2010 Drag Racing Classifieds

[XXX008XXX]

WELD Racing 13X9 wheels with 24.5X9X13 slicks. 8 passes on tires $700
Custom divided VR6 turbo manifold T4 set up for dual MVS wastegates... uses stock 3-1 exhaust manifolds $450 with downpipe and wastegate dump tubes.. (i will also throw in the one charge pipe from the turbo to the intercooler)
Samco sport hoses for 12v with aluminum Y for upper hose $150

[xtremvw3]

Brand new lugtronic 1.8T made for mk4, comes with every possible option, just received it all pressure sensor, bosch coil, 70psi MAP sensor, ecu etc etc all info contact Kevin black as i dont have all the info in front of me 2200$ shipped

[xtremvw3]

exospeed 13x10 5x100 5" backspacing star 5 front and matching star 5 skinnies in the back brand new only test fitted, all wrapped up on brand new Mickey thompson 24.5x9x13 25x4.5x15 rear 1900$ shipped for the whole set

[ern79]

23x8.5x15 M&HS
9 passes on them. Like new

300 obo
8135971456

[IMAN973]

Brand new ID 1000's 48-14

$425 shipped

[07wolfsburg]

300 obo
8135971456

Size?

[ern79]

23x8.5x15

My bad...

[07wolfsburg]

23x8.5x15

My bad...

5x???

Wish they were 24.5

[ern79]

23s will do just fine. Better chance of not breaking

[07wolfsburg]

Bolt pattern?

[18T_BT]

Bolt pattern?

those are AVUS wheels which are 5x100

[ern79]

Yes 5x100!

[Njegos18t]

i have the same tire-wheel combo they work great

[ern79]

I just dont know how to drive!! Haha...still couldn't get below 2.0 60 fts with my VRT...got frustrated after 9 passes...now for sale

[vrsick coupe]

up fore sale is and ap tuning 4 speed gear stack

1st 2.67
2nd1.81
3rd1.32
4th1.05
all some comes with reverse gear

i bought this stack off todd p in good shape going a diffrent route with the car
2k firm call or txt me 978 880 1170

[JoHnsVrT]

I got up for sale as a package deal only this is a great chance for you to make 500whp.

Reason I am selling is im upgrading everything on my car dont need this laying around

I have up for sale 4 inch maf housing with maf t67 turbo .82 ar exhaust housing kinetic 12v manifold 630cc injectors 3 inch aluminum intercooler piping custom for a 12v vr6 with short runner
C2 60# software. So basically if your looking to turbo your vr6 this is what ya need.

This made a little over 500 whp on my car has about 800 miles of driving/racing on it.

Asking 1650 obo.

Best way to reach me is text 908-313-1225

[carbide01]

Link to my goodies: http://forums.vwvortex.com/showthrea...0#post78911950

[veersixxx]

http://forums.vwvortex.com/showthrea...4#post79057004

used estyles custom vr6 header $800

available for pick up at h2oi next weekend

[misconduct]

I have a ecu and complete engine harness with maestro7 from a 337 2003 for sale. the buyer will have the password for the account to have the maestro logger and editor. i will include a mercedes-benz throttle body (73mm) with the harness. the shipping will be bill to the buyer. i'm in canada. the price is 1100$ obo
my phone number is 450-888-2181 feel free to call me or text !

[inovillo]

FS: 02J 228mm ClutchMasters FX400 with Eurospec solid flywheel...

This setup was used for less than 1K miles and both the pressure plate and flywheel were balance by the machine shop. The clutch disc has plenty of life left and there's nothing wrong with any of the components. I'm going a different route now as the car will be making more power and will not be daily driven anymore.
This setup will hold over 500whp without a problem. The price is at $375 + shipping (if not local).
If interested please send me a PM.

Ivan.


.

.

[carbide01]

2.1L Longblock built to withstand 1000+ hp, and 9000rpm

• ALH block $400
• AEB head. $350
• Custom ARP 12mm to 11mm head studs - $600
• Modified OEM headgasket $100
• Supertech Dual Valvespring + TI retainer kit $450
• Supertech Inconel Exhaust Valves $280
• Supertech SS Nitrided Intake Valves $260
• Custom ground Integrated Engineering Cams for 700-1000hp, custom degreed by Pete. with cam gear $1100
• Pauter "HD" X-Beam Rods with ARP Custom Age 625 Bolts $1000
• Custom Arias pistons, spec'd for 50+psi, 10:1 compression, and the best rings they could supply, with tool steel pins. $700
• ALH crank
• Block clearanced for ALH crank and Pauter rods
• ACL Bearings $250
• Adjustable Cam Gear
• Mechanical Tensioner setup from IE with timing belt, custom water pump for TDI block, etc $300
• TDI oil filter housing with Mocal sandwich plate for oil cooler
• New modified crank sensor to work with TDI block
• Oil pan with 10AN return fitting
• More I am sure I forgot.

Can't find receipts for machine work, but total is well over $6,500 invested, plus countless hours to figure things out. Motor has less than one mile on it before I decided to part car out to pursue another project. Runs PERFECT. $4800.

[confused.]

Have a 24v head that needs to be cleaned, around 60k miles.
Also have ignition coils.

Looking for $250

Located in Union, NJ
not really looking to ship

[ALRDesign]

1990 Atlas Grey Jetta shell

http://forums.vwvortex.com/showthrea...lling-shell-NJ

Turns out I don't have the time to invest in it between working and going to school full time.

I also have a brand new 9lb Aluminum flywheel for 2.0T FSI MKV's for sale

[rtolay]

brand new 02j diff installed never driven its thenew design with big bolts $600 shipped
sp short runner intake power coated black with fuel rail $600 shipped

i take paypal too

[xtremvw3]

Im someone decides to make some power in a mk4 02j i have 2 sets of DSS stg 5 for sale 1 set is brand new the other maybe 10 pass since refresh from DSS 1900$ for Both sets shipped

[carbide01]

Weldon 2025 Fuel Pump - great condition, $375 1400hp rated
Weldon 2015 Fuel Pump - great shape $275 1000hp rated
Weldon 2040 FPR, carb spring in it, 15psi gauge $130.

Call/text Andrew 303-990-3612. Local pickup in Denver welcome, but can ship as well!

[Tmsracing37]

Up for sale is a lightly used Comp Turbo ball bearing CT4-6262 with a T3 .82 ar turbine housing. The turbo has about 500 miles on it, but was sent off to Comp Turbo for a rebuild do to a leaking seal. The turbo has not been installed since the rebuild, but has been test by Comp to insure no leaks. Will include the oil restrictor.
Asking 1300.00

[killa]

So I'm starting to part **** out, 4cyl 02A for sale with a Peloquin diff installed:
http://forums.vwvortex.com/showthrea...-Peloquin-diff

Thanks

[Throttles]

WANTED: Hi guys I’m looking for a set of 13x8”+ used wheels for the front and 15x4 rear @ a GOOD price. Preferably with tyres. 24.5x9, 24x8 or 23x8 full sleeks.

I see xtremvw3 has a nice 13x10 set. My bolls are itching for them, but they are way out of my budget

Seller must also be willing to ship to South Africa

These are the best I have seen Weld Magnum drag wheels

[carbide01]

Over $400 with shipping new, $350 to your door. Brand new, never used. 303-990-3612

[charlie hayes]

12v Turbo Part Out:

Everything is brand new or in very good condition.

Precision 6262 T4 .68Ar Journal Bearing-Never been used. (just test fitted)-$800
Precision 750hp Intercooler-$300
ID1000s-$450
Lugtronic ECU with 1000cc E85 basemap on it w/or without un terminated wiring harness- Call
o2a w/peloquin (brand new) zero miles-$1000+shipping obo
2xBosch 044 pumps (brand new)-$400 for both
Tial 50mm (polished)- $200
Precision 39mm wastegate- $200
Clutchmasters 6 puck clutch (brand new)-$300
Schimmel Performance Intake w/ elbow- Make offer
-10AN Fuel rail-$50
Fuelab Fuel Pressure regulator-$100
Rebello Built 2.9L 12v Long Block W/ 8.5:1 JE's, Eagle rods, DSR 256 cams. Zero Miles since build-$2500 plus shipping


I don't come over here much so these are the best places to reach me. Pics available via Email or text.

Cell
925 260 4148
Email
Charlie_hayes123@yahoo.com

[turbo mike]

bought these from bahn brenner over a year ago, never used them. they are 5x100 wheels. 13x8 and 15x4.5. rears have tires that are in great shape, fronts i will sell with or without tires.

tire options for upfront:

24.5x9x13 hoosiers in ok shape. i dont know how great these are. when i purchased them i was told they had made some passes on them, but not many. they do look decent though.

23x8x13 M&H tires. bought these from a regular on here, root beer maybe. its been a while. these seem to still be in great shape.

I will sell the wheels as a package only, with rears coming with tires. The fronts will be tireless unless you are interested in the tires. Asking $750 for the front and rear wheels, no front tires. with tires, make me an offer. id prefer a local sale, and am willing to drive to meet up for the sale. shipping is at buyers expense. make me some offers, located in randolph nj 07869.





m&h tires

[turbodub]

used precision 6768 ball bearing .96t4 $1300 obo
switched to a 72mm so this is no longer needed. comp blade has some small nicks but nothing bad. turbo has recently gone 170+ at wcf.

[12vt60rrado]

what's the back space on them?

bought these from bahn brenner over a year ago, never used them. they are 5x100 wheels. 13x8 and 15x4.5. rears have tires that are in great shape, fronts i will sell with or without tires.

tire options for upfront:

24.5x9x13 hoosiers in ok shape. i dont know how great these are. when i purchased them i was told they had made some passes on them, but not many. they do look decent though.

23x8x13 M&H tires. bought these from a regular on here, root beer maybe. its been a while. these seem to still be in great shape.

I will sell the wheels as a package only, with rears coming with tires. The fronts will be tireless unless you are interested in the tires. Asking $750 for the front and rear wheels, no front tires. with tires, make me an offer. id prefer a local sale, and am willing to drive to meet up for the sale. shipping is at buyers expense. make me some offers, located in randolph nj 07869.





m&h tires

[turbo mike]

I believe 5" backspacing. Id have to check in the morning. They were on a vw when bahn brenner ran them.