**Introducting PAG's New Installation Facility**

[AL@PagParts.com]

Serious question, can you offer these in standard T3 inlet? Look at the hoops we went through for the 3076 housing. I bet they would sell well, especially a good iron to match your manifolds.

I'm a vband kinda guy lately but I will have the more standardized housings done sooner or later. SS production is just not for the squeamish

[gdoggmoney]

I'm a vband kinda guy lately but I will have the more standardized housings done sooner or later. SS production is just not for the squeamish

I hear you, and I know you spoke of how the SS stuff was a pain even with the manifolds but the results!

I will have a dyno soon of your bottom mount kit on a 100% stock really high mileage smallport motor with 3651's(had a head done around 100k, now at 192k). I think it is going to be very surprising in a good way. Motor has good leakdown and good cold/hot compression.

[AL@PagParts.com]

I wished i could say bring it down and put it on our MD rollers but over a year and I still cant find the time to set her up. But when when we do, bring it!

[audihere04]

I wished i could say bring it down and put it on our MD rollers but over a year and I still cant find the time to set her up. But when when we do, bring it!

I can't wait for this!

[18T_BT]

I wished i could say bring it down and put it on our MD rollers but over a year and I still cant find the time to set her up. But when when we do, bring it!

Set it up Arnold, give me and gdog an excuse to come up and visit

[speed51133!]

looks nice as usual man.
you should update your website! so much stuff not on there!

[Rod Ratio]

[audihere04]

Congrats to Loudgli. Solid results with the help of our SS vbanded Billet 71R kit on 25psi w/m. This is on an FSI BTW.

What octane was used in the car if you don't mind me asking.

[AL@PagParts.com]

93oct and meth

[formerly silveratljetta]

Al I will call you up either this week or next to order that Walbro 400 pump. Been real busy lately studying for the FL bar exam

[Rod Ratio]

Uuuuuuup!!

[Gulfstream]

was cool to see your shop in person Arnold. Now that nasty PPT .72AR turbine housing have some Norwegian fingerprints all over it

[Vegeta Gti]

hawaii..do it...

Sent from my SPH-D710 using Tapatalk 2

[screwball]

Hey Arnold are there any turbos that fit on the T3 Mani on the B6s? Any of the 28R series?

[AL@PagParts.com]

Unfortunately no. The t3 manifolds are not compact enough J

[AL@PagParts.com]

Putting icing on the cake of a long term project. Custom intake being finalized. Waiting on TB to finish her off and then IC plumbing



On another subject. New billet 73mm wheels coming early next month

[One-Eight GTI]

Looking good Arnold

[Vegeta Gti]

must have a new wheel!!

Sent from my SPH-D710 using Tapatalk 2

[Rod Ratio]

Damn! Do Werk son

[AL@PagParts.com]

SS Vbanded Bottom Mounted kit with 5558SP and inlet to optional air filter shield.

[18T_BT]

What does that shiny intake mani look like Arnold?


Love the intake set up, maybe I'll pick one up from ya if you can incorporate a MAF into it?

[audihere04]

Heading to track tomorrow to put down some times.

[AL@PagParts.com]

Good luck Tony

Val you mean this one?

[Dub-Nub]

SS Vbanded Bottom Mounted kit with 5558SP and inlet to optional air filter shield.

He means this one

[AL@PagParts.com]

I know. Its a modded small port intake that the customer had. Longitudinal love

[Vegeta Gti]

yes....now i know i can get an avant for the wife and make it fun

Sent from my SPH-D710 using Tapatalk 2

[Vegeta Gti]

another huge shout out to arnold, since he has been a clutch masters dealer for over a decade went to him for my new fx400.

easy process, fast delivery from ny to hawaii. now, installation.

thanks again arnold!!

Sent from my SPH-D710 using Tapatalk 2

[One-Eight GTI]

another huge shout out to arnold, since he has been a clutch masters dealer for over a decade went to him for my new fx400.

easy process, fast delivery from ny to hawaii. now, installation.

thanks again arnold!!

Sent from my SPH-D710 using Tapatalk 2

Arnold is the man, As soon as he gets a new flywheel for me for my FX400 I can get my car back together new crank, dowelpinned for crank gear, welded triggerwheel bolts and dowelpinned flywheel to crank ect... He is gonna make it bulletproof

[Dub-Nub]

Arnold is the man, As soon as he gets a new flywheel for me for my FX400 I can get my car back together new crank, dowelpinned for crank gear, welded triggerwheel bolts and dowelpinned flywheel to crank ect... He is gonna make it bulletproof

Make sure that clutch fork is good

[One-Eight GTI]

Make sure that clutch fork is good

It will be because Arnold is reinforcing my factory fork... At least I should get a nice new Steel cnc'd one from IE for free,(Says Pete) once I get it It will be for sale in the classifieds I'm done with IE, never should of strayed from Arnolds quality products

[speed51133!]

arnold,
I have one of your t25 bottom mount manifolds. I made an adapter to convert it to vband.
The bolts keep backing loose, and I have tried expensive thread lock rated to 2000 deg. F.

I have also tried special locking nuts for aircraft application.

I think the studs themselves back loose.

anyways, I am wondering what kind of rod do you use to weld the wastegate flanges to the manifold, as I am going to just weld the adapter on. Many people have many different opinions as what rod is best on cast, but it seems you know what works best for your manifold.

Thanks!
BTW, your PM box is full!

[gdoggmoney]

I know. Its a modded small port intake that the customer had. Longitudinal love

[speed51133!]

btw, if anyone converting to a ss vband wants to sell a cast iron vband....hit me up (1.8t)

[VRT]

What's the warranty on the v-band manifold?

[Gulfstream]

Congrats to Loudgli. Solid results with the help of our SS vbanded Billet 71R kit on 25psi w/m. This is on an FSI BTW.

Does this car have cams?