBM supplied so I did alot of different things to make it my way. I still lack a stainless braided teflon oil supply line and aluminum oil return flange, I like aluminum it's so easy to work with versus stainless like drilling and tapping.
I also had to pull the front flange and gear cover off of the Lysholm Supercharger so I could retap for XRP fittings for the oil return lines. Last you will be able to see the bushing we made on the tensioner too.

One other thing I have in mind is a Stainless braided over teflon clutch line.
I could go on and on.
pete


Modified by Pete O. Arguelles at 9:24 PM 4-24-2009

[westcoastjay]

any left?

[Pete O. Arguelles]

None at the moment.
Sorry Pete.

[jettag60]

damn us bc guys should have done a group purchase

[the.good.gli]

Quote, originally posted by jettag60 »

damn us bc guys should have done a group purchase

i think i got the last pair

[jettag60]

Quote, originally posted by the.good.gli »

i think i got the last pair

pair as in you've got an extra one??

[the.good.gli]

no you need 2 per tensioner

[noizze]

Installed this weekend, Fit and Finish was superb! Thanks Pete.

[jettag60]

Quote, originally posted by the.good.gli »

no you need 2 per tensioner

ah ya that's right, top and bottom....i forgot about the top one because i have the bbm tensioner cap

my lower one is like a wet noodle

[westcoastjay]

when are more coming? I need a few sets

[Pete O. Arguelles]

More will be coming in a few days. Were making AN fittings for the lysholm supercharger had to re drill and tap the lysholm flange that BBM tapped for some other fittings. Keep ya posted.
Thanks Pete

[dubbinASE]

i wanna set of these, put me on the list.

[Pete O. Arguelles]

Ok, bushings just in. Ready for shipping.
Thanks Pete

[jettag60]

let me know if some local vancouver BC guys are ordering a set

i need just one for my lower (i have the BBM tensioner for the upper)

[Pete O. Arguelles]

Quote, originally posted by jettag60 »

let me know if some local vancouver BC guys are ordering a set i need just one for my lower (i have the BBM tensioner for the upper)

Ok no problem, but the price stays the same 25 dlrs. for one.
20 dlrs. each for two or more to the same address.

I also have the BBM tensioner but I found that I couldn't use it with the Lysholm supercharger w/ stock lysholm pulley and TT aluminum alternator pulley and stock length serpentine belt. It would have made the belt too tight IF I would have been able to get it on.
So I went back to the stock tensioner (used two of our new bushings Awesome fit and finish) luckily I had one and serpentine belt tension was just right.


Modified by Pete O. Arguelles at 8:28 PM 5-5-2009

[jettag60]

i'm not lysholm and not worried about belt lenght

i would have the extra shipped up with someone else's

[westcoastjay]

I need 6. Mike you wanna ship one extra with my 6?

[jettag60]

ya jay....and 6

holy smokes how many g60's you running lol?

3 cars?

[westcoastjay]

I need 7 what is the paypal addy?

[Pete O. Arguelles]

Paypal address is

Parguelles@earthlink.net

You items will be shipped to your paypal registered address unless specified.
Thanks Pete


Modified by Pete O. Arguelles at 9:53 AM 5-6-2009

[westcoastjay]

I actually only need 4, Mike hasn't paypaled me for the other one.

paypal sent

[Pete O. Arguelles]

Ok thanks your items will go out today.
Thanks Pete

[GoTimeInc]

Pete,

sent IM

[Pete O. Arguelles]

Replied to your IM.
Thanks Pete

[Pete O. Arguelles]

Your bushings are in the mail. Thanks for the purchase Jason M.

[GoTimeInc]

got mine today. thanks.

[Pete O. Arguelles]

Quote, originally posted by GoTimeInc »

got mine today. thanks.

That was quick.

[cdncrdoguy]

Pete,

Sent you paypal payment for a set.

Thanks

Mark

[Pete O. Arguelles]

Ok no problem, as soon as I get it I'll send them out.

[Pete O. Arguelles]

Quote, originally posted by cdncrdoguy »

Pete, Sent you paypal payment for a set. Thanks Mark

Thanks for the payment Mark your bushings will go out first thing in the morning. I'm very confident you will be very pleased with them.
Thanks again
Pete

[fishecuss]

Dont wanna rain on anyones parade but theres a company in the uk already doing these bushes and they are almost the same and using viton o-rings.Me and a mate bought some at the weekend £20 a set as we to where they are other than that they are £25 per set shipped.

[Pete O. Arguelles]

Quote, originally posted by fishecuss »

Dont wanna rain on anyones parade but theres a company in the uk already doing these bushes and they are almost the same and using viton o-rings.Me and a mate bought some at the weekend £20 a set as we to where they are other than that they are £25 per set shipped.

Thats cool your not raining on no ones parade. My friend Alberto and I needed some and we started making extra for whom needed. The desighn was totally our own. We didn't know either that someone else was making these. At 25drls UK comes out to 37.9dlr U.S. so it's about the same.
Pete

Modified by Pete O. Arguelles at 7:44 AM 5-18-2009


Modified by Pete O. Arguelles at 7:45 AM 5-18-2009

[fishecuss]

Glad to hear Pete

[westcoastjay]

Got mine today

thanks Pete

[Pete O. Arguelles]

Sorry it took so long but thats the way it is when going out of the country.
Thanks Pete