Quote, originally posted by 16plus4v » ^^ Can you post your logs ?
- With w/m and 29psi on the a4 (bep s366) there was pretty much 0 timing pull, Timing up top was around 16-17* and could have ran more. At 25psi no meth it was pulling approx. 1-2 degrees which is fine. Anything under 3-4* timing pull is decent. Anything higher you should look into makin some adjustments.
- Your 104 oct if pulling 0 timing clearly shows you have room to bump it up.
- If you cant post some logs, what is your timing looking like between 4-7k ?
Modified by 16plus4v at 1:53 PM 11-29-2009
i did the logs on a friends computer so i dont have them . but id say the timing looked good until it hit 5500rpm or so and it would jump up to 3.75 then it was hitting 5.00 by 6500 then 7000rpm it was at 6.25.
ill actually go out and do some logs here in a hour or 2 so ill be able to post them up. but they are not going to be accurate because there is 2 gallons of 110 in the tank with about 7 gallons of 93.