I can haz "hood" ride

**Sr. Karmann** · 02-02-2010 02:31 PM

Pink is the new chrome

**VeeDubScott** · 02-02-2010 02:48 PM

I like your europlate

**ein** · 02-02-2010 07:51 PM

Quote, originally posted by TheBurninator »

Rob you actually have to touch yours first

True, I can't argue there. At least I buy it stuff. I'm thinking I'll get my act together come spring, get the stuff I don't need to spend $ on out of the way (cough, wiring). Come to think of it I haven't bought it anything in a while....

Quote, originally posted by DUBZAK »

Satin Silver 93 and Classic Green Pearl are 2 completely different animals.

You'll be lynched for it.

I know, I know. I'm getting into the silver though. Its all this guy's fault.

And the other one with the 3 piece Modernlines and the Laminex'd lights.

**DUBZAK** · 02-02-2010 08:05 PM

Yeah, he let us know he's alive the other day! and he went 17's!!!!!!
That car is going to be SICK.

sent ya a message btw.

and:
Block dropped off. I have 1 week to make a choice on rods since this will be done in about 2.

I am pleased with the happy median I chose as far as versitility should I want to go back N/A, I can. That was the reasoning behind my piston choice.

Hanz' is pleased. Apparently, some FL locals are calling this guy cause of a few posts...lol.
I am giving him free advertising.

Finally, no knife edging is going to be done at the recomendation of the machinist. He said he can do it and can rebalance it, but after time and money talks about this build, I decided to not go there. We will however rebalance the crank.

**DUBZAK** · 02-17-2010 03:44 PM

maybe an act of despiration, may not happen, but as of now..... wheels are for sale.
http://forums.vwvortex.com/zerothread?id=4766964

Modified by DUBZAK at 4:16 PM 2-17-2010

**TheBurninator** · 02-17-2010 04:03 PM

Quote, originally posted by ein »

I know, I know. I'm getting into the silver though. Its all this guy's fault.

Blake's car is the dogs bollocks

**dapucker1** · 02-17-2010 05:00 PM

makes me HATE red :/

**DUBZAK** · 02-22-2010 03:33 PM

Red is the new pink if pink is the new chrome!

Anyways....stopped by the machine shop....hasnt touched my block at all.....
Swears he will get it done this week and has been backed up like a mofo. He builds NASCAR motors so I assume these guys are skilled enough, just seem to be short handed.

I was going to use a B3 passat chin spoiler, but after fit testing I dont like the look on the sides as it does not match the bumper without a lot of trimming on both pieces.

I did pick up a lip that matches my wonderful sideskirts and need to smooth a lil line out of em.

oh yeah....SOMEONE BUY MY WHEELS.

**sdezego** · 02-22-2010 05:26 PM

Short handed is good thing. That means he is doing all of the technical stuff himself instead of having some degenerate lackey who is dreaming of a clear face and getting laid for the first time putting his hands all over it

**DUBZAK** · 02-22-2010 05:41 PM

Thanks for showing the good side on that

**dasbeast3.0** · 03-02-2010 10:56 AM

I bet yer feenin' to get that motor back together. Whats the new wheel choice?

**DUBZAK** · 03-02-2010 11:53 AM

no new wheel chice...I was in a bind for $$$$ but came out ok. wheels are staying here...for now.

and the machine shop still has the block. i havent driven the car yet this year and am TOTALY fiending.

**DUBZAK** · 03-12-2010 01:14 PM

I can has more progress than kyle.

Monday, block should be done. then the reassemble happens.

**TheBurninator** · 03-12-2010 01:16 PM

whats up with this new found bashing of me in all the build threads

I am headed up to the shop again this weekend for more dent pulling action.

**wantacad** · 03-12-2010 01:30 PM

Quote, originally posted by TheBurninator »

whats up with this new found bashing of me in all the build threads

I am headed up to the shop again this weekend for more dent pulling action.

I think I'm going to create a build thread just so I can bash you as well.

"Damm my MK1 project is slow but, you should see this kid named Kyle in the Corrado forums. My dead grandmother works faster."

**TheBurninator** · 03-12-2010 01:35 PM

Quote, originally posted by wantacad »

I think I'm going to create a build thread just so I can bash you as well.

"Damm my MK1 project is slow but, you should see this kid named Kyle in the Corrado forums. My dead grandmother works faster."

Deal you can make a build thread, but you have to get me on stlvw.org so I can burninate them.

**wantacad** · 03-12-2010 01:42 PM

Quote, originally posted by TheBurninator »

Deal you can make a build thread, but you have to get me on stlvw.org so I can burninate them.

Our admin sent me a PM a week later after my latest round of posting. He wasn't too happy with me.

**TheBurninator** · 03-12-2010 01:44 PM

Quote, originally posted by wantacad »

Our admin sent me a PM a week later after my latest round of posting. He wasn't too happy with me.

I am IP banned after your little stunt on the CO local boards They thought it was me!

I just want to tell all the mk5 kids how awesome they are on stlvw! Send the admin a PM and tell him i'm not a troll

**wantacad** · 03-12-2010 01:59 PM

Quote, originally posted by TheBurninator »

I am IP banned after your little stunt on the CO local boards They thought it was me!

I just want to tell all the mk5 kids how awesome they are on stlvw! Send the admin a PM and tell him i'm not a troll

I resigned up on Metro.

Yeah that would go over well, i tell our admin you're not a troll and then you come crap the place up.... Get a new name and put some st.louis details in your profile. Our guy appoving everyone isn't too bright.

*edit* read this and try http://www.stlouisvw.org/stlvw...=3698

Modified by wantacad at 1:02 PM 3-12-2010

**DUBZAK** · 03-12-2010 04:28 PM

Quote, originally posted by TheBurninator »

whats up with this new found bashing of me in all the build threads

I am headed up to the shop again this weekend for more dent pulling action.

Motivational Inspiriational, do you even have the motor picked out though?

**TheBurninator** · 03-12-2010 04:30 PM

Quote, originally posted by DUBZAK »

Motivational Inspiriational, do you even have the motor picked out though?

Motor is picked out, i just need to save some money up/sell a kidney to afford it. Anyone want an A6? Hell 100 bucks to the person that totals it!

**dogger** · 03-12-2010 04:59 PM

BurnBashing is the new thing here.

Kyle you need to stop being the customer and step over to being the supplier. Than you can be a true baller get your ride going with some Asantis and bling!

Plus you get free hookers and blow with that gig!

**TheBurninator** · 03-12-2010 05:02 PM

Quote, originally posted by dogger »

BurnBashing is the new thing here.

Kyle you need to stop being the customer and step over to being the supplier. Than you can be a true baller get your ride going with some Asantis and bling!

Plus you get free hookers and blow with that gig!

I think I do need to start running a side business.

**DUBZAK** · 03-12-2010 08:16 PM

lol we ALL could be on the other side of the counter and actually get paid for this!

Quote, originally posted by TheBurninator »

you have 2 days to have the motor together... do it now, don't question me

After a remark like that, I believe i get one Free Kyle Bash pass.

**dasbeast3.0** · 03-12-2010 10:32 PM

Quote, originally posted by DUBZAK »

After a remark like that, I believe i get one Free Kyle Bash pass.

Can I have one too? Kyle bashing ftw! Wheres Mcnair dammit? He's always down for some good kyle bashing. Someone go pull him outta the mk3 forum. Come on . We know yer lurking.

**DUBZAK** · 03-13-2010 12:12 PM

I sent McNair pics....He is watching. You know he likes to watch!

**DUBZAK** · 03-18-2010 01:23 PM

Update:
$785 for a deck, bath, bore, hone, retaped repair on one accessory bracket holes, main bearings installed, ARP main studs installed, internediate bearings installed, crank put back in.

Picking the block up tomorrow. This build is getting expensive really quick.

**Sr. Karmann** · 03-18-2010 07:22 PM

pics or it didn't happen

**DUBZAK** · 03-18-2010 11:20 PM

its gonna happen. pics tomorrow.

**Sr. Karmann** · 03-19-2010 12:12 AM

**DUBZAK** · 03-19-2010 07:59 PM

Rods are going out next for resizing, and am staying with stock and ARP hardware since It will be N/A for the initial set up.

Made another order to Four Season Tuning today for some gaskes and such....Thanks again James.

Still have a lot of work to do.

**dogger** · 03-19-2010 08:34 PM

Everyone's build threads have progress except for one...

**Forty-six and 2** · 03-19-2010 09:08 PM

Looks good! What color are you painting it?

Quote, originally posted by dogger »

Everyone's build threads have progress except for one...

...and not even any sh*t chat either! Did his feelings get hurt????

**Sr. Karmann** · 03-19-2010 09:29 PM

how'd you know I was selling a couch?

**DUBZAK** · 03-20-2010 02:21 AM

Resizing rods for the ARP, so its back to machine shop nn Monday.

Should have dropped them off earlier.

Quote, originally posted by dogger »

Everyone's build threads have progress except for one...

My progress is slow, and way beyond budget already......I still have stuff to do that I talked about doing months ago. I have the parts, just no good excuses.

Quote, originally posted by Forty-six and 2 »

Looks good! What color are you painting it?

I gotta figure out a color that will flow woth Carbon Fiber, LZ5k , and the Current Classic Green colors.
Open to sugestions on that. You guys have taste.

Quote, originally posted by Sr. Karmann »

how'd you know I was selling a couch?

cause you asked for pics. and they happened.
http://www.youtube.com/watch?v=8kEryR5wj9o

VWVortex

Thread: I can haz "hood" ride

Thread Tools

Search Thread

Display

Re: FV-QR (DUBZAK)

FV-QR

FV-QR

FV-QR

FV-QR

Re: (dapucker1)

Re: (DUBZAK)

Re: (sdezego)

Re: (DUBZAK)

FV-QR

FV-QR

Re: FV-QR (DUBZAK)

Re: FV-QR (TheBurninator)

Re: FV-QR (wantacad)

Re: FV-QR (TheBurninator)

Re: FV-QR (wantacad)

Re: FV-QR (TheBurninator)

FV-QR

Re: FV-QR (DUBZAK)

Re: FV-QR (TheBurninator)

Re: FV-QR (dogger)

FV-QR

Re: FV-QR (DUBZAK)

FV-QR

FV-QR

Re: FV-QR (DUBZAK)

FV-QR

Re: FV-QR (DUBZAK)

F**K Your Couch!!!!

Re: F**K Your Couch!!!! (DUBZAK)

Re: F**K Your Couch!!!! (dogger)

Re: F**K Your Couch!!!! (DUBZAK)

Re: F**K Your Couch!!!! (Sr. Karmann)

Posting Permissions