Does anyone know what Wray Volkswagens policy on modified cars is?
#2276
(2) 16x8 mesh wheels (can't remember the et) 5x120
free to a good home!
ones sanded, ones nasty.
![]()
#2277
Does anyone know what Wray Volkswagens policy on modified cars is?
APR Stage I || Carbonio CAI Stage I & 2 || New South Boost Gauge || 20% Tint
#2278
if u can get n touch wit a guy there named Ryan(if he's still there, he used to be on here) in sales he may be able to give you some insight. There's another guy with a modded gti that's a salesman can't remember his name, but he had some APR stuff done.
#2279
Not sure about their "policy" but I doubt they are going to say they "don't care". Wray VW Service is horrible. Every time I have been there they are full of crap. I took my car in for a door lock problem, knowing that via Vag-com I had error codes for a part in the ignition switch (codes that would return if cleared) - and they told me that there were no codes. I wouldn't trust them with any vehicle. IF I ever have to visit a dealer again I'll goto the new McDaniels place.
#2280
They refused to work on my 00 Gls when they figured out I had an apr chip...That was a couple years ago. Ive never taken it back since.
![]()
#2281
Clutch went out again... think it's the master cylinder, slave cylinder was leaking too, hope it didn't get any on the clutchWaiting on the hydraulic hose (which cost $100 from the dealer
)
#2282
I guess I'll try my luck at the McDaniels one. Thanks for the insight guys.
APR Stage I || Carbonio CAI Stage I & 2 || New South Boost Gauge || 20% Tint
#2283
I've got my car for sale, 97 GTI VR6 in Columbia, let me know if anyone is interested.
- Steiner
#2284
Neither wray or mcdaniels would install H&R lowering springs for my B7. But brown motor works said they would do it for me. But McDaniel's did turn their head on HIDs when I took it in for service. They said if they noted in my paper work it could effect my warranty so I guess they ok with mods but just won't do them for you.
Sent from my iPhone using Tapatalk
Euro switch, 30% 3M nano ceramic tint, Chinese BiXenon headlights and LED tail lights, H&R springs, paddle shifter steering from V6, 20" Giovanna Kilis wheels, 225/35ZR20 Conti DWS tires
#2285
Do you guys have regular meets? I'm moving from Ft. Lauderdale by the end of next month.
#2288
Looking like i will be back soon! I may go to SOWO.
The road to riches is paved with Jolly Ranchers!
#2289
Between the clutch not fully disengaging so I couldn't shift into any gears, and slipping at high boost after a while, been replacing everything. Clutch has maybe 40k on it, about 1.5 years in. So far replaced:
-clutch master cylinder
-clutch hydraulic hose
-clutch slave cylinder
Pulled the transmission off this morning since none of the above helped, other than getting the pedal to feel normal again and not extra stiff, and still can't pinpoint what happened. Thought a spring from the clutch disc or a finger from the pressure plate would have fell off. Even the throwout bearing is quiet.
Going to get the flywheel resurfaced and purchase another clutch and pressure plate, and clutch fork. Pivot pin was fine, replaced it last time.
#2290
I've been on hiatus from the 'tex for a loooooong time, so I figured I'd make some effort to pay attention to what the hell is going on.
Obligatory recent pic of the ride (Taken yesterday):
![]()
#2291
The road to riches is paved with Jolly Ranchers!
#2294
Last edited by vdubdezl; 05-11-2012 at 05:26 AM. Reason: Don't like what I wrote!
#2295
Found my problem this morning after bolting my resurfaced flywheel back on
Looks like that ring snapped or fell off the track and was preventing the pressure plate to retract fully from the clutch disc.
Should have the new clutch and pressure plate by tomorrow
#2296
Guys, I need a lift and a tranny jack to swap a tranny. Is there anyone in Sumter that can help me out with that?pretty pleasety
#2297
#2298
Yea no need for a lift, done it both ways and i prefer not on a lift
The road to riches is paved with Jolly Ranchers!
#2300
Transmission back on, everything now is GTG
Welcome back Brandonwas working swings yesterday, saw you guys come in
#2302
^ seen that car as well, think it has black wheels? Any1 know the guy in the gray mkv gli with the fmic?
#2303
#2304
Got the Passat lowered today.
Sent from my iPhone using Tapatalk
Euro switch, 30% 3M nano ceramic tint, Chinese BiXenon headlights and LED tail lights, H&R springs, paddle shifter steering from V6, 20" Giovanna Kilis wheels, 225/35ZR20 Conti DWS tires
#2306
No cup kit available yet just H&R springs with stock shocks. There aren't any new shocks that I could find for the B7 yet either. I could have went with the coil overs for 3 times as much.
Sent from my iPhone using Tapatalk
Euro switch, 30% 3M nano ceramic tint, Chinese BiXenon headlights and LED tail lights, H&R springs, paddle shifter steering from V6, 20" Giovanna Kilis wheels, 225/35ZR20 Conti DWS tires
#2307
-Nick-
2001 Audi allroad Quattro
2003 VW Passat GLX 4Motion Wagon
#2309
My 06 TDI package 1 that I will have to sell in the next couple of weeks.
![]()
Last edited by vdubdezl; 05-16-2012 at 08:56 PM.
#2310
Thanks
Sent from my iPhone using Tapatalk
Euro switch, 30% 3M nano ceramic tint, Chinese BiXenon headlights and LED tail lights, H&R springs, paddle shifter steering from V6, 20" Giovanna Kilis wheels, 225/35ZR20 Conti DWS tires