Charleston, SC Dubs

[RDIRTYTOO]

I second having to work this weekend. Thanks Boeing.

With 9s idk if I would do spacers. Mine are 8s et45 if that helps. I know your not tucking so you may be ok but I would buy the wheels first to see where your at before you do spacers.

Speaking of spacers. Does anyone with 5x112 want to trade two maybe 8-10mm spacers for 13mm ones I have. I use them when I put my stock wheels on and the 13s rub with my setup.

you still lookin for spacers? ive got a set of 5mm that should work nicely

[theguy1084]

you still lookin for spacers? ive got a set of 5mm that should work nicely

Do you have lugs with them

[path0s]

Hey there. I have a brand new, unpainted Mk4 GTI front euro bumper with rubstrips i need to get rid of. Still in the wrapping, never got a chance to put it on my car and then sold it so i have no use for it anymore. I know this isnt a for sale thread but i'm really not trying to ship this thing. Im moving in 2 months and just need it gone. $200. PM me with interest. Thanks!

Man I would be all over this but at the moment I don't have the cash... if I get the rest of my taxes in ill be sure to PM you

-Tapatalk

[RDIRTYTOO]

Do you have lugs with them

no i dont ive been told stock work well and thats how ive used them...

[path0s]

no i dont ive been told stock work well and thats how ive used them...

Are they drilled for a mkv setup? for some reason I'm thinking you drive a mk4 r32.... then again it's 4am

-Tapatalk

[RDIRTYTOO]

Are they drilled for a mkv setup? for some reason I'm thinking you drive a mk4 r32.... then again it's 4am

-Tapatalk

lol ive owned mk5's , but yes theyre actually drilled for 5x100 and 5x112

[theguy1084]

lol ive owned mk5's , but yes theyre actually drilled for 5x100 and 5x112

I'm looking for something a little larger than 5 mm

[RDIRTYTOO]

I'm looking for something a little larger than 5 mm

wheres it going? front or rear?

[theguy1084]

wheres it going? front or rear?

I have 10s in the front now and 13s in the rear. I want to move the 10s to the rear and get 8-10mm for the front. 13s are just too much on the rear for how low I have it.

[audibing]

New sneakers for the tdi . . .Conti DW's . .ordered Monday at 11a.m. arrived Tuesday at 4 pm . .speedy!!

[.:Ryan99:.]

Rich, where did you order them from? I'm going to need new tires on the gli pretty soon.

[path0s]

Tire rack? I plan on getting DW's as well.

-Tapatalk

[audibing]

Yup , tire rack . .225/40/18 @ $162 per tire with a mfgr warranty included . .They had a promo also , get a free NOOK Simple Touch with purchase of 4 Conti's..

Firestone by Northwoods Mall did the mount n balance...$71..

[theguy1084]

Thanks pep boys for the substandard fuel line....

[path0s]

Yup , tire rack . .225/40/18 @ $162 per tire with a mfgr warranty included . .They had a promo also , get a free NOOK Simple Touch with purchase of 4 Conti's..



Firestone by Northwoods Mall did the mount n balance...$71..

Wow I wish I knew about this would have been all over it... but, my step father in law(?) bought two new fronts for my car... when my wife drove it down to florida. Dunno why, they weren't bald or anything, just not as much tread as the rears I had put on not to long ago... but oh well, free tires.

Thanks pep boys for the substandard fuel line....

GG, find one that's not braided nylon in the center but actual mesh and you should be good.

[theguy1084]

Wow I wish I knew about this would have been all over it... but, my step father in law(?) bought two new fronts for my car... when my wife drove it down to florida. Dunno why, they weren't bald or anything, just not as much tread as the rears I had put on not to long ago... but oh well, free tires.



GG, find one that's not braided nylon in the center but actual mesh and you should be good.

I got some today rated for 220psi. It's holding good now with almost 0 timing pull. I'll be hitting the dyno again after I fine tune it over the next week or so.

[path0s]

I got some today rated for 220psi. It's holding good now with almost 0 timing pull. I'll be hitting the dyno again after I fine tune it over the next week or so.

ooooo. I see. I've been driving the wife's car past couple days. But on the other hand... Dude, selecting parts for my car sometimes annoys the piss out of me.

Flakes




May possibly also do powdercoated deep gloss black V710 to match the Deep black/Tornado red I have going.... problem is the bottom trim is that oh so awesome off black.

I'm leaning more towards V710's... loved them since the beginning, easy to clean... can be aggressive yet classy, love the concave, and also love having an open wheel(which is why I stopped looking at the LM's)

Just want to make my first choice on wheels a good one, so i'm taking my time tossing ideas around. Most likely, coils & wheels will be done at the same time... and if I want to go to a deep black powdercoat on the V710's... i'll just have it done myself.

[path0s]

This shows more insight, Hyper black, silver or matte.

[theguy1084]

This shows more insight, Hyper black, silver or matte.

Matte black and that's final!

[path0s]

Hmmmm we shall see. I think matte would be awesome as well. But I like to show a wheel off that's why I'm leaning towards silver.

I know your a big fan of matte.

-Tapatalk

[path0s]

I love the BBS CH's and CO's... CH's are 540 a wheel for black/polished lip. CO's are the exact same wheel, just not motorsport stamped... and only 320 a wheel or so... do love the CO's, and would love to possibly powdercoat them eventually.

Plus side, you can't beat the quality of BBS. My huffs have stood up to a lot of ****, surprisingly they're still in one piece even after hitting a piece of steel when I slid in snow...

[audibing]

GG, find one that's not braided nylon in the center but actual mesh and you should be good.

If u need the right stuff go to Charleston Rubber and Gasket on North Rhett next to Hanahans Pub. .Been using them for years, will custom make lines , steel braided with AN fittings , silicone vacuum lines and are an authorized Aeroquip dealer , they have what u need . .

Sent from my DROID3 using Tapatalk

[path0s]

If u need the right stuff go to Charleston Rubber and Gasket on North Rhett next to Hanahans Pub. .Been using them for years, will custom make lines , steel braided with AN fittings , silicone vacuum lines and are an authorized Aeroquip dealer , they have what u need . .

Sent from my DROID3 using Tapatalk

Would be nice to get a lot of lines redone.

[.:Ryan99:.]

If u need the right stuff go to Charleston Rubber and Gasket on North Rhett next to Hanahans Pub.

They made some custom A/C lines for me a few years ago. Very nice quality.

[path0s]

Yum.

[theguy1084]

Yum.

You still don't have wheels yet? Don't feel bad. I haven't mounted the tires I got yet either.

On another note. Who drives the silver mkv gti on 2nd shift at Boeing? Lowered darker wheels exhaust.

[bluetdijetta97]

The lowcountry VW club is having there monthly meeting this saturday April 21 at 4:00pm at JK Automotive & Performance. Anybody is welcome to come.

[DowJetta1998]

I'll try to swing by.

[path0s]

You still don't have wheels yet? Don't feel bad. I haven't mounted the tires I got yet either.

On another note. Who drives the silver mkv gti on 2nd shift at Boeing? Lowered darker wheels exhaust.

No idea I know I saw it the other day leaving in the vr6

Sent from my Moto Droid using Tapatalk 2

[path0s]

So I noticed you're trying to get vr6. What's the reason?

Sent from my Moto Droid using Tapatalk 2

[theguy1084]

So I noticed you're trying to get vr6. What's the reason?

Sent from my Moto Droid using Tapatalk 2

If I stumbled upon the right one I would. I would love an 04 R32. I love my car but tuning the fsi can be frustrating sometimes. Some days I wouldn't want anything else and other days I want something without a high pressure system

[councit]

Hey guys, I was wondering if anyone knew or had a mk3 euro bumper for sale? Ive got a t-red Gti. Thanks

[bluetdijetta97]

JK Automotive & Performance is a sponsor of SoWo 12 this year. We have to be up there early to set up our booth so we are heading out with a group at 8am on Friday. Not sure where we are meeting yet but it will probably be at the Walmart on main st in Summerville or at our shop. Just wanted to let everybody know what time we are heading out if you want to join in on the cruise to Helen.

[RedVirus80]

Just moved back to Summerville from petersburg,va....Don't ever go to va....You will break **** on those roads lmao. What the word any meetings coming up anytime soon. Also need to talk to james about uping my cam on my 2.0...Oh by the way I'm robert with the murdered mk4 jetta

[theguy1084]

Just moved back to Summerville from petersburg,va....Don't ever go to va....You will break **** on those roads lmao. What the word any meetings coming up anytime soon. Also need to talk to james about uping my cam on my 2.0...Oh by the way I'm robert with the murdered mk4 jetta

I'm from northern va. Roads are roads. Everywhere you go the roads suck. If I was always worried about what the roads looked like I wouldn't ever drive.


Sent from my iPad using Tapatalk HD