***Integrated Engineering brings you Ferrea valvetrain!!***

**Cassidy@Integrated** · 05-12-2010 02:43 PM

INTEGRATED ENGINEERING is proud to offer the full line of Ferrea valvetrain! We now have our shelves packed full of Ferrea products for most VW/Audi applications!

Ferrea is one of the most known names when it comes to valvetrain. That is because they make the finest quality valvetrain available! Ferrea valvetrain is trusted by the top racing teams around the world. Formula 1, Nascar, indy, drag racing, and road racing teams all utilize Ferrea valvetrain in the world's highest performing engines. It is definitely a notch above the rest.

You may ask what SUPER ALLOY is. The Ferrea Super Alloy is a high temperature resistant alloy, great for all applications, especially turbo and nitrous applications. These valves have a very high tolerance for high exhaust gas temperatures. It was specifically designed for high temperature abuse!

If you are building a high horsepower/high revving engine, upgraded valvetrain is a MUST. Ferrea is the answer to your head build!

Click red links below to purchase!

Ferrea valvetrain available for 1.8T:

Exhaust Valve set

Intake Valve set

Standard size $316.53
+1MM Oversize $316.53

Valve spring/Titanium retainer set

Valve spring/Titanium retainer set $797.70

Pictures to come soon!

**Cassidy@Integrated** · 05-19-2010 07:48 PM

Top-notch valvetrain, in stock!

**Cassidy@Integrated** · 05-21-2010 12:55 PM

We have the full line of 1.8T Ferrea valvetrain IN STOCK!

**Cassidy@Integrated** · 05-26-2010 04:58 PM

Take your build to the next level!

**Cassidy@Integrated** · 06-17-2010 05:58 PM

**Cassidy@Integrated** · 06-21-2010 01:49 PM

Only the best for your 1.8T

**Dave@integrated** · 06-28-2010 01:39 PM

**Cassidy@Integrated** · 07-08-2010 02:12 PM

**Cassidy@Integrated** · 07-16-2010 01:34 PM

**Cassidy@Integrated** · 07-19-2010 03:12 PM

These are IN STOCK!

**Cassidy@Integrated** · 07-23-2010 05:13 PM

Originally Posted by Cassidy@Integrated

These are IN STOCK!

For all applications.

**Cassidy@Integrated** · 07-27-2010 06:53 PM

Just restocked.

**Cassidy@Integrated** · 07-29-2010 01:22 PM

Upgraded valvetrain is an easy way to rev higher, safely.

**Cassidy@Integrated** · 08-10-2010 01:18 PM

**Cassidy@Integrated** · 08-25-2010 04:31 PM

**Cassidy@Integrated** · 09-02-2010 05:35 PM

Bump

**Cassidy@Integrated** · 10-08-2010 02:20 PM

**velocity196** · 10-08-2010 03:05 PM

unlike the supertechs, are these springs good for over than 9k?

**Dave@integrated** · 10-14-2010 02:19 AM

Honestly, we have seen both over 9k, but yes, Ferrea can definitely handle it.

**velocity196** · 10-14-2010 07:37 AM

Originally Posted by Dave@integrated

Honestly, we have seen both over 9k, but yes, Ferrea can definitely handle it.

The only one I know pushing supertechs is mike but I forgot what he's reving. I just remember Pete telling me to stay under 9. Not sure what the final limit will be on my next block but it'll start out under 9k. Stupid me, didn't get the bolt upgrade

. So if I do go more both the rods and head need to be reworked. Grrrrrrr, it's never going to stop is it lol? Did I mention I just bought a alh crank lmfao!!

**Dave@integrated** · 10-17-2010 04:32 PM

Marc from Autoxtrem also runs supertech. I'd try to convince anyone over 9k to run Ferrea as well but not everyone is willing to pay for Ferrea.

**Cassidy@Integrated** · 11-02-2010 12:34 PM

**Dave@integrated** · 11-12-2010 07:41 PM

**carbide01** · 11-12-2010 10:10 PM

I got my valvetrain from IE - thanks guys

**Dave@integrated** · 11-20-2010 05:35 PM

Thanks again Andrew. Plenty more in stock...

**Cassidy@Integrated** · 11-23-2010 12:51 AM

In stock.

**Cassidy@Integrated** · 12-01-2010 03:58 PM

**Cassidy@Integrated** · 12-03-2010 02:48 PM

Check out our Christmas giveaway! Check us out on Facebook!

**Cassidy@Integrated** · 12-10-2010 05:42 PM

**Cassidy@Integrated** · 12-30-2010 01:37 PM

**Cassidy@Integrated** · 02-04-2011 07:49 PM

Bump

**derekb727** · 02-09-2011 06:57 AM

Do you all do an install? Price? Do you all do any type of head work?

**Dave@integrated** · 04-06-2011 07:51 PM

We could supply you with an assembled head. As for porting, we are currently working on our own ported heads that with any luck will be done by early summer. We do not do any manual porting however.

We also have some really nice spring and retainer kits in the works as well.

**derekb727** · 04-08-2011 05:15 PM

Originally Posted by Dave@integrated

We could supply you with an assembled head. As for porting, we are currently working on our own ported heads that with any luck will be done by early summer. We do not do any manual porting however.

We also have some really nice spring and retainer kits in the works as well.

what would a fully built assembled (no port work) AEB head run me? (cams/valves/springs/retainers/valvejob/etc?)
i already have an AEB head, would that work as a core refund?

**03redgti** · 05-04-2011 02:57 AM

Originally Posted by derekb727

what would a fully built assembled (no port work) AEB head run me? (cams/valves/springs/retainers/valvejob/etc?)
i already have an AEB head, would that work as a core refund?

What he said ..with the new street strip cams that r coming out

VWVortex

Thread: Integrated Engineering brings you Ferrea valvetrain!!

Thread Tools

Search Thread

Display