BFI - Motor Mounts - Polyurethane solutions for your MkV 2.0T, 2.5L, and VR6

**black forest ind** · 08-20-2009 05:20 PM

We are proud to offer our complete line of performance motor mounts for all 2.0T, 2.5L, and VR6 applications. Our line of Full Poly mounts is unlike any other poly options available. They are produced from a two part liquid cast system in several durometers. This results in both a more uniform product as well as a more durable one..

To see our entire portfolio of Mk5/Mk6 engine mounts,

.

Please post here, PM, or email us at: sales@blackforestindustries.com with any questions.

**MFZERO** · 08-21-2009 12:12 PM

awesome!

**h0ckeyfreek20** · 08-26-2009 04:11 PM

nice!

ive got the BFI stg2 tranny insert and stg2 side engine mount. i love them both!

**black forest ind** · 08-27-2009 10:54 AM

Quote, originally posted by h0ckeyfreek20 »

nice!

ive got the BFI stg2 tranny insert and stg2 side engine mount. i love them both!

**seymore15074** · 08-31-2009 03:45 PM

Can you feel them? Were they a pain to install?

**black forest ind** · 09-01-2009 12:57 PM

Quote, originally posted by seymore15074 »

Can you feel them? Were they a pain to install?

In our opinion, you can feel them (In a good way ) and they are rather simple to install depending on your mechanical ability

**LEWXCORE** · 09-01-2009 01:14 PM

do they come with install directions? I may be interested in the tranny insert and side engine mount both stage 2.

**black forest ind** · 09-01-2009 02:35 PM

Quote, originally posted by LEWXCORE »

do they come with install directions? I may be interested in the tranny insert and side engine mount both stage 2.

Install Instructions for all of our mounts can be found at bottom of our Technical/Service page, Here: http://blackforestindustries.com/service.html

**rippie74** · 09-02-2009 03:28 PM

Quote, originally posted by LEWXCORE »

do they come with install directions? I may be interested in the tranny insert and side engine mount both stage 2.

I have both mounts (stage II). You really don't need instructions. Just take the factory mounts out & put the new ones in their place. Do them both at the same time, the difference is incredible!

**LEWXCORE** · 09-02-2009 04:31 PM

Cool. Feels more solid?

**seymore15074** · 09-02-2009 04:47 PM

Quote, originally posted by rippie74 »

I have both mounts (stage II). You really don't need instructions. Just take the factory mounts out & put the new ones in their place. Do them both at the same time, the difference is incredible!

Is stage II practical for a daily driver? I don't mind a little vibration but I'll pass on getting a sore a$$ from it....

**rippie74** · 09-03-2009 12:12 PM

Quote, originally posted by seymore15074 »

Is stage II practical for a daily driver? I don't mind a little vibration but I'll pass on getting a sore a$$ from it....

Yea I felt the vibration right away, but its a "good vibration" (haha no pun intended, beach boys) anyway its great I have close to zero engine movement, open up the hood & rev the motor to 6000 rpm & with the naked eye, or at least my eyes (20/20 vision) I cannot see the motor move @ all... not even 1mm. lol its insane

**seymore15074** · 09-04-2009 07:23 AM

Quote, originally posted by rippie74 »

Yea I felt the vibration right away, but its a "good vibration" (haha no pun intended, beach boys) anyway its great I have close to zero engine movement, open up the hood & rev the motor to 6000 rpm & with the naked eye, or at least my eyes (20/20 vision) I cannot see the motor move @ all... not even 1mm. lol its insane

I'll add this to my wish list. Thanks.

**undeadsole** · 09-08-2009 04:59 PM

super interested... will you guys definitely have these at H2oi?????

**black forest ind** · 09-08-2009 05:00 PM

Quote, originally posted by undeadsole »

super interested... will you guys definitely have these at H2oi?????

It is a mad rush at this point, but we do plan on having the entire assortment there

**undeadsole** · 09-10-2009 11:41 AM

Quote, originally posted by black forest ind »

It is a mad rush at this point, but we do plan on having the entire assortment there

Great to know!! Oh man I'm going to be soooooooo broke after H2o....

**2.0tWolsfburg** · 09-11-2009 01:52 PM

Just put the torque arm insert in and

Much crisper just as intended.
Will get the other mounts ASAP.

**seymore15074** · 09-22-2009 09:18 AM

So with the pre-assembled transmission mounts you don't have to drill out the rivets?

**black forest ind** · 09-22-2009 10:05 AM

Quote, originally posted by seymore15074 »

So with the pre-assembled transmission mounts you don't have to drill out the rivets?

No, the preassembled mounts come ready to install

**seymore15074** · 09-22-2009 10:44 AM

I just ordered stage 2 of all three...

**seymore15074** · 09-26-2009 11:10 AM

Quote, originally posted by seymore15074 »

I just ordered stage 2 of all three...

See my post in the 'Notchy shifting' thread for a little review...

**John@20Squared** · 10-04-2009 09:04 PM

Looks good!

**seymore15074** · 10-05-2009 09:08 AM

Quote, originally posted by seymore15074 »

See my post in the 'Notchy shifting' thread for a little review...

By the way, they have settled in a little since the install...stage 2 mounts are awesome. They were pretty rough the first week.

**black forest ind** · 10-14-2009 12:39 PM

BFI's New Facility Construction Progress

**rippie74** · 10-16-2009 01:05 PM

I have both Stage II BFI mounts in my car & I went to the track & launched @ 3500 rpm on Drag Radials & had ZERO WHEELHOP...

**brekdown29** · 10-21-2009 01:25 PM

When will these be available again?

**black forest ind** · 10-26-2009 12:59 PM

They should be available within the next few weeks.

**dubman6** · 12-15-2009 12:37 PM

I kno its a dead thread but i dont wanna start a new one. Why do you have to drill rivets in the mount? cant you just pry the 2 pieces apart? lookin to get both engine and tranny next week and want to know everything before i purchase.

**black forest ind** · 08-26-2010 11:32 AM

Originally Posted by dubman6

I kno its a dead thread but i dont wanna start a new one. Why do you have to drill rivets in the mount? cant you just pry the 2 pieces apart? lookin to get both engine and tranny next week and want to know everything before i purchase.

Alive

**rippie74** · 08-31-2010 06:56 PM

Originally Posted by dubman6

I kno its a dead thread but i dont wanna start a new one. Why do you have to drill rivets in the mount? cant you just pry the 2 pieces apart? lookin to get both engine and tranny next week and want to know everything before i purchase.

Just use a grinder on the rivet points to seperate them. They are riveted together.

**MFZERO** · 09-01-2010 03:03 PM

love my stage 2 mounts (motor & trans). put them in after waterfest and haven't noticed any change in the feel of the mounts since install. I drive the car everyday and love it

**black forest ind** · 09-01-2010 04:17 PM

Originally Posted by MFZERO

love my stage 2 mounts (motor & trans). put them in after waterfest and haven't noticed any change in the feel of the mounts since install. I drive the car everyday and love it

**dubman6** · 09-02-2010 08:34 PM

Originally Posted by h0ckeyfreek20

nice!

ive got the BFI stg2 tranny insert and stg2 side engine mount. i love them both!

Big Difference??

**black forest ind** · 09-03-2010 11:44 AM

Originally Posted by dubman6

Big Difference??

Our Poly mounts make a substantial impact on controlling wheel hop and locking down the drivetrain. They also happen to improve driving enjoyment as well

**rippie74** · 09-03-2010 12:40 PM

Originally Posted by black forest ind

Our Poly mounts make a substantial impact on controlling wheel hop and locking down the drivetrain. They also happen to improve driving enjoyment as well

TRUTH. My Stage II Mounts are fantastic. I couldn't imagine my car without them. Shifting gears is a breeeeze.

VWVortex

Thread: BFI - Motor Mounts - Polyurethane solutions for your MkV 2.0T, 2.5L, and VR6

Thread Tools

Search Thread

Display

BFI - Motor Mounts - Polyurethane solutions for your MkV 2.0T, 2.5L, and VR6

FV-QR

Re: (h0ckeyfreek20)

Re: (h0ckeyfreek20)

Re: (seymore15074)

Re: (black forest ind)

Re: (LEWXCORE)

Re: (LEWXCORE)

Re: (rippie74)

Re: (rippie74)

Re: (seymore15074)

Re: (rippie74)

Re: (undeadsole)

Re: (black forest ind)

Re: (black forest ind)

Re: (seymore15074)

Re: (black forest ind)

Re: (seymore15074)

FV-QR

Re: (seymore15074)

Re: BFI - Motor Mounts - Polyurethane solutions for your MkV 2.0T, 2.5L, and VR6 (black forest ind)

Re: (brekdown29)

Re: (black forest ind)

Posting Permissions