** GruvenParts.com Has Custom Billet Passat Parts !!

[GruvenParts.com]

CNC Pressed MSD Coil Pack Brackets for MK3 and MK4 VR6 !

Use this CNC formed, powder coated Aerospace grade aluminum bracket to mount your new MSD 8224 coils on MK3 or MK4 VR6 engines. We all know how poorly the OEM Beru units hold up - so get serious about your VR6 ignition and step up to MSD! Leave the cheaply made, overpriced Beru coils for the competition!

[GruvenParts.com]

Billet VR6 Crack Pipes for ALL VR6 Engines Corrado thru R32!

DOES NOT COME WITH CHEAP THIN WALL TAPPED FITTINGS LIKE OTHER LESSER PIPES !!

12V and 24V VR6 Coolant Pipes aka Crack Pipes

Ours are completely tig welded by our licensed commercial jet aircraft repair facility! We were the 1st to build this part and its what started us off! If you have a billet crack pipe in your VR6, chances are it was made by http://www.GruvenParts.com. Hand crafted in our Aerospace shop using O-rings from the Boeing 777, proven by many hours of track time, it's the highest quality crack pipe you can buy. It's on all of our track cars and has withstood countless hours of track abuse! The 12V version replaces OEM p/n 021-121-050C (021121050C) and the 24V version replaces OEM p/n 022-121-050 (022121050).

[max302]

I'm looking into a PS and AC delete in my VR wagon. Would you be willing to do a discount for a PS/AC delete pulley kit without the PS pulley like you are doing for the whole set?

[GruvenParts.com]

Sure thats fine, please email me direct and let us know what all you need so we can quote it out. The pulley kits have a larger discount when all pulleys are ordered but we can still work something out Im sure

Paul@GruvenParts.com

www.GruvenParts.com

[GruvenParts.com]

Billet 12V VR6 Drive Belt Pulleys - All 12V VR6

GruvenParts.com offers a complete set of ultra sleek lightweight 12V VR6 power pulleys. These include lightweight billet crank, power steering, water pump, tensioner, and alternator pulleys for your 12V VR6 engine. These pulleys are precision CNC'd from aircraft grade billet aluminum and reduce the rotating mass by a whopping 8.5 lbs! All pulleys ARE NORMAL DRIVE (NOT UNDER-DRIVE). These pulleys will not change the speed of the supercharger and will not void any supercharger warranties.

Buy them as a set and save!

These pulleys replace the following OEM part numbers :

Crank Pulley : 021-105-243 (021105243)
Tensioner Pulley: 021-145-299 (021145299)
Water Pump Pulley: 021-121-031A (021121031A)
Alternator Pulley: 021-903-119 (021903119)
Power Steering Pulley : 021-145-255 (021145255)

[GruvenParts.com]

GruvenParts.com builds bulletproof TIG welded Y Pipes to replace the OEM plastic in your VW coolant system!


Billet Upper Radiator Hose Y Pipes

PLEASE NOTE : This part is professionally TIG welded! There are no junk tapped threads into thin wall aluminum like the lesser versions offered by unscrupulous rip off artists. And its warranted for life!

An absolute MUST HAVE for all MK3 VR6 owners and MK4 New Beetle owners. The upper radiator hose on these models is quite a pricey item from the dealer – usually about $100. The most documented cause of replacement on this hose is due to the plastic Y fitting which connects the 3 short hose pieces. The VW Y pipe cannot be bought separately, and is not suited for the high temperatures under the hood. Hell, its plastic – what did you expect?!

Dont buy the OEM plastic part when you can buy this BILLET ALUMINUM TIG Welded replacement part for half the price!

If you need a custom water temp sensor port welded on, please let us know. We are happy to perform customization on ANY of our products.

Replaces the following OEM P/N :

1H0-122-101E (1H0122101E) – MK3 Golf/Jetta VR6
3A0-122-101E (3A0122101E) – VR6 Passat
1C0-121-438A (1C0121438A) – New Beetle

[GruvenParts.com]

Billet 12V VR6 Drive Belt Pulleys - All 12V VR6

GruvenParts.com offers a complete set of ultra sleek lightweight 12V VR6 power pulleys. These include lightweight billet crank, power steering, water pump, tensioner, and alternator pulleys for your 12V VR6 engine. These pulleys are precision CNC'd from aircraft grade billet aluminum and reduce the rotating mass by a whopping 8.5 lbs! All pulleys ARE NORMAL DRIVE (NOT UNDER-DRIVE). These pulleys will not change the speed of the supercharger and will not void any supercharger warranties.

Buy them as a set and save!

These pulleys replace the following OEM part numbers :

Crank Pulley : 021-105-243 (021105243)
Tensioner Pulley: 021-145-299 (021145299)
Water Pump Pulley: 021-121-031A (021121031A)
Alternator Pulley: 021-903-119 (021903119)
Power Steering Pulley : 021-145-255 (021145255)

[GruvenParts.com]

www.GruvenParts.com

[GruvenParts.com]

Billet 12V VR6 Drive Belt Pulleys - All 12V VR6

GruvenParts.com offers a complete set of ultra sleek lightweight 12V VR6 power pulleys. These include lightweight billet crank, power steering, water pump, tensioner, and alternator pulleys for your 12V VR6 engine. These pulleys are precision CNC'd from aircraft grade billet aluminum and reduce the rotating mass by a whopping 8.5 lbs! All pulleys ARE NORMAL DRIVE (NOT UNDER-DRIVE). These pulleys will not change the speed of the supercharger and will not void any supercharger warranties.

Buy them as a set and save!

These pulleys replace the following OEM part numbers :

Crank Pulley : 021-105-243 (021105243)
Tensioner Pulley: 021-145-299 (021145299)
Water Pump Pulley: 021-121-031A (021121031A)
Alternator Pulley: 021-903-119 (021903119)
Power Steering Pulley : 021-145-255 (021145255)

[GruvenParts.com]

These parts are in stock, ready to ship!!

Billet VR6 Crack Pipes for ALL VR6 Engines Corrado thru R32!

DOES NOT COME WITH CHEAP THIN WALL TAPPED FITTINGS LIKE OTHER LESSER PIPES !!

12V and 24V VR6 Coolant Pipes aka Crack Pipes

Ours are completely tig welded by our licensed commercial jet aircraft repair facility! We were the 1st to build this part and its what started us off! If you have a billet crack pipe in your VR6, chances are it was made by http://www.GruvenParts.com. Hand crafted in our Aerospace shop using O-rings from the Boeing 777, proven by many hours of track time, it's the highest quality crack pipe you can buy. It's on all of our track cars and has withstood countless hours of track abuse! The 12V version replaces OEM p/n 021-121-050C (021121050C) and the 24V version replaces OEM p/n 022-121-050 (022121050).

[GruvenParts.com]

These are in stock, ready to go

CNC Pressed MSD Coil Pack Brackets for MK3 and MK4 VR6 !

Use this CNC formed, powder coated Aerospace grade aluminum bracket to mount your new MSD 8224 coils on MK3 or MK4 VR6 engines. We all know how poorly the OEM Beru units hold up - so get serious about your VR6 ignition and step up to MSD! Leave the cheaply made, overpriced Beru coils for the competition!

[GruvenParts.com]

Nice day to call in sick and work on your car

www.GruvenParts.com

[GruvenParts.com]

MK2 / MK3 Billet Fuel Line Support Brackets

Billet fuel line support brackets (set of 2) to replace the weak plastic clips that are probably long gone on your MK2 and MK3 VR6. Ours are CNC'd from billet aluminum to perfectly match the size and shape of your VR6 fuel lines. Mount directly to the head in place of existing plastic supports and install with supplied aerospace grade stainless fasteners. Dont leave your VR6 fuel lines loose and rubbing against hot engine components! These will take more abuse than you can dish out, guaranteed!!

Can be chrome plated for those seeking even more engine bay bling.

Fits all MK2 and MK3 VR6 - Jetta, GTI, Passat, and Corrado. Includes stainless bracket hardware, re-use existing 10mm nuts to bolt to head. Brackets replace OEM P/N 021-133-827 (021133827) Bracket and P/N 021-133-687A (021133687A) clip.

[GruvenParts.com]

GruvenParts.com

[GruvenParts.com]

Billet VR6 Crack Pipes for ALL VR6 Engines Corrado thru R32!

MACHINED FROM 6061-T651 ALUMINUM TO EXACTLY MATCH OEM PIPE DIMENSIONS - OURS DOES NOT COME WITH CHEAP THIN WALLED TAPPED FITTINGS LIKE OTHER LESSER PIPES !!

12V and 24V VR6 Coolant Pipes aka Crack Pipes

GruvenParts.com was the 1st to build this part and it’s what started us off! We manufacture this pipe EXACTLY to match the OEM part shape so there is NEVER a fitment issue. Be careful when considering other billet pipes which do not match the exact shape of the OEM pipe. The fitment of this part is tricky and the shape MUST BE IDENTICAL to the OEM part to ensure correct alignment between the water pump and thermo housing.

If you have a billet crack pipe in your VR6, chances are it was made by us. Hand crafted in our Aerospace shop using O-rings from the Boeing 777, proven by many hours of track time, it's the highest quality crack pipe you can buy. It's on all of our track cars and has withstood countless hours of track abuse! Our pipe has a modular design which allows you to plug the oil cooler feed line with a ¼ NPT plug if installing an external oil cooler. Ours can also be ordered with a chrome plated drain valve for quick and clean coolant flushes. The pipe can also be ordered with a brilliant chrome finish for those seeking the ultimate engine bay bling!

If you dont want to do this job again, buy the LIFETIME WARRANTED GruvenParts.com billet CrackPipe !

Make sure to see our website for the complete installation DIY

The 12V version replaces OEM p/n 021-121-050C (021121050C) found in 12V VR6 : VW Corrado, Golf, Jetta, Passat, and Eurovan.
The 24V version replaces OEM p/n 022-121-050 (022121050) found in 24V VR6 : VW R32, Golf, Jetta, Eurovan, EOS, Audi : 3.2L V6 TT and A3

[GruvenParts.com]

www.GruvenParts.com

[GruvenParts.com]

Everything is in stock ready to ship

www.GruvenParts.com

[GruvenParts.com]

Please make sure to like us out on Facebook

--

http://www.facebook.com/GruvenParts

--

Its a great way to keep up with all that we are developing, and request more items to be developed




www.GruvenParts.com

[x9t]

hello,

I purchased two dips sticks.. one for my 2.0T Passat B6 which works great but the one for my 1996 VR6 (12V AAA) Passat does not work.. it is very difficult to get a accurate reading..

Again for the 2.0T FSI, it works great but the VR6.. just cant read it.

Has any other B4 VR6 owner installed one? Did the passat VR6 have something different.. I original dip stick is orange.. I know some VR6 had Red.. would that matter?

JT

[GruvenParts.com]

JT, can you be more specific here - hard to read, how ? Please let me know your concerns so we can address them. You can always call, email, or post here. Calling or emailing is faster but we'll respond once we have a better idea of what you mean.

Thanks and we do want to make sure you are satisfied with your purchase from us!

[GruvenParts.com]

VR6 Billet Aux Water Pump Bracket – All VR6

This part replaces the useless rubber donut OEM P/N 035-959-209E (035959209E) that does a poor job supporting your PRICEY auxiliary water pump, and related PRICEY hoses. The OEM rubber donut allows the weight of the pump and hoses to sag, causing stress which can lead to pump and hose failure. Our billet version is the way VW should of designed it to begin with and locks the pump and hoses tight! On or off track, this part will secure the aux pump and prevent pump and hose failure.

Replaces OEM P/N 035-959-209E (035959209E) common to the following vehicles -

Corrado - all VR6
Eos - 2007 + 3.2L VR6
Eurovan - All VR6
R32 - 2004
Golf, Jetta, Jetta Wagon - 1993-2007 All VR6
Passat - 1992-2005 - All VR6 and V8
Phaeton - 2004-2007 6L V12
Touareg - 2003 on 3.2L VR6

[GruvenParts.com]

GruvenParts.com builds bulletproof TIG welded Y Pipes to replace the OEM plastic in your VW coolant system!


Billet Upper Radiator Hose Y Pipes

PLEASE NOTE : This part is professionally TIG welded! There are no junk tapped threads into thin wall aluminum like the lesser versions offered by unscrupulous rip off artists. And its warranted for life!

An absolute MUST HAVE for all MK3 VR6 owners and MK4 New Beetle owners. The upper radiator hose on these models is quite a pricey item from the dealer – usually about $100. The most documented cause of replacement on this hose is due to the plastic Y fitting which connects the 3 short hose pieces. The VW Y pipe cannot be bought separately, and is not suited for the high temperatures under the hood. Hell, its plastic – what did you expect?!

Dont buy the OEM plastic part when you can buy this BILLET ALUMINUM TIG Welded replacement part for half the price!

If you need a custom water temp sensor port welded on, please let us know. We are happy to perform customization on ANY of our products.

Replaces the following OEM P/N :

1H0-122-101E (1H0122101E) – MK3 Golf/Jetta VR6
3A0-122-101E (3A0122101E) – VR6 Passat
1C0-121-438A (1C0121438A) – New Beetle

[x9t]

JT, can you be more specific here - hard to read, how ? Please let me know your concerns so we can address them. You can always call, email, or post here. Calling or emailing is faster but we'll respond once we have a better idea of what you mean.

Thanks and we do want to make sure you are satisfied with your purchase from us!

When I pull out the dip stick.. its covered in oil.. all of it.. the little indicator but when I install the OEM.. it show the correct/acurate level. I know it sounds dumb.. but thats the only way I can discribe it.

Once again, on the 2.0T dip stick is perfect. I made sure they are all the same lenght.. so either

A. The Passat VR6 has something different from the GTI VR6 which is what you guys used to design it.

B. I received a defective product.. but it doesnt seem like it.

C. Maybe my passat has some unknow damage to the dip stick tunnel.. which may cause it to read incorrectly...

I am the only B4 Passat owner with this dip stick?


I plan to pull the engine next month.. I was going to try to figure it out then... as to why it always miss reads the level. I would take pictures but I dont know if they can capture the issue... and I been lazy because I am focusing on my 2.0T. I am not in a hurry to fix it and I plan to follow up.

JT

[GruvenParts.com]

JT,

Can you measure length of your OEM dip, from where it seats at the top of the tube all the way to the beginning and end of oil indicator section of OEM dipstick ?

I will compare this to the VR6 dipstick you were sent for AAA VR6. We will figure out what is going on, it should be spot on. If you want to continue this on email, I can respond faster.

Thanks for bringing this to my attention .

[GruvenParts.com]

Billet 12V VR6 Drive Belt Pulleys - All 12V VR6

GruvenParts.com offers a complete set of ultra sleek lightweight 12V VR6 power pulleys. These include lightweight billet crank, power steering, water pump, tensioner, and alternator pulleys for your 12V VR6 engine. These pulleys are precision CNC'd from aircraft grade billet aluminum and reduce the rotating mass by a whopping 8.5 lbs! All pulleys ARE NORMAL DRIVE (NOT UNDER-DRIVE). These pulleys will not change the speed of the supercharger and will not void any supercharger warranties.

Buy them as a set and save!

These pulleys replace the following OEM part numbers :

Crank Pulley : 021-105-243 (021105243)
Tensioner Pulley: 021-145-299 (021145299)
Water Pump Pulley: 021-121-031A (021121031A)
Alternator Pulley: 021-903-119 (021903119)
Power Steering Pulley : 021-145-255 (021145255)

[GruvenParts.com]

www.GruvenParts.com

[GruvenParts.com]

Billet 12V VR6 Drive Belt Pulleys - All 12V VR6

GruvenParts.com offers a complete set of ultra sleek lightweight 12V VR6 power pulleys. These include lightweight billet crank, power steering, water pump, tensioner, and alternator pulleys for your 12V VR6 engine. These pulleys are precision CNC'd from aircraft grade billet aluminum and reduce the rotating mass by a whopping 8.5 lbs! All pulleys ARE NORMAL DRIVE (NOT UNDER-DRIVE). These pulleys will not change the speed of the supercharger and will not void any supercharger warranties.

Buy them as a set and save!

These pulleys replace the following OEM part numbers :

Crank Pulley : 021-105-243 (021105243)
Tensioner Pulley: 021-145-299 (021145299)
Water Pump Pulley: 021-121-031A (021121031A)
Alternator Pulley: 021-903-119 (021903119)
Power Steering Pulley : 021-145-255 (021145255)

[GruvenParts.com]

Post Christmas bump

www.GruvenParts.com

[GruvenParts.com]

GruvenParts.com builds bulletproof TIG welded Y Pipes to replace the OEM plastic in your VW coolant system!


Billet Upper Radiator Hose Y Pipes

PLEASE NOTE : This part is professionally TIG welded! There are no junk tapped threads into thin wall aluminum like the lesser versions offered by unscrupulous rip off artists. And its warranted for life!

An absolute MUST HAVE for all MK3 VR6 owners and MK4 New Beetle owners. The upper radiator hose on these models is quite a pricey item from the dealer – usually about $100. The most documented cause of replacement on this hose is due to the plastic Y fitting which connects the 3 short hose pieces. The VW Y pipe cannot be bought separately, and is not suited for the high temperatures under the hood. Hell, its plastic – what did you expect?!

Dont buy the OEM plastic part when you can buy this BILLET ALUMINUM TIG Welded replacement part for half the price!

If you need a custom water temp sensor port welded on, please let us know. We are happy to perform customization on ANY of our products.

Replaces the following OEM P/N :

1H0-122-101E (1H0122101E) – MK3 Golf/Jetta VR6
3A0-122-101E (3A0122101E) – VR6 Passat
1C0-121-438A (1C0121438A) – New Beetle

[GruvenParts.com]

bump for the best products for your ride


www.GruvenParts.com

[GruvenParts.com]

Billet VW/Audi VR6/V6/V8 Oil Filter Housings !

Precision Machined Aluminum Oil Filter Housings For VW And Audi VR6/V6/V8 Engines !


This one was worth the wait, folks! Never, but NEVER break a flimsy plastic oil filter housing again. Or deal with the unsightly leaks created by the cheaply made (yet expensive) plastic OEM housing cracking and deflecting. We made this one the way VW and Audi should have – from A SOLID BLOCK OF ALUMINUM, by God!


First, we start with a massive chunk of Aircraft Grade 6061-T6511 Aluminum. The section is delicately placed on one of our special CNC machining centers and precision cut to EXACTLY match the OEM plastic housing. The metal gods (well, in this case, one of our highly talented CNC programmers) has programmed elaborate steps for the very time consuming and expensive operation of profiling the special buttress threads into the housing using the exact DIN spec thread cutting tool required for a perfect seal. It simply doesn’t get better than this!

We also provide a proper threaded drain plug of the same size as your oil pan plug (use just 1 19mm socket for both!). Rather than some useless internal soft hex plug which easily strips, ours is a genuine Audi plug made from steel with an honest 19mm external hex. The plug comes with a contained sealing washer as well. And yes, we also provide USEABLE 36mm hex flats so you can easily remove the housing with a standard 36mm socket. Imagine that : You can simply drain the housing using its proper drain plug bolt that wont round off, and remove the housing using a proper 36mm socket that also wont round off. This could possibly make changing your oil fun again!


This product is intended to replace VW/Audi Part Numbers 021-115-433A (021115433A) and 021-115-433B (021115433B) housings. Please check the OEM part number of your oil filter housing before ordering. You can do this easily by calling your dealer and giving them your VIN #. It will fit the following vehicles :

VW Corrado (1992-1995 w/AAA VR6 engine)
VW Golf and Jetta/Wagon (1993-2006 w/AAA and AFP VR6 engines)
VW Passat (1992-1997 w/AAA VR6 engine)
VW Touareg (2003-2007 w/3.2 and 3.6 V6 engines)
VW Eurovan (1996-2004 w/AES V6 engine)

Audi A8/S8 (2000-2003 w/4.2L AUX V8 engine)
Audi Q7 (2007-2009 w/3.6L BHK V6 engine)

Special Note At The End :

Use oil filter part number 021-115-562 (021115562) or equivalent with our metal housing. If your parts department requires a vehicle type, tell them “1995 VW Golf GTI VR6”. This is the older, vastly superior cartridge filter with the metal end caps. VW, in their infinite cost savings wisdom, superseded it with a cheaper, cardboard end filter (021-115-562A). Please make sure to order filter 021-115-562 oil filter (or equivalent) as it is the superior filter for these engines, and will fit correctly with this housing. You can buy it from us using the drop down menu on the product page, or at any dealer or trusted auto parts store.

[GruvenParts.com]

Billet VW/Audi VR6/V6/V8 Oil Filter Housings - Installed !

Precision Machined Aluminum Oil Filter Housings For VW And Audi VR6/V6/V8 Engines !

[GruvenParts.com]

Billet VW/Audi VR6/V6/V8 Oil Filter Housings - Installed !

Precision Machined Aluminum Oil Filter Housings For VW And Audi VR6/V6/V8 Engines !

[GruvenParts.com]

Billet 12V VR6 Drive Belt Pulleys - All 12V VR6

GruvenParts.com offers a complete set of ultra sleek lightweight 12V VR6 power pulleys. These include lightweight billet crank, power steering, water pump, tensioner, and alternator pulleys for your 12V VR6 engine. These pulleys are precision CNC'd from aircraft grade billet aluminum and reduce the rotating mass by a whopping 8.5 lbs! All pulleys ARE NORMAL DRIVE (NOT UNDER-DRIVE). These pulleys will not change the speed of the supercharger and will not void any supercharger warranties.

Buy them as a set and save!

These pulleys replace the following OEM part numbers :

Crank Pulley : 021-105-243 (021105243)
Tensioner Pulley: 021-145-299 (021145299)
Water Pump Pulley: 021-121-031A (021121031A)
Alternator Pulley: 021-903-119 (021903119)
Power Steering Pulley : 021-145-255 (021145255)

[GruvenParts.com]

Billet VR6 Crack Pipes for ALL VR6 Engines Corrado thru R32!

MACHINED FROM 6061-T651 ALUMINUM TO EXACTLY MATCH OEM PIPE DIMENSIONS - OURS DOES NOT COME WITH CHEAP THIN WALLED TAPPED FITTINGS LIKE OTHER LESSER PIPES !!

12V and 24V VR6 Coolant Pipes aka Crack Pipes

GruvenParts.com was the 1st to build this part and it’s what started us off! We manufacture this pipe EXACTLY to match the OEM part shape so there is NEVER a fitment issue. Be careful when considering other billet pipes which do not match the exact shape of the OEM pipe. The fitment of this part is tricky and the shape MUST BE IDENTICAL to the OEM part to ensure correct alignment between the water pump and thermo housing.

If you have a billet crack pipe in your VR6, chances are it was made by us. Hand crafted in our Aerospace shop using O-rings from the Boeing 777, proven by many hours of track time, it's the highest quality crack pipe you can buy. It's on all of our track cars and has withstood countless hours of track abuse! Our pipe has a modular design which allows you to plug the oil cooler feed line with a ¼ NPT plug if installing an external oil cooler. Ours can also be ordered with a chrome plated drain valve for quick and clean coolant flushes. The pipe can also be ordered with a brilliant chrome finish for those seeking the ultimate engine bay bling!

If you dont want to do this job again, buy the LIFETIME WARRANTED GruvenParts.com billet CrackPipe !

Make sure to see our website for the complete installation DIY

The 12V version replaces OEM p/n 021-121-050C (021121050C) found in 12V VR6 : VW Corrado, Golf, Jetta, Passat, and Eurovan.
The 24V version replaces OEM p/n 022-121-050 (022121050) found in 24V VR6 : VW R32, Golf, Jetta, Eurovan, EOS, Audi : 3.2L V6 TT and A3