man I better be getting some emails soon
Another Busy Week Ahead.
Matte Black Wrapping the E55 AMG Tomorrow, Forged Internals in the Mark 5 R32, Stage 3 for a Mark 6, 02Q Differential Install, +++ Maintenance Services !
We Will be out of the Shop Most of the Day on Friday / Closed this Coming Saturday
New Product Launch !
Redline Speed Worx is Proud to Launch the New Line of Mahle Forged Pistons for the VW / Audi Market !
New from Mahle Motorsport Powerpak+ Division – TSI / TFSI Pistons for All Your BIG POWER Needs.
When it comes to Pistons , Mahle Motorsport Powerpack lead the industry. Precision Forged from a 2618 Alloy and Key Features Include:
Mahle Motorsport PowerPack Line Up:
· Forged from 2618 Alloy (same as JE)
· Available in 83mm Bore & 83.5mm Bore & 9.0:1 CR is Standard With -8 cc Dish in the Piston Dome.
· 20mm wrist pin in standard
All Mahle Motorsport Powerpack Pistons have the following key features:
o Forged Side Reliefs – This Removes Excess Weight from the Skirt of the Piston Resulting in an Overall LIGHTER Unit Compared to Competing Products Currently on the Market
o Slipper Skirt Design (Industry Standard)
o Ultra Flat Ring Grooves
o Grafal Skirt Coating – Proprietary to Mahle Motorsport. This is key for VAG engines with aluminum blocks that are Nikasil / Alusil Treated. Typically aluminum blocks require to be iron sleeved if a Wiseco or JE piston is used, but with Mahle Motorsport Pistons coated with there Grafal Coating, simply boring and honing as you would with an iron block is all that is needed. The Grafal Coating is all used in the reduction of piston noise and aids in giving a “pillow” to the piston skirts.
If you are looking for an UBER Strong but Lightweight FORGED Piston then these are the ticket over the JE Unit. Will require I-beam squared end small rods.
MATERIAL : 2618 Alloy
AVAILABLE BORE – 83mm & 83.5mm bore in 9.0:1 CR
Wrist Pin Size – 20mm
Introductory Piston Pricing - $685 USD
Please Contact Us for Connecting Rod / Piston Package Pricing
Last edited by SALES@RSW; 05-19-2011 at 02:08 PM.
Picture Update !
In Case Any One Didn't Know, We Are An Authorized KW Distributor ! Below a Nice Set of Club Sports For A Customer with Built In Camber Adjustment!
Starting to Rebuild the Engine for the Turbo Mark 5 R32 ! Fresh Set of Lower Compression JE Forged Pistons !
Upgraded The Suspension In This Customers A3 to a Bit Stiffer of Components ! Nice Set of H&R Springs, Bilstein's, Front & Rear APR Sway Bars
Newly Released 1 Piece 044 Bosch Fuel Pump Built Into a Surge Tank ! Kind of Looks like a Bomb to Me
We Just Recently Finished Another Mark 6 TSI APR Stage 3 !
Upgraded The Transmission with a Peloquin LSD As Well !
B8 S4 APR / Carbonio Stage 1 & 2 Carbon Fiber Intake !
Finally Finished The Rebuild of the E55 AMG
55 Getting Ready To Be Wrapped
Finished It off With Some Slick Carbonio Carbon Fiber
We Currently have a C55 AMG In the Shop For An Engine Rebuild
Just Recently Completed the Installation of these ER SMIC's for the B7 A4
A Few Audi's In the Shop For Some Maintenance Work
This White B8 S4 Was In For Some Suspension Upgrades