BFI - Motor Mounts - Polyurethane solutions for your MkV 2.0T, 2.5L, and VR6

[black forest ind]

We are proud to offer our complete line of performance motor mounts for all 2.0T, 2.5L, and VR6 applications. Our line of Full Poly mounts is unlike any other poly options available. They are produced from a two part liquid cast system in several durometers. This results in both a more uniform product as well as a more durable one..

To see our entire portfolio of Mk5/Mk6 engine mounts, .

Please post here, PM, or email us at: sales@blackforestindustries.com with any questions.

[the fuzzy one]

ill see you guys at h2o to pick up a full set for my gti. are you going to be offering any discounts

[black forest ind]

Quote, originally posted by the fuzzy one »

ill see you guys at h2o to pick up a full set for my gti. are you going to be offering any discounts

We never release any info regarding specials until the show See you there!

[the fuzzy one]

will it be worth waiting for and are you guys bringing the mounts to the show

[black forest ind]

Quote, originally posted by the fuzzy one »

will it be worth waiting for and are you guys bringing the mounts to the show

The sales are always worth the wait, unless of course you need one ASAP - We will definitely have the Mounts at the show

[the fuzzy one]

great see u there

[undeadsole]

woohoo, there was another thread that said you guys weren't going to have these in by H20, I guess thats not the case huh??

[black forest ind]

Quote, originally posted by undeadsole »

woohoo, there was another thread that said you guys weren't going to have these in by H20, I guess thats not the case huh??

We are doing our best to have all of them ready for you guys and gals

[SCARLET]

do any of these mounts work on the TDI, specifically a 2005.5 TDI 5 speed?

[black forest ind]

Quote, originally posted by SCARLET »

do any of these mounts work on the TDI, specifically a 2005.5 TDI 5 speed?

Please email us on that one, Thanks

[GodSquadMandrake]

Do you have a picture of where the tranny mount goes on the car? I'm trying to visualize where it installs but I'm drawing a blank.

[black forest ind]

Quote, originally posted by GodSquadMandrake »

Do you have a picture of where the tranny mount goes on the car? I'm trying to visualize where it installs but I'm drawing a blank.

Perhaps this will clear it up for you

http://blackforestindustries.c...s.pdf

[Lt. Crash]

I installed the stage 1 insert last night... WOW! What a difference! After 50,000 miles, the stock rubber was all mushy how it looked on BFI's website. After installation I thought I should've greased it up being that usually poly mounts squeak, but nothing yet. Installation was a breeze so if it starts to squeak, I will just pull it apart again, no biggie. As-soon-as I started my car I could feel the difference that little block made. Subtle vibrations made her feel like my friends gutted MK3. Taking her around the block for a test run was amazing. I have to admit that when I first got my car I did the cosmetic mods at 1st, smoked bumper lights, window tint, etc. But the last few mods, C2 93oct software & BFI trans insert, have made me love my car again. Next mods: Cupkit, NLS shifter w/ 42DD bushings...

[Binary Star]

So my 2.5L rabbit feels super slushy! I can feel the engine movement under acceleration/braking more and more these days. Car has 46k miles... can you recommend which mount is needed? Is it the torque arm insert or the trans mount insert that would help?

TIA!

[black forest ind]

So my 2.5L rabbit feels super slushy! I can feel the engine movement under acceleration/braking more and more these days. Car has 46k miles... can you recommend which mount is needed? Is it the torque arm insert or the trans mount insert that would help?

TIA!

The torque arm would be the easiest and best place to start, not to mention the least expensive. After that if you feel you need more, you can then upgrade with a transmission mount and passenger side mount.

[Binary Star]

The torque arm would be the easiest and best place to start, not to mention the least expensive. After that if you feel you need more, you can then upgrade with a transmission mount and passenger side mount.

Thanks! I'll see you guys @ h20!

[motocaddy]

please make an engine mount for the 2.5L! you'd have the market cornered.

[mdpay]

Just installed my BFI stage 1 mounts. (Engine and Trans, no dogbone) Love it. I had other aftermarket mounts installed and had to remove them due to idle booming (pressure in cabin at idle). They were 85a durometer mounts like many companies make. Loved the performance, but could not deal with the pressure so I took them out and sold them.

The stage 1 65a durometer mounts from BFI are just right. Engine stopped moving around but only a slight increase in idle vibration with no idle booming.

I have a broken dogbone insert from BFI that I removed due to too much idle vibration. I wish BFI made a 65a dogbone insert.

[black forest ind]

Just installed my BFI stage 1 mounts. (Engine and Trans, no dogbone) Love it. I had other aftermarket mounts installed and had to remove them due to idle booming (pressure in cabin at idle). They were 85a durometer mounts like many companies make. Loved the performance, but could not deal with the pressure so I took them out and sold them.

The stage 1 65a durometer mounts from BFI are just right. Engine stopped moving around but only a slight increase in idle vibration with no idle booming.

I have a broken dogbone insert from BFI that I removed due to too much idle vibration. I wish BFI made a 65a dogbone insert.

A 65a durometer dogbone insert would be too soft for the application in our opinion. However, our updated inserts are now 90a instead of our initially produced inserts which came in at a considerably stiffer 98a.

[Hi-Speed]

Bump for my friends at BFI!

I had these installed by the team at BFI on my 08 GTI about a month or so ago and absolutely love them. I had both the motor and transmission mounts installed at about 40k miles. To me they really brought the car back to that "new" feeling. When I first got back in the car it seemed like the vibration from the engine was only slightly increased, but it seems like since the installation that has reduced by quite a bit. I defiantly recommend getting these!

Again thanks to everybody at BFI!

[black forest ind]

so there is not an option for a preassembled OEM MOTOR mount?

Unfortunately no, we do not offer an upgraded preassembled OEM mount.

[black forest ind]

any sales or package special for the following?

Stage 1 - preassemble transmission mount - mk5 2.0t fsi 6-speed
Stage 1 - motor mount - mk5 2.0t fsi 6-speed

PM replied.

[pete@blackforest]

[benser]

ok i think i have a bad mount when i shift back in to first it seems to raise the engine and is not smooth at all also does it shifts from 1st to 2 under high rpms thoughts ?

[pete@blackforest]

ok i think i have a bad mount when i shift back in to first it seems to raise the engine and is not smooth at all also does it shifts from 1st to 2 under high rpms thoughts ?

To better assist you with the problem you're having, we need to establish a couple of things.
Do you have our mounts or do you still have factory mounts?
What do you mean by "raise the engine"?
Please shoot us an e-mail sales@blackforestindustries.com and provide as much detail as possible and we will do our best to help you with the problem you're having.

Pete
BFI

[pete@blackforest]

Promotion has expired.

[pete@blackforest]

Hurry, sale ends Nov 5th!

[pete@blackforest]

[black forest ind]

[SleezyVee]

How aggressive are your stage 2 mounts in comparison to the stage 1 mounts?

[pete@blackforest]

How aggressive are your stage 2 mounts in comparison to the stage 1 mounts?

Stage 1 mounts are approximately 50% stiffer then stock.
Stage 2 mounts are approximately 100% stiffer then stock.

We recommend Stage 2 mounts for high horsepower vehicles, or track/auto-x prepped vehicles.
For daily driven, sub 300-whp vehicles we recommend Stage 1 mounts.

[pete@blackforest]

Thanks for the Black Friday orders everyone! Promo has ended!
We received hundreds of orders and are doing our best to ship them promptly.
Please understand there may be a delay on some orders.
Check your 'Order Status' link provided in your original e-mail receipt.
Thanks!

[pete@blackforest]

Friday Video Bump..

Essen Motorshow- Germany 2011 from Black Forest on Vimeo.

Full Essen Coverage Here

[pete@blackforest]

Two of the best upgrades for a total of $100..
Torque Arm Inserts & Transmission Mount Insert.
If you haven't upgraded yours already, what are you waiting for?

[pete@blackforest]

Help a family provide toys for their tots, while you buy toys for your rides. Purchase this sticker and we will donate the full purchase price to the Toys for Tots Marine Foundation.


And don’t leave yourself out this year. Only you know just what you’re looking for. To help make things easier we are extending a last minute discount on everything in the store just to make sure you get everything our your list. Simply enter the coupon code BFCS11 during check-out and receive 10% off your entire purchase. This promotion is good until 12/18/2011 11:59pm EST and only valid for new order and items currently in stock.

Donate by clicking HERE