I have a brand new never been used C2 Pro.Maf ecu chip with the Pro.Maf and all the couplers needed. I have been building my car since the new year and I just really want to get on e85 so Im changing my management. Pics on request I can even include a 4in intake with the 3.5-4in reducer coupler.
Things you get:
ECU with the 630cc Pro.Maf Chip for the 12v vr6
Pro.Maf w/ filter
4in intake to the turbo if using a atp manifold
These can be had from c2 for 1349 I would like 1250 shipped with paypal. You save $100 for something that just sat in my room in the box. I need it gone asap so make offers cash talks.
hey guys. i have pretty much parted the racecar of all its goodies save a few things.
i have my set of gold lenzo front wheels (no slicks) and rear drag wheels with skinnies. plenty of life left in them. all in great condition.
the rear centerbores have been machined to fit vw hubs. fronts haven't been touched as i always ran spacers.
fronts weighed 22 lbs with 23x8x13 M&H's and rears are 20lbs
looking to get 650 for the set. (no slicks)
also have a full set of 33mm spacers i can throw in for another $100 they bolt to hub and wheels bolt to them.
Last edited by crazydubman; 09-06-2010 at 09:53 PM.
im selling my 034 stage 2c management. used for one dyno session and 2 track days. thats it...
what comes with the setup
stage 2c ECU
wiring harness for OBD1 vr6
034 relay panel
034 waste spark coilpack (comes with alum mounting bracket to mount in factory location)
034 plug wires (have mk4 style plus ends for easy removal)
looking to get $2000 shipped for everything
aeromotive FPR single inlet 40-over 80 psi
034 fuel pressure gauge
aeromotive fittings and stainless lines to mount to a vr6 with SRI to factory hardlines
200 shipped for the set
everything in this picture minus fuel rail
Last edited by crazydubman; 09-02-2010 at 08:20 PM.
I have a brand new IE pin kit for early 20v, 16v, or ABA crankshafts. This is insurance an your motor, belive me I bent all 20 valves in my motor cause of not having this. This is the only company selling this right now. $160 shippped anywhere in the US...
I QUIT FWD SUCKS
depends what you want, you have to bring spindles unless your buying the DDS race axles, and as for the shell, I can leave the gauges, and coilovers depending on the money. The steering wheel is coming out, but the belts and seat stays. I would say $1800 leaving everthing in except spindles and steering wheel. has new tie-rod ends and poly a-arm bushings you know I would hook you up
I QUIT FWD SUCKS
I had these on the VW for Drag Racing, 0 street use. No clear coat ,so as shinny as you want to make them, I kept them very clean, no marks on the rims.
conical seat, or stud with correct nut,washers.
Very light:7.2lbs on my digital scale
$300 for the pair +shipp OBO.
www.gatewaycup.com), I was involved in a Crash Sunday,and spent the remainder of the day repairing the bike for Monday's race.(Im fine but the guy that was under me, ... ) I sent my Cell via IM...I'm home until Friday afternoon, then another bike event , then I'll be in Baltimore Mon-Wed. Not ingoring anyone, most of the guys here know me, I'm just insanly busy at the moment.