Nice !
We have both dipstick and tube in stock, you need them !
Email me when you can.
Paul@GruvenParts.com
www.GruvenParts.com
+ Reply to Thread
Results 71 to 105 of 106
-
Member
- Join Date
- May 12th, 2009
- Location
- Ohio
- Posts
- 5,303
- Vehicles
- mkv
10-03-2011 11:22 AM
#71
alternator pulley and crank pulley
want to hook me up with the dipstick and dipstick tube?MR Eurowerks air ride sales/installation, Watercooled Ind dealer, OEM parts
Gengstout
B.H.C
BagRiders
Instagram @mikeyrobles
-
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
10-17-2011 11:21 AM
#72
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
10-27-2011 10:37 AM
#73
ABA / Corrado G60 / MK2 Billet Dipstick
www.GruvenParts.com is proud to release these gorgeous Billet Dipsticks to replace both OEM part number 027-115-611C (027115611C) and 051-115-611B (051115611B). Our billet dipstick is CNC’d from a solid block of 6061-T651 aluminum with a stainless steel cable permanently attached. The cable end has a flitting with hash marks to signify oil level min and max.
As an added bonus, this part is made to perfectly fit our Billet Dipstick Funnels and can be ordered as a set to save! If you are ordering the billet funnel with the billet dipstick, please ensure your car uses dipstick funnel OEM P/N 053-103-663 (053103663).
This billet dipstick replaces both OEM part number 027-115-611C (027115611C) and 051-115-611B (051115611B) and fits the following vehicles :
1993-1999 Jetta/Golf/Passat/Cabrio w.2.0 ABA engine
1990-1992 Corrado G60 1.8L
1985-1992 Jetta/Golf/Passat w/1.6L and 1.8L engines
Don’t see your car listed here? Don’t worry! We have many more of these billet dipsticks coming for nearly all makes / models. Visit www.GruvenParts.com for the latest.
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
11-14-2011 12:43 PM
#74
MKIII 2.0 ABA Billet Lightweight Crank, Tensioner, and Alternator Pulleys – NON-UNDERDRIVE!
www.GruvenParts.com offers precision CNC billet lightweight (and Non-Under-driven) crank, tensioner, and alternator pulleys for the ABA 2.0 engines. The pulley set reduces engine rotating mass by over 4 lbs to help you squeeze out every last bit of power, without the problems associated with under-driving components. Our billet tensioner comes ready to install with a 20K rpm bearing to replace the cheap OEM plastic pulley. The crank pulley is a slick dual design which incorporates the power steering v-belt pulley with a light mounting flange (new shorter grade 12.9 attach bolts included). Finally, the alternator pulley is a paper light version of the OEM steel pulley to minimize parasitic losses.
Check out www.GruvenParts.com for all the billet goodies!
These parts replace the following OEM part numbers :
037-105-243A (037105243A) ABA crank pulley
037-105-253 (037105253) ABA power steering pulley
028-145-278E (028145278E) ABA serpentine tensioner pulley (also fits MK3 TDI)
028-903-119F (028903119F) and 028-903-119AA (028903119AA)ABA alternator pulley
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
12-06-2011 12:24 PM
#75
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
01-13-2012 09:47 AM
#76
You need our ABA billet dipstick man !!!
Originally Posted by Minor_Threat
alternator pulley and crank pulley
want to hook me up with the dipstick and dipstick tube?
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
02-13-2012 04:08 PM
#77
Up for billet parts !
Originally Posted by GruvenParts.com
MKIII 2.0 ABA Billet Lightweight Crank, Tensioner, and Alternator Pulleys – NON-UNDERDRIVE!
www.GruvenParts.com offers precision CNC billet lightweight (and Non-Under-driven) crank, tensioner, and alternator pulleys for the ABA 2.0 engines. The pulley set reduces engine rotating mass by over 4 lbs to help you squeeze out every last bit of power, without the problems associated with under-driving components. Our billet tensioner comes ready to install with a 20K rpm SKF bearing to replace the cheap OEM plastic pulley. The crank pulley is a slick dual design which incorporates the power steering v-belt pulley with a light mounting flange (new shorter grade 12.9 attach bolts included). Finally, the alternator pulley is a paper light version of the OEM steel pulley to minimize parasitic losses.
Check out www.GruvenParts.com for all the billet goodies!
These parts replace the following OEM part numbers :
037-105-243A (037105243A) ABA crank pulley
037-105-253 (037105253) ABA power steering pulley
028-145-278E (028145278E) ABA serpentine tensioner pulley (also fits MK3 TDI)
021-903-119 (021903119) ABA alternator pulley
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
04-23-2012 02:08 PM
#80
Billet Dipstick Funnel
Finally, a replacement for the orange plastic dipstick funnel !
Our funnel is made from 6061-T6 billet aluminum and neatly replaces the cheap brittle orange dipstick funnel we have all come to hate. Choose from as machined finish or highly polished finish.
This part replaces OEM part number 053-103-663 (053103663) on the following vehicles:
Audi - 80, B5 A4 1.8T – all 4 cylinder
VW – MK2 Golf, Jetta, Scirocco (all including 16V), Corrado G60 (NOT VR6), MK3 ABA’s, Eurovan T4, B3, B4, B5 Passat 1.8T and 2.0
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
04-23-2012 02:09 PM
#81
Bump for nice looking dipsticks and funnels
Originally Posted by GruvenParts.com
ABA / Corrado G60 / MK2 Billet Dipstick
www.GruvenParts.com is proud to release these gorgeous Billet Dipsticks to replace both OEM part number 027-115-611C (027115611C) and 051-115-611B (051115611B). Our billet dipstick is CNC’d from a solid block of 6061-T651 aluminum with a stainless steel cable permanently attached. The cable end has a flitting with hash marks to signify oil level min and max.
As an added bonus, this part is made to perfectly fit our Billet Dipstick Funnels and can be ordered as a set to save! If you are ordering the billet funnel with the billet dipstick, please ensure your car uses dipstick funnel OEM P/N 053-103-663 (053103663).
This billet dipstick replaces both OEM part number 027-115-611C (027115611C) and 051-115-611B (051115611B) and fits the following vehicles :
1993-1999 Jetta/Golf/Passat/Cabrio w.2.0 ABA engine
1990-1992 Corrado G60 1.8L
1985-1992 Jetta/Golf/Passat w/1.6L and 1.8L engines
Don’t see your car listed here? Don’t worry! We have many more of these billet dipsticks coming for nearly all makes / models. Visit www.GruvenParts.com for the latest.
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
06-29-2012 10:23 AM
#83
MK3 Golf/Jetta Billet Radiator Cover
Replace your plastic MK3 Golf or Jetta radiator fan cover - OEM P/N 1HM-121-343A (1HM121343A) with this machined billet aluminum version. Our part installs in minutes to give your engine bay the attention it deserves!
Ours is CNC'd from aerospace grade billet aluminum and sculpted to fit the contours of the MK3 Golf and Jetta engine bay perfectly.
Available in CNC machined finish or chrome plated. Custom engraving options are available. Send us an image of your desired engraving and we will quote it - Paul@GruvenParts.com.
Fits all 1993-1999 MK3 Golf and Jetta and replaces OEM P/N 1HM-121-343A (1HM121343A)
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
08-16-2012 08:41 AM
#84
Please make sure to like us out on Facebook
--
http://www.facebook.com/GruvenParts
--
Its a great way to keep up with all that we are developing, and request more items to be developed
www.GruvenParts.com
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
08-20-2012 10:00 AM
#85
MKIII 2.0 ABA Billet Lightweight Crank, Tensioner, and Alternator Pulleys – NON-UNDERDRIVE!
www.GruvenParts.com offers precision CNC billet lightweight (and Non-Under-driven) crank, tensioner, and alternator pulleys for the ABA 2.0 engines. The pulley set reduces engine rotating mass by over 4 lbs to help you squeeze out every last bit of power, without the problems associated with under-driving components. Our billet tensioner comes ready to install with a 20K rpm bearing to replace the cheap OEM plastic pulley. The crank pulley is a slick dual design which incorporates the power steering v-belt pulley with a light mounting flange (new shorter grade 12.9 attach bolts included). Finally, the alternator pulley is a paper light version of the OEM steel pulley to minimize parasitic losses.
Check out www.GruvenParts.com for all the billet goodies!
These parts replace the following OEM part numbers :
037-105-243A (037105243A) ABA crank pulley
037-105-253 (037105253) ABA power steering pulley
028-145-278E (028145278E) ABA serpentine tensioner pulley (also fits MK3 TDI)
028-903-119F (028903119F) and 028-903-119AA (028903119AA)ABA alternator pulley
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
09-10-2012 09:34 AM
#86
ABA / Corrado G60 / MK2 Billet Dipstick
www.GruvenParts.com is proud to release these gorgeous Billet Dipsticks to replace both OEM part number 027-115-611C (027115611C) and 051-115-611B (051115611B). Our billet dipstick is CNC’d from a solid block of 6061-T651 aluminum with a stainless steel cable permanently attached. The cable end has a flitting with hash marks to signify oil level min and max.
As an added bonus, this part is made to perfectly fit our Billet Dipstick Funnels and can be ordered as a set to save! If you are ordering the billet funnel with the billet dipstick, please ensure your car uses dipstick funnel OEM P/N 053-103-663 (053103663).
This billet dipstick replaces both OEM part number 027-115-611C (027115611C) and 051-115-611B (051115611B) and fits the following vehicles :
1993-1999 Jetta/Golf/Passat/Cabrio w.2.0 ABA engine
1990-1992 Corrado G60 1.8L
1985-1992 Jetta/Golf/Passat w/1.6L and 1.8L engines
Don’t see your car listed here? Don’t worry! We have many more of these billet dipsticks coming for nearly all makes / models. Visit www.GruvenParts.com for the latest.
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
09-20-2012 08:51 AM
#87
In stock, ready to ship !
Originally Posted by GruvenParts.com
MKIII 2.0 ABA Billet Lightweight Crank, Tensioner, and Alternator Pulleys – NON-UNDERDRIVE!
www.GruvenParts.com offers precision CNC billet lightweight (and Non-Under-driven) crank, tensioner, and alternator pulleys for the ABA 2.0 engines. The pulley set reduces engine rotating mass by over 4 lbs to help you squeeze out every last bit of power, without the problems associated with under-driving components. Our billet tensioner comes ready to install with a 20K rpm bearing to replace the cheap OEM plastic pulley. The crank pulley is a slick dual design which incorporates the power steering v-belt pulley with a light mounting flange (new shorter grade 12.9 attach bolts included). Finally, the alternator pulley is a paper light version of the OEM steel pulley to minimize parasitic losses.
Check out www.GruvenParts.com for all the billet goodies!
These parts replace the following OEM part numbers :
037-105-243A (037105243A) ABA crank pulley
037-105-253 (037105253) ABA power steering pulley
028-145-278E (028145278E) ABA serpentine tensioner pulley (also fits MK3 TDI)
028-903-119F (028903119F) and 028-903-119AA (028903119AA)ABA alternator pulley
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
09-27-2012 03:21 PM
#88
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
10-09-2012 09:21 AM
#89
Bump for LW pulley kits !
Originally Posted by GruvenParts.com
MKIII 2.0 ABA Billet Lightweight Crank, Tensioner, and Alternator Pulleys – NON-UNDERDRIVE!
www.GruvenParts.com offers precision CNC billet lightweight (and Non-Under-driven) crank, tensioner, and alternator pulleys for the ABA 2.0 engines. The pulley set reduces engine rotating mass by over 4 lbs to help you squeeze out every last bit of power, without the problems associated with under-driving components. Our billet tensioner comes ready to install with a 20K rpm bearing to replace the cheap OEM plastic pulley. The crank pulley is a slick dual design which incorporates the power steering v-belt pulley with a light mounting flange (new shorter grade 12.9 attach bolts included). Finally, the alternator pulley is a paper light version of the OEM steel pulley to minimize parasitic losses.
Check out www.GruvenParts.com for all the billet goodies!
These parts replace the following OEM part numbers :
037-105-243A (037105243A) ABA crank pulley
037-105-253 (037105253) ABA power steering pulley
028-145-278E (028145278E) ABA serpentine tensioner pulley (also fits MK3 TDI)
028-903-119F (028903119F) and 028-903-119AA (028903119AA)ABA alternator pulley
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
10-15-2012 10:45 AM
#90
-
Member
- Join Date
- Jul 11th, 1999
- Location
- NYC
- Posts
- 2,788
- Vehicles
- '99 mk3 Golf Wolfsburg (Black, 5spd, 200k mi +)
11-21-2012 11:49 AM
#91
emailed you guys awhile ago about a deal and got an email back saying sure but then nada.....are you guys gonna do turkey day/black friday sale or what?? i am interested in buying the whole set (3) of mk3 pulleys.
take the road less travelled...
__________________________
GermanAutoParts.com | TyrolSport.com
BrokeVW.com | Dan Reed's DIY VW site
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
12-03-2012 10:53 AM
#92
Thanks for the interest, we did get a quote to you finally, sorry it took a while.
Please let us know when ready to proceed, and as always its fastest to just call. Sometimes we get 300 emails in a day!
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
01-10-2013 10:25 AM
#94
MK3 Golf/Jetta Billet Radiator Cover
Replace your plastic MK3 Golf or Jetta radiator fan cover - OEM P/N 1HM-121-343A (1HM121343A) with this machined billet aluminum version. Our part installs in minutes to give your engine bay the attention it deserves!
Ours is CNC'd from aerospace grade billet aluminum and sculpted to fit the contours of the MK3 Golf and Jetta engine bay perfectly.
Available in CNC machined finish or chrome plated. Custom engraving options are available. Send us an image of your desired engraving and we will quote it - Paul@GruvenParts.com.
Fits all 1993-1999 MK3 Golf and Jetta and replaces OEM P/N 1HM-121-343A (1HM121343A)
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
01-31-2013 09:56 AM
#96
Billet 2.4” Vortech Supercharger Pulleys !
GruvenParts.com Billet 2.4” Supercharger Pulleys for Vortech Chargers !
Got a boost addiction? Check out these 2.4” diameter supercharger pulleys for V Series Vortech superchargers. This pulley will allow your charger to spin faster, creating more boost and more power.
These pulleys are precision CNC’d from 6061-T6511 aluminum and are sized to precisely match the shaft output on Vortech chargers. These pulleys are 7 rib, but can be used in 6 rib applications that provide enough clearance for a 7 rib pulley (you would just have 1 empty rib). Please note the offset distance (from charger side of pulley to the centerline of the 1st rib = 0.650”). Rib spacing is 0.140” center to center (for K style serpentine belts). The overall width from end to end = 1.640”.
These pulleys come machined to accept the standard woodruff key found on the Vortech V Series supercharger output shafts (key and bolt not included). Please calculate your maximum impeller RPM to ensure you do not overdrive the supercharger at high RPMs. This product may void any Vortech factory warranties.
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
02-04-2013 03:10 PM
#97
Originally Posted by GruvenParts.com
ABA / Corrado G60 / MK2 Billet Dipstick
www.GruvenParts.com is proud to release these gorgeous Billet Dipsticks to replace both OEM part number 027-115-611C (027115611C) and 051-115-611B (051115611B). Our billet dipstick is CNC’d from a solid block of 6061-T651 aluminum with a stainless steel cable permanently attached. The cable end has a flitting with hash marks to signify oil level min and max.
As an added bonus, this part is made to perfectly fit our Billet Dipstick Funnels and can be ordered as a set to save! If you are ordering the billet funnel with the billet dipstick, please ensure your car uses dipstick funnel OEM P/N 053-103-663 (053103663).
This billet dipstick replaces both OEM part number 027-115-611C (027115611C) and 051-115-611B (051115611B) and fits the following vehicles :
1993-1999 Jetta/Golf/Passat/Cabrio w.2.0 ABA engine
1990-1992 Corrado G60 1.8L
1985-1992 Jetta/Golf/Passat w/1.6L and 1.8L engines
Don’t see your car listed here? Don’t worry! We have many more of these billet dipsticks coming for nearly all makes / models. Visit www.GruvenParts.com for the latest.
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
02-11-2013 08:15 AM
#98
Monday bump !
Originally Posted by GruvenParts.com
MK3 Golf/Jetta Billet Radiator Cover
Replace your plastic MK3 Golf or Jetta radiator fan cover - OEM P/N 1HM-121-343A (1HM121343A) with this machined billet aluminum version. Our part installs in minutes to give your engine bay the attention it deserves!
Ours is CNC'd from aerospace grade billet aluminum and sculpted to fit the contours of the MK3 Golf and Jetta engine bay perfectly.
Available in CNC machined finish or chrome plated. Custom engraving options are available. Send us an image of your desired engraving and we will quote it - Paul@GruvenParts.com.
Fits all 1993-1999 MK3 Golf and Jetta and replaces OEM P/N 1HM-121-343A (1HM121343A)
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
02-18-2013 09:05 AM
#99
In stock, ready to ship
Originally Posted by GruvenParts.com
MKIII 2.0 ABA Billet Lightweight Crank, Tensioner, and Alternator Pulleys – NON-UNDERDRIVE!
www.GruvenParts.com offers precision CNC billet lightweight (and Non-Under-driven) crank, tensioner, and alternator pulleys for the ABA 2.0 engines. The pulley set reduces engine rotating mass by over 4 lbs to help you squeeze out every last bit of power, without the problems associated with under-driving components. Our billet tensioner comes ready to install with a 20K rpm bearing to replace the cheap OEM plastic pulley. The crank pulley is a slick dual design which incorporates the power steering v-belt pulley with a light mounting flange (new shorter grade 12.9 attach bolts included). Finally, the alternator pulley is a paper light version of the OEM steel pulley to minimize parasitic losses.
Check out www.GruvenParts.com for all the billet goodies!
These parts replace the following OEM part numbers :
037-105-243A (037105243A) ABA crank pulley
037-105-253 (037105253) ABA power steering pulley
028-145-278E (028145278E) ABA serpentine tensioner pulley (also fits MK3 TDI)
028-903-119F (028903119F) and 028-903-119AA (028903119AA)ABA alternator pulley
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
03-11-2013 12:15 PM
#101
Originally Posted by GruvenParts.com
MK3 Golf/Jetta Billet Radiator Cover
Replace your plastic MK3 Golf or Jetta radiator fan cover - OEM P/N 1HM-121-343A (1HM121343A) with this machined billet aluminum version. Our part installs in minutes to give your engine bay the attention it deserves!
Ours is CNC'd from aerospace grade billet aluminum and sculpted to fit the contours of the MK3 Golf and Jetta engine bay perfectly.
Available in CNC machined finish or chrome plated. Custom engraving options are available. Send us an image of your desired engraving and we will quote it - Paul@GruvenParts.com.
Fits all 1993-1999 MK3 Golf and Jetta and replaces OEM P/N 1HM-121-343A (1HM121343A)
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
04-23-2013 09:50 AM
#103
MK3 Golf/Jetta Billet Radiator Cover
Replace your plastic MK3 Golf or Jetta radiator fan cover - OEM P/N 1HM-121-343A (1HM121343A) with this machined billet aluminum version. Our part installs in minutes to give your engine bay the attention it deserves!
Ours is CNC'd from aerospace grade billet aluminum and sculpted to fit the contours of the MK3 Golf and Jetta engine bay perfectly.
Available in CNC machined finish or chrome plated. Custom engraving options are available. Send us an image of your desired engraving and we will quote it - Paul@GruvenParts.com.
Fits all 1993-1999 MK3 Golf and Jetta and replaces OEM P/N 1HM-121-343A (1HM121343A)
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
05-02-2013 08:48 AM
#104
MKIII 2.0 ABA Billet Lightweight Crank, Tensioner, and Alternator Pulleys – NON-UNDERDRIVE!
www.GruvenParts.com offers precision CNC billet lightweight (and Non-Under-driven) crank, tensioner, and alternator pulleys for the ABA 2.0 engines. The pulley set reduces engine rotating mass by over 4 lbs to help you squeeze out every last bit of power, without the problems associated with under-driving components. Our billet tensioner comes ready to install with a 20K rpm bearing to replace the cheap OEM plastic pulley. The crank pulley is a slick dual design which incorporates the power steering v-belt pulley with a light mounting flange (new shorter grade 12.9 attach bolts included). Finally, the alternator pulley is a paper light version of the OEM steel pulley to minimize parasitic losses.
Check out www.GruvenParts.com for all the billet goodies!
These parts replace the following OEM part numbers :
037-105-243A (037105243A) ABA crank pulley
037-105-253 (037105253) ABA power steering pulley
028-145-278E (028145278E) ABA serpentine tensioner pulley (also fits MK3 TDI)
028-903-119F (028903119F) and 028-903-119AA (028903119AA)ABA alternator pulley
-
Banner Advertiser
- Join Date
- Jul 31st, 2007
- Location
- Atlanta, GA
- Posts
- 16,712
- Vehicles
- Too many to list !
05-06-2013 09:21 AM
#105
What other parts do you want to see made for these cars? We are always looking for new parts
www.GruvenParts.com
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
For advertising information click HERE
