MKV GTI 4Motion Swap Pics

[rissa422]

A couple random shots for now. The garage is a disaster area but ignore that.

Some Goodies in the hatch

R floor pan and tank

R Rear under the car after mock up

Poor R32 had a rough year and a half

Found this little fellow hanging out below the work bench

[mystery chip 1.8t]

shoulda just bought an S3... DUH

[l88m22vette]

What manifold is that?

[rissa422]

Its the BSH / AFI manifold. Its a very nice, well constructed piece. I've seen AFI manifolds on evos and when I heard BSH was working with them, I had to have one. Its everything I wanted and more.

[rissa422]

Quote, originally posted by mystery chip 1.8t »

shoulda just bought an S3... DUH

shoulda just bought an evo....

[O2VW1.8T]

so the floor is different, thats kinda gay.. I was hoping it would be like my B6 audi... It was bolt in to do my AWD swap in my B6 FWD audi... congrats on doing it. Keep posting updates

[mystery chip 1.8t]

Its technically a bolt in I guess. Just have a spare tire well in the way... and missing bolt holes for the gas tank... and no brackets for the drive shaft carrier but Not bad overall.

[O2VW1.8T]

Quote, originally posted by mystery chip 1.8t »

Its technically a bolt in I guess. Just have a spare tire well in the way... and missing bolt holes for the gas tank... and no brackets for the drive shaft carrier but Not bad overall.

Ahhh so just little stuff. Thats not bad at all

[mystery chip 1.8t]

Its still a lot of work but def not at hard as doing it in an mk4.... But you wouldn't know anything about that now would you!

[O2VW1.8T]

Quote, originally posted by mystery chip 1.8t »

Its still a lot of work but def not at hard as doing it in an mk4.... But you wouldn't know anything about that now would you!

[maloosheck]

Competition

Good luck. I am making a list of all bolts and nuts as well as special tools I will need for my mk5 4motion swap.

Did you get that R32 from Underground that was listed in the R32 parts for sale?

[O2VW1.8T]

Quote, originally posted by maloosheck »

Competition Good luck. I am making a list of all bolts and nuts as well as special tools I will need for my mk5 4motion swap. Did you get that R32 from Underground that was listed in the R32 parts for sale?

No i did my swap about a year or more ago, Cars gone now

[rissa422]

Quote, originally posted by maloosheck »

Competition Good luck. I am making a list of all bolts and nuts as well as special tools I will need for my mk5 4motion swap. Did you get that R32 from Underground that was listed in the R32 parts for sale?

Yeah the parts are from the TR one Underground had. That was a good deal.

I messaged you a little while ago with some haldex questions. Are you planning on hooking yours up like factory? I guess its 6 pins so four signal wires from the abs module, one for the esp and one for the e brake. Have you looked into the wiring much yet?

Heres some side by sides of the R and GTi floor pans.

Here you can see how much deeper the GTi spare tire well is

Top view

Here you can see the differences in the cross beams. The GTi spare tire well only ties into the unibody rail on the drivers side where the R has a beam that goes across the entire floor.

Also the beam is larger on the GTi creating clearance issues with part of the 4motion subframe.

I also noticed that the R has a significantly greater number of spot welds than the GTi. Not just around the rear but the whole car.

[rissa422]

Also, Maloosheck, it was your thread that inspired me to do this in the first place.

We're definitly going to routes with this though.

TDi 4motion Jetta <-- Practical and unique

500hp 4motion GTi <-- Not practical at all

[maloosheck]

Quote, originally posted by rissa422 »

Are you planning on hooking yours up like factory? I guess its 6 pins so four signal wires from the abs module, one for the esp and one for the e brake. Have you looked into the wiring much yet?

I do. I can send you wiring diagram if you need one.

[maloosheck]

Quote, originally posted by rissa422 »

We're definitly going to routes with this though. TDi 4motion Jetta <-- Practical and unique 500hp 4motion GTi <-- Not practical at all

Believe me, if VW had made 3.2 VR6 TDI engine, it would be in my car by now ;-)

[rissa422]

That would be epic. If you'd be so kind as to send me that wiring info it would be much appreciated!

[TiCk_FLiP]

NE updates rissa? Watching yr build carefully...

[rissa422]

Nothing new. Hopefully will have some time to work on it soon. It needs to be mobile by the end of the month.

[foxracr10]

LOL... your lease is up on the 30th.. get that thing on some wheels!!

[Issam Abed]

I just realised who this was!
Hi Carissa!
Thanks for picking up where "bill" left off...

[mystery chip 1.8t]

hey Issam, take a guess who's garage this thing is being worked on in?

[Issam Abed]

Quote, originally posted by mystery chip 1.8t »

hey Issam, take a guess who's garage this thing is being worked on in?

Well I see a 2JZ-GTE in the corner so I assume it belongs to a certain sell out...

[mystery chip 1.8t]

ouch... I'm a go fast enthusiast... weather it be VW or Toyota. I didn't force that guy on the jersey turnpike to rear end the 20th also speaking of which.. when can i get my eurodyne chip tuned?

[foxracr10]

Quote, originally posted by mystery chip 1.8t »

also speaking of which.. when can i get my eurodyne chip tuned?

UH OHHH... gettin a wee bit off topic arent we?.. LOL

[Issam Abed]

Quote, originally posted by mystery chip 1.8t »

ouch... I'm a go fast enthusiast... weather it be VW or Toyota. I didn't force that guy on the jersey turnpike to rear end the 20th also speaking of which.. when can i get my eurodyne chip tuned?

What to come into town in January when it dies down?

[mystery chip 1.8t]

that sounds good to me. now back to awd mk5!!!!

[dirtyd14]

I have been looking into this for a LONG time now...... my only downfall is that i dont know what tranny is capable to mount up to the 2.0t FSI to allow for AWD..... i already found al the R32 parts needed...... If someone could chime in and let me know what tranny is needed for the swap!

[rracerguy717]

Quote, originally posted by dirtyd14 »

I have been looking into this for a LONG time now...... my only downfall is that i dont know what tranny is capable to mount up to the 2.0t FSI to allow for AWD..... i already found al the R32 parts needed...... If someone could chime in and let me know what tranny is needed for the swap!

Im going to use AWD 02m 6speed out of a Audi TT quattro it can be out of approx 2001-2004 ish must be from a 4cyl car Bob.G

[mystery chip 1.8t]

Quote, originally posted by rracerguy717 »

Im going to use AWD 02m 6speed out of a Audi TT quattro it can be out of approx 2001-2004 ish must be from a 4cyl car Bob.G

yeah that is the same trans we are using. we got our trans off of an AMU TT 225 motor. we should have some good updates for everyone this week.
here is 2 pictures to hold you guys over

[Shawn O]

Sweet project!

[rissa422]

Quote, originally posted by rracerguy717 »

Im going to use AWD 02m 6speed out of a Audi TT quattro it can be out of approx 2001-2004 ish must be from a 4cyl car Bob.G

I have a 01 tt225 trans. everything looks good so far. You have to put the R transfer case on the tt trans though as the rear must match the t-case. It LOOKS like this shouldn't be a problem. We will see though.

[jsharp4684]

I just came across this thread. Any chance you could link the pics? They aren't working for me. I've started rolling my pennies to do the 4motion conversion on my GTI. Can't wait to see what you're able to do with this setup.

[foxracr10]

word on the street... this thing is on all 4 wheels again??? Quit being lazy and post up some pics for the people damnit!!!

[mystery chip 1.8t]

it sure is on all fours... Still waiting on the motor from the machine shop. so its got a pretty sweet reverse rake goin... will post pictures soon