NEW- Lets see your 16V TURBO 16VT with SPECS!

[vwflygti]

Ok. Just realized video won't help cause tach doesn't work. So I'll post a log.

[Sr. Karmann]

Ok. Just realized video won't help cause tach doesn't work. So I'll post a log.

[Evil16v]

I guess I'll bite..... This 16vt has a long history .. It started w a k26 .... Roughly 12yrs later me and my son brought it off the engine stand (was fresh still) mounting a k26/27 hybrid 1.5 yrs to date it's now big turbo'd on a full k27 ... Its the daily....

Here's the specs..sorry it's been awhile so some specs I don't remember lol..
2.0 head reworked completely ported w shorter guides valves recut, springs etc.
Metal head gasket
One off "turbo" cams by crane cams yrs back... Like 290 something I forget the exacts
Custom sidedraft carb intake modded for injection on single plenum (nothing was really avail in the late 90's)
Remote FP regulator
Custom fuel rail
ABA stock bottom end , balanced rods
Modded intermediate shaft
Lightened flywheel with 4 puck
Retained ABA serpentine setup w diesel bracket w/ g60 a/c compressor , modded n balanced crank pulley , PS retained as well
Trans is combo g60 and vr6 gearing w modded linkage an short shifter

The interesting stuff:
Larger obd2 tb from r32/s4
AEB , DBC (drive by cable) OBD2 ECU
Upgraded larger MAF in blow-thru form
ICM deleted and hardwired
Rewired 2.0 FSI Coilpacks
Modded distributor for home signal/cam sensor using 16v and Audi v8 shaft and 8v ABA sensor..
Charcoal can relocated and wired as are both primary and secondary o2's, the latter is dead tho.

Oil cooler looped for now till proper spot can be found , stocker is now removed
Fully scannable ...
True AN fittings / braided lines (there's a couple left still)
Copper/brass radiator
Swapped VR twin fan setup
As mentioned K27 turbo
Large log style manifold
External 944 turbo wastegate 2" dump
Wastegate modded to actuate as a twin port gate for faster spool ..
RFL BOV ...
Large Front mount (courtesy of a Saturn sky)
1 pc 2.5" turbo to intercooler boost pipe
3" intercooler to TB/intake piping
3" turbo back side dump exhaust.. No kitty
Manual HKS bleeder valve set @ 20 psi on 93 Pump , daily'd everyday all day ....
But when it gets terrestrial out there, I've had it to 25....

[vwflygti]

Ok. Just realized video won't help cause tach doesn't work. So I'll post a log.

Should get back to logging this weened and I'll post one up chad.

[Sr. Karmann]

Should get back to logging this weened and I'll post one up chad.

No rush bro, was just curious

[vwflygti]

No rush bro, was just curious

Oh also. Xtremevdub should have something for you today...

[Sr. Karmann]

Oh also. Xtremevdub should have something for you today...

Oh, surprises for me?

He said you tossed something in with his air box, whatever it may be and a

[ncbrock]

the things I would do to have the tools\fab skills to make that front crossmember. I need something like this for my carb swap. radiator options are limited with the stock cross member

[Sr. Karmann]

radiator options are limited with the stock cross member

AFCO Scirocco rad FTW

[vwflygti]

Oh, surprises for me?

He said you tossed something in with his air box, whatever it may be and a

Don't even know if it will work for you. But I'm sure you know someone who can use it.

[Sr. Karmann]

Don't even know if it will work for you. But I'm sure you know someone who can use it.

werd, he got to the box yesterday and let me know there was a white ceramic turbo mani in there. Thanks a ton Fred, one step closer now ............

[vwflygti]

werd, he got to the box yesterday and let me know there was a white ceramic turbo mani in there. Thanks a ton Fred, one step closer now ............

cheers

[Evil16v]

the things I would do to have the tools\fab skills to make that front crossmember. I need something like this for my carb swap. radiator options are limited with the stock cross member

X2 .....

[Sr. Karmann]

cheers

Laid my hands on it today and is being stashed for the build, thanks again Fred

[vwflygti]

Laid my hands on it today and is being stashed for the build, thanks again Fred

No prob man. Got something else for you.....
1.2 bar at 4700




And then this.....


boom goes the dynamite

[Sr. Karmann]

No prob man. Got something else for you.....
1.2 bar at 4700




And then this.....


boom goes the dynamite

What the Fu(k happened man?

[clove911]

thinking turbo went pop

[vwflygti]

thinking turbo went pop

No. Bottom end rattling. stock aba rod went or rod bearing spun. Loss of oil pressure so could be either or.....

[Evil16v]

No. Bottom end rattling. stock aba rod went or rod bearing spun. Loss of oil pressure so could be either or.....

Damn....

[clove911]

time for some new rods and bearings. i'm thinking SKAT

[vwflygti]

time for some new rods and bearings. i'm thinking SKAT

Will be building a built block for this thing. In the meantime I'm going to clean the crank, polish and throw a set of rid bearings in. New bottom end build coming soon. Obd1 aba again of course.

[Sr. Karmann]

Will be building a built block for this thing. In the meantime I'm going to clean the crank, polish and throw a set of rid bearings in. New bottom end build coming soon. Obd1 aba again of course.

.........

[vwflygti]

So I used some real fine emery cloth on the crank. Looks really good. Gonna check with plastigauge today when the bearing get here. Might be able to save this after all. Time will tell.

[Sr. Karmann]

So I used some real fine emery cloth on the crank. Looks really good. Gonna check with plastigauge today when the bearing get here. Might be able to save this after all. Time will tell.

Nice man, fingers crossed for you

[vwflygti]

Nice man, fingers crossed for you

So I got the bearings installed plastigauge tonight. Limit on rod bearings is .12 and mine measured .08. So I'm going for it. For those interested I'm building another obd1 aba block while driving this one. Will have aftermarket rods and pistons. Thinking 2.1 liter.

[Sr. Karmann]

So I got the bearings installed plastigauge tonight. Limit on rod bearings is .12 and mine measured .08. So I'm going for it. For those interested I'm building another obd1 aba block while driving this one. Will have aftermarket rods and pistons. Thinking 2.1 liter.

Hell ya

[BoostingSlow]

There are lot of sweet builds in here. Hopefully I'll be able to share some pictures and video with you guys by the end of the summer. I just need more money so I can finish.

[LamaMk1]

ok. here's mine thats waits for some things to be finished..


KR 1.8L
S2 rods and pistons
mk1 oil cooler block connections
051 head casting with KR cams
audi S3 intake manifoold
S2 exhaust manifold
S3 injectors
passat 20vt fuel rail
RS2 k24 7200 turbocharger
Mercedes sprinter intercooler
02a vr6 CHN gearbox with g60 bellhousing
passat g60 cable shifter

i have digi1 with 16vt chip but it will be replaced with VEMS.
I really hope that I will get it runnin this year...

Pictures will come as this thing sits into its place..


edit here's one of turbo

[MOTA BOY]

To si ti polirao?

[89cabrioletmarc]

I know this is probably a dumb question and everyone's gonna say use the search button but I'm thinking of attempting a 16vt build and I was wondering what is a common fuel system to run on. My cabriolet is on CIS right now. Would I be able to push about 15-20 psi or would I have to swap the fuel system?


---
I am here: http://tapatalk.com/map.php?ikvws2

[meinDUB]

[QUOTE=89cabrioletmarc;77404414]I know this is probably a dumb question and everyone's gonna say use the search button but I'm thinking of attempting a 16vt build and I was wondering what is a common fuel system to run on. My cabriolet is on CIS right now. Would I be able to push about 15-20 psi or would I have to swap the fuel system?


I hear the entire cis system is good to about 8 lbs.. I'd say stand alone like megasquirt or digi 1 with bbm chip but that's just from research not from experience.. I'm piecing together my digi swap from motronic, just dealing with maintenance issues atm.



Sent from my toilet..

[LamaMk1]

2: Mota.. skoro... to je boja

2: 89cabriomarc you can use K-jet but that's not gonna give you that power you are looking for, and it will never do what will MegaSquirt or VEMS do...

[89cabrioletmarc]

2: Mota.. skoro... to je boja

2: 89cabriomarc you can use K-jet but that's not gonna give you that power you are looking for, and it will never do what will MegaSquirt or VEMS do...

Thanks guys. I'll do more megasquirt Research.


---
I am here: http://tapatalk.com/map.php?dpcgaq

[vwflygti]

Do more vems research ;-)

[Sr. Karmann]

Do more vems research ;-)

Building a MS3 as we speak, another 16v of course