*** IE Connecting Rods Specials @ CTS Turbo ***

[CTS Turbo]

Hey Guys, we currently have 20+ sets of IE rods on our shelves for a variety of applications. We can ship to the US or Canada without brokerage fees. So if you're in Canada and you need a set of rods shoot us a PM or order online, no brokerage/duties will be charged. If you have any questions feel free to post or PM

Integrated Engineering 1.8t Forged Rods For Late 1.8 Turbo Engines 20v 19mm Audi - 389.99USD shipped






Integrated Engineering 144 x 20mm Forged Rods 1.8t, VW 16v, Early 8v - 389.99USD shipped





Integrated Engineering Tuscan 144 x 20mm Forged Rods 1.8t, VW 16v, Early 8v - 539.99USD shipped




Integrated Engineering 154 x 21mm Forged Rods Audi 6 CYLINDER 12V 30V - 809.99USD shipped





Integrated Engineering Drop In 2.0 FSI Connecting Rods - 389.99USD shipped





Integrated Engineering 164 x 20mm Forged Rods for 12V VR6/24V VR6/R32 Engines - 759.99USD shipped

If there's something you don't see here the chances are we have it on our shelves, or we can get it to you asap. If you're doing a BT build drop us a line for a potential package deal with some fueling components, we also have 1,000's of injectors in stock of various sizes and impedance's.

Thanks!


CTS Turbo

[CTS Turbo]

Another stock order just came in

[Scotmbb107]

Any rods for the A4 Aeb engines? Too many mixed opinions on if the AEB has 19mm wrist pins or 20mm. Care to clear this up for me and others. Thanks. I figure the first set you have listed is for the AEB. Just want to make sure.


Modified by Scotmbb107 at 8:52 PM 4-10-2010

[CTS Turbo]

Quote, originally posted by Scotmbb107 »

Any rods for the A4 Aeb engines? Too many mixed opinions on if the AEB has 19mm wrist pins or 20mm. Care to clear this up for me and others. Thanks. I figure the first set you have listed is for the AEB. Just want to make sure. Modified by Scotmbb107 at 8:52 PM 4-10-2010

Yup, they're on the site here:

http://www.ctsturbo.com/produc....html

You have to click the AEB option, the standard 20mm's require machine work to drop into AEBs. So click the AEB option and you're gold.

[Rippinralf]

All PM's replied

[99.5blacka4]

why do standard 20mm rods require machine work? the AEB is 20mm wrist pinned 144mm rods, stock.. you need to machine the block if you are using an ABA crank but stock crank you dont need to do any machine work.

[CTS Turbo]

why do standard 20mm rods require machine work? the AEB is 20mm wrist pinned 144mm rods, stock.. you need to machine the block if you are using an ABA crank but stock crank you dont need to do any machine work.

These are specially designed for 058 blocks with intermediate shafts. They have been redesigned, and do not require modification to the intermediate shaft!

You'd really think the manufacturer of the connecting rods has a good idea of what they're doing with their own connecting rods. Intermediate shaft modification is required on some builds when using aftermarket 144x20's and that's a well known fact, you can find details and pictures on vwvortex if you search hard enough

This is a for sale thread not a misinformation thread

[99.5blacka4]

I've talked to Pete MANY times and he's never mentioned it.. It does say it on their site at the very bottom, down past the descript..

dont get an attitude Clay, I was misinformed, considering i've talked to pete about buying them for my setup and it was never made mention.

[CTS Turbo]

I've talked to Pete MANY times and he's never mentioned it.. It does say it on their site at the very bottom, down past the descript..

dont get an attitude Clay, I was misinformed, considering i've talked to pete about buying them for my setup and it was never made mention.

No attitude, Spreading misinformation is not a good idea especially in our for sale threads. If you have any doubts about the need for this product or that, you should do a bit more research before potentially misleading forum readers. I've been friends with Pete and Dave for close to 10 years now and I'm very familiar with their product line as we are their largest dealer.

[CTS Turbo]

Integrated Engineering rods in full effect.

[G-low]

im also very curious on why the standard 20mm's require machine work to drop into AEBs

[CTS Turbo]

im also very curious on why the standard 20mm's require machine work to drop into AEBs

They're too wide and interfere with the block, the SCAT rods don't require machining. I believe IE's new design should not require machining but those are a few months out.

If you need a set of SCAT rods we brought in a few sets to hold us over until IE gets their new batch of rods in the next 3-4 weeks.

[CTS Turbo]

Tried to go grocery shopping last night.

Cops had other plans.



www.ctsturbo.com

[CTS Turbo]

www.ctsturbo.com

Our FSI BT Kit in action.

[L.I.VW13]

do you have any 20mm ie rods in stock? Need a set asap if you do.

Tony
FFE Racing

[CTS Turbo]

do you have any 20mm ie rods in stock? Need a set asap if you do.

Tony
FFE Racing

We had 10 sets, sold them all, re-ordered 10 sets and they are not available as of 08/02/11

[CTS Turbo]

www.ctsturbo.com

[CTS Turbo]

[CTS Turbo]

Please check out our blog and facebook for the latest updates: www.ctsturbo.com & www.facebook.com/ctsturbosystems

[CTS Turbo]

www.ctsturbo.com

[CTS Turbo]

Rods !

Come get some!

[CTS Turbo]

[CTS Turbo]

[CTS Turbo]

[CTS Turbo]

Dear Santa,
this Christmas I would like the followings:
integrated rods
a set of siemens 630s
a walbro inline
....

Ok here's a scoop guys, Rudolph developed a drinking habit (that red nose isn't magic...) so Santa had to switch to a Eurovan diesel for deliveries. Unfortunately it's pretty cold around the north pole and Santa has no electricity to plug his van in. Save your car the deception when she finds that out on the faithful morning and order from www.ctsturbo.com , we ship everyday, worldwide and no matter the weather!

[CTS Turbo]

[CTS Turbo]

[dubbed_up_daz]

im building a BT engine AEB code for my mk1,happy to bump your thread for some in-depth chat

[CTS Turbo]

im building a BT engine AEB code for my mk1,happy to bump your thread for some in-depth chat

Thanks for the thread bump

Unfortunately the IE rods don't work with the AEB without block clearancing.

[dubbed_up_daz]

Not sure if ive seen this posted in here,found it on you tube but basically a 212mph Bonneville run on low boost with an IE engine

http://www.youtube.com/watch?v=BKdBv...&feature=share

[jettaowner718]

Do you have rods for 2.8 30v

[CTS Turbo]

Do you have rods for 2.8 30v

We do have those in stock, PM for details

[CTS Turbo]

Ordering online? If you are don’t forget to look in the bottom of your box for summer swag. Lucky customers will receive CTS Summer Swag… which could include T-Shirt (you mad bro?), CTS coveted bottle opener, CTS Lanyards, and CTS plate frames. Sneak peak of Summer Swag goodness: