Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Page 2 of 4 FirstFirst 1234 LastLast
    Results 26 to 50 of 85

    Thread: ** GruvenParts.com Has Audi Parts for Our Canadian Customers !

    1. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,579
      Vehicles
      Too many to list !
      11-29-2010 10:20 AM #26
      post turkey day bump !!

      Quote Originally Posted by GruvenParts.com View Post

      TT/R32 Rear Adjustable Control Arms

      Got a lowered TT or R32 ? Then you already know how the camber and toe become completely out of sorts, causing poor handling and expensive tire wear the more its lowered. Don't fret, GruvenParts.com has your solution.

      We are proud to release these adjustable upper and lower rear control arms made from indestructible 4340 aircraft steel tubing. These high quality arms include greaseable heim joints and bulletproof welds. Each control arm provides up to 2 FULL INCHES of adjustment ON THE CAR (does not require removal for adjustment of both camber and toe).

      We know the economy is tough right now, so we are offering these at prices well under our competition. Buy 2 sets and save !!!

      This product fits Audi TT (2001-2006), Audi A3/S3, VW R32 (2004), VW Golf 4motion and 4motion Variant, VW Bora 4motion and 4motion Variant and replaces P/N 1J0-505-323L (1J0505323L) and 1J0-505-323N (1J0505323N).

      Want further discounts and more great products from GruvenParts.com? Read on!


      TT/R32 Rear Adjustable Sway Bar End Linkages

      Got a lowered TT or R32 ? Then you need to be able to adjust your rear stabilizer bar end links to ensure the linkages ride perpendicular to the swaybar and correct the less than ideal handling typical of lowered set ups. The factory set up does not provide any adjustability in the swaybar end links but GruvenParts.com has you covered!

      Our adjustable end links are made from aerospace grade 6061-T651 aluminum hex and feature 2 full inches of adjustment ON THE CAR. This makes for very quick and easy length adjustment on both the top and bottom of the linkage to completely fine tune just about any suspension set up. Our linkages utilize high quality greaseable heim joints for many years of smooth and quiet operation. While we recommend using our fully adjustable rear control arms, you can install these end links without them. The main body is show quality powder coated jazz blue to match our control arms, and like all of our parts they are made right here in Atlanta, Georgia by our FAA approved commercial jet aviation machine shop on state of the art HAAS mills and lathes. You wont find higher quality anywhere!

      This product fits Audi TT (2001-2006), Audi A3/S3, VW R32 (2004), VW Golf 4motion and 4motion Variant, VW Bora 4motion and 4motion Variant and replaces OEM linkage P/N 1J0-505-466B (1J0505466B).

      Please note : This product is sold in sets of 2 (1 for each side) and includes all required spacers and the upper bolt/lock nut. Re-use existing lower bolt.

    2. Member G-radoT's Avatar
      Join Date
      May 20th, 2006
      Location
      Wouldn't you like to know.
      Posts
      522
      Vehicles
      2008 Audi S3, 2000 Audi A4 1.8T BT GT2871R Big Turbo/, 1990 Corrado G60 (SOLD),1993 Corrado (Sold)
      12-01-2010 07:13 AM #27
      Quote Originally Posted by G-radoT View Post

    3. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,579
      Vehicles
      Too many to list !
      12-08-2010 01:27 PM #28
      bump for some billet goodies


    4. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,579
      Vehicles
      Too many to list !
      01-03-2011 11:30 AM #30


      Billet Dipstick Funnel

      Finally, a replacement for the orange plastic dipstick funnel !

      Our funnel is made from 6061-T6 billet aluminum and neatly replaces the cheap brittle orange dipstick funnel we have all come to hate. Choose from as machined finish or highly polished finish.

      This part replaces OEM part number 053-103-663 (053103663) on the following vehicles:

      Audi - 80, B5 A4 1.8T – all 4 cylinder
      VW – MK2 Golf, Jetta, Scirocco, Corrado G60 (NOT VR6), MK3 ABA’s, Eurovan T4, B3, B4, B5 Passat 1.8T and 2.0

    5. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,579
      Vehicles
      Too many to list !
      01-10-2011 09:11 AM #31
      Now You Can Choose from Jazz Blue or High Gloss Black Powdercoat Finish !!


      TT/R32 Rear Adjustable Control Arms

      Got a lowered TT or R32 ? Then you already know how the camber and toe become completely out of sorts, causing poor handling and expensive tire wear the more its lowered. Don't fret, GruvenParts.com has your solution.

      We are proud to release these adjustable upper and lower rear control arms made from indestructible 4340 aircraft steel tubing. These high quality arms include greaseable heim joints and bulletproof welds. Each control arm provides up to 2 FULL INCHES of adjustment ON THE CAR (does not require removal for adjustment of both camber and toe).

      We know the economy is tough right now, so we are offering these at prices well under our competition. Buy 2 sets and save !!!

      This product fits Audi TT (2001-2006), Audi A3/S3, VW R32 (2004), VW Golf 4motion and 4motion Variant, VW Bora 4motion and 4motion Variant and replaces P/N 1J0-505-323L (1J0505323L) and 1J0-505-323N (1J0505323N).

      Want further discounts and more great products from GruvenParts.com? Read on!


      TT/R32 Rear Adjustable Sway Bar End Linkages

      Got a lowered TT or R32 ? Then you need to be able to adjust your rear stabilizer bar end links to ensure the linkages ride perpendicular to the swaybar and correct the less than ideal handling typical of lowered set ups. The factory set up does not provide any adjustability in the swaybar end links but GruvenParts.com has you covered!

      Our adjustable end links are made from aerospace grade 6061-T651 aluminum hex and feature 2 full inches of adjustment ON THE CAR. This makes for very quick and easy length adjustment on both the top and bottom of the linkage to completely fine tune just about any suspension set up. Our linkages utilize high quality greaseable heim joints for many years of smooth and quiet operation. While we recommend using our fully adjustable rear control arms, you can install these end links without them. The main body is show quality powder coated jazz blue to match our control arms, and like all of our parts they are made right here in Atlanta, Georgia by our FAA approved commercial jet aviation machine shop on state of the art HAAS mills and lathes. You wont find higher quality anywhere!

      This product fits Audi TT (2001-2006), Audi A3/S3, VW R32 (2004), VW Golf 4motion and 4motion Variant, VW Bora 4motion and 4motion Variant and replaces OEM linkage P/N 1J0-505-466B (1J0505466B).

      Please note : This product is sold in sets of 2 (1 for each side) and includes all required spacers and the upper bolt/lock nut. Re-use existing lower bolt.

    6. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,579
      Vehicles
      Too many to list !
      01-18-2011 02:43 PM #32


      Billet Dipstick Funnel

      A Billet Replacement for the Dreaded 1.8T Dipstick Funnel Has Arrived !!

      This one is made from 6061-T6 billet aluminum and neatly replaces the cheap brittle orange dipstick funnel we have all come to hate.

      This part replaces OEM P/N 06A-103-663B (06A103663B) on the following vehicles :

      MK1 Audi TT 1.8T, MKIV Golf 1.8T, MKIV Jetta 1.8T, and New Beetle 1.8T

      Be sure to check your OEM part number to verify it is 06A-103-663B as VW and Audi have made several variations of the worthless orange dipstick tube.

      Forget about ever breaking your 1.8T dipstick tube again !!

    7. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,579
      Vehicles
      Too many to list !
      01-31-2011 11:56 AM #33

      A4/B5 Front Adjustable Control Arms

      Audi A4/S4/RS4/A6/RS6 and VW Passat B5 Adjustable Front Upper Control Arms

      BY FAR – THE BEST VALUE IN ADJUSTABLE CONTROL ARMS ON THE MARKET !


      You asked GruvenParts.com for affordable, bulletproof, and fully rebuildable Audi A4/S4/RS4/A6/RS6 and VW Passat B5 Adjustable Front Upper Control Arms and we have delivered!

      Just like the GruvenParts.com popular TT/R32 rear adjustable control arms, we designed these based on years of fabricating rock crawler suspension systems for racers and weekend warriors alike. They are made from a special aircraft grade of 4130 chrominum-molybdenum alloy and then powder coated in high gloss black for maximum durability. The AMERICAN MADE racing heim joints are CAD plated, PTFE lined, and can be ordered with dust boots all around for those planning to re-enact a Grouppe B Ralley race. Finally, all parts are fully rebuildable.

      Don’t waste your hard earned money with the over-priced competitor versions. The quality and performance of the GruvenParts.com adjustable upper control arms are second to none!

      These come as a set of 4 and fit the following models :

      Audi A4/S4/RS4 – 1996-2008 (B5, B6, B7, C5)
      Audi A6/RS6 (incl. AllRoad) - 1998-2004
      VW Passat - 1998-2005

      This product replaces OEM Part Numbers 8E0-407-505C, 8E0-407-505A, 8E0-407-506C, 8E0-407-506A, 8E0-407-509C, 8E0-407-509A, 8E0-407-510A (and possibly others). (8E0407505C, 8E0407505A, 8E0407506C, 8E0407506A, 8E0407509C, 8E0407509A, 8E0407510A)

    8. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,579
      Vehicles
      Too many to list !
      02-10-2011 08:56 AM #34

      CNC Pressed MSD Coil Pack Brackets for MK3 and MK4 VR6 !

      Use this CNC formed, powder coated Aerospace grade aluminum bracket to mount your new MSD 8224 coils on MK3 or MK4 VR6 engines. We all know how poorly the OEM Beru units hold up - so get serious about your VR6 ignition and step up to MSD! Leave the cheaply made, overpriced Beru coils for the competition!


    9. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,579
      Vehicles
      Too many to list !
      02-21-2011 11:29 AM #36

      TT/R32 Rear Adjustable Control Arms

      Got a lowered TT or R32 ? Then you already know how the camber and toe become completely out of sorts, causing poor handling and expensive tire wear the more its lowered. Don't fret, GruvenParts.com has your solution.

      We are proud to release these adjustable upper and lower rear control arms made from indestructible 4340 aircraft steel tubing. These high quality arms include greaseable heim joints and bulletproof welds. Each control arm provides up to 2 FULL INCHES of adjustment ON THE CAR (does not require removal for adjustment of both camber and toe).

      We know the economy is tough right now, so we are offering these at prices well under our competition. Buy 2 sets and save !!!

      This product fits Audi TT (2001-2006), Audi A3/S3, VW R32 (2004), VW Golf 4motion and 4motion Variant, VW Bora 4motion and 4motion Variant and replaces P/N 1J0-505-323L (1J0505323L) and 1J0-505-323N (1J0505323N).

      Want further discounts and more great products from GruvenParts.com? Read on!


      TT/R32 Rear Adjustable Sway Bar End Linkages

      Got a lowered TT or R32 ? Then you need to be able to adjust your rear stabilizer bar end links to ensure the linkages ride perpendicular to the swaybar and correct the less than ideal handling typical of lowered set ups. The factory set up does not provide any adjustability in the swaybar end links but GruvenParts.com has you covered!

      Our adjustable end links are made from aerospace grade 6061-T651 aluminum hex and feature 2 full inches of adjustment ON THE CAR. This makes for very quick and easy length adjustment on both the top and bottom of the linkage to completely fine tune just about any suspension set up. Our linkages utilize high quality greaseable heim joints for many years of smooth and quiet operation. While we recommend using our fully adjustable rear control arms, you can install these end links without them. The main body is show quality powder coated jazz blue to match our control arms, and like all of our parts they are made right here in Atlanta, Georgia by our FAA approved commercial jet aviation machine shop on state of the art HAAS mills and lathes. You wont find higher quality anywhere!

      This product fits Audi TT (2001-2006), Audi A3/S3, VW R32 (2004), VW Golf 4motion and 4motion Variant, VW Bora 4motion and 4motion Variant and replaces OEM linkage P/N 1J0-505-466B (1J0505466B).

      Please note : This product is sold in sets of 2 (1 for each side) and includes all required spacers and the upper bolt/lock nut. Re-use existing lower bolt.

    10. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,579
      Vehicles
      Too many to list !
      03-22-2011 10:04 AM #37


      A4 / Passat 1.8T Billet Dipstick

      www.GruvenParts.com is proud to release these gorgeous Billet Dipsticks to replace OEM part number 053-115-611C (053115611C). Our billet dipstick is CNC’d from a solid block of 6061-T651 aluminum with a stainless steel cable permanently attached. The cable end has a flitting with hash marks to signify oil level min and max.

      As an added bonus, this part is made to perfectly fit our Billet Dipstick Funnels and can be ordered as a set to save! If you are ordering the billet funnel with the billet dipstick, please ensure your car uses dipstick funnel OEM P/N 053-103-663 (053103663).

      This billet dipstick replaces OEM part number 053-115-611C (053115611C) and fits the following vehicles :

      1996 - 2002 Audi A4/S4/Avant Quattro 1.8T (AEB)
      1998 – 2001 VW Passat 1.8T (AEB)
      1988 – 1992 Audi 80/90
      1982 – 1987 Audi 4000
      1987 – 1993 VW Fox
      1982 - 1985 VW Quantum 1.8L

      Don’t see your car listed here? Don’t worry! We have many more of these billet dipsticks coming for nearly all makes / models. Visit www.GruvenParts.com for the latest.

    11. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,579
      Vehicles
      Too many to list !
      03-28-2011 01:45 PM #38
      Bump for billet goodness and lots more is on the way !

      www.GruvenParts.com

      Our TT/R32 + A4/Passat Adjustable control arms are now available fully booted for extreme environments.


      TT/R32 Rear Adjustable Control Arms



      A4/B5 Front Adjustable Control Arms

    12. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,579
      Vehicles
      Too many to list !
      04-05-2011 02:05 PM #39
      Bump for some sexy parts


    13. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,579
      Vehicles
      Too many to list !
      05-12-2011 02:15 PM #41

      A4/B5 Front Adjustable Control Arms

      Audi A4/S4/RS4/A6/RS6 and VW Passat B5 Adjustable Front Upper Control Arms

      BY FAR – THE BEST VALUE IN ADJUSTABLE CONTROL ARMS ON THE MARKET !


      You asked GruvenParts.com for affordable, bulletproof, and fully rebuildable Audi A4/S4/RS4/A6/RS6 and VW Passat B5 Adjustable Front Upper Control Arms and we have delivered!

      Just like the GruvenParts.com popular TT/R32 rear adjustable control arms, we designed these based on years of fabricating rock crawler suspension systems for racers and weekend warriors alike. They are made from a special aircraft grade of 4130 chrominum-molybdenum alloy and then powder coated in high gloss black for maximum durability. The heim joints are CAD plated, PTFE lined, and can be ordered with dust boots all around for those planning to re-enact a Grouppe B Ralley race. Finally, all parts are fully rebuildable.

      Don’t waste your hard earned money with the over-priced competitor versions. The quality and performance of the GruvenParts.com adjustable upper control arms are second to none!

      These come as a set of 4 and fit the following models :

      Audi A4/S4/RS4 – 1996-2008 (B5, B6, B7, C5)
      Audi A6/RS6 (incl. AllRoad) - 1998-2004
      VW Passat - 1998-2005

      This product replaces OEM Part Numbers 8E0-407-505C, 8E0-407-505A, 8E0-407-506C, 8E0-407-506A, 8E0-407-509C, 8E0-407-509A, 8E0-407-510A (and possibly others). (8E0407505C, 8E0407505A, 8E0407506C, 8E0407506A, 8E0407509C, 8E0407509A, 8E0407510A)

    14. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,579
      Vehicles
      Too many to list !
      05-16-2011 01:37 PM #42
      These are back in stock (in black) and ready to go !!


      TT/R32 Rear Adjustable Control Arms

      www.GruvenParts.com

    15. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,579
      Vehicles
      Too many to list !
      05-23-2011 08:54 AM #43
      GruvenParts.com has released this billet intake drive unit arm for ALL VW/Audi VR6 engines with variable intake manifolds!


      Billet Intake Manifold Drive Unit Linkage!

      This part replaces the white plastic part that attaches to the actuator arm. The OEM part is made from injection molded nylon and becomes very brittle in the engine heat. Of course VW/Audi will not sell you *JUST* this part, you would have to buy a whole new drive unit for big bucks and get a bunch of stuff you don’t need.

      GruvenParts.com builds these the way VW should have: from a solid chunk of 6061-T651 aircraft grade aluminum on a 4 axis HAAS mill-lathe. Utilizing some tricks within the SolidWorks/MasterCam CNC software, we have tweaked the process to allow the billet part to be machined specially to accept the locking feature on the end of the intake rod. Just push fit this part onto the end of the intake rod similar to OEM plastic part fitment. There are no set screws to come loose and the fit is perfect.

      This part makes a great upgrade when installing our upgraded MKIV VR6 Intake Manifold Bushings

      Our part will also cost you about 1/3 what VW/Audi charge for their plastic drive unit (and the OEM plastic part is NOT part of their repair kit). This one is a no brainer!

      You guys asked us for it and we listened. Another great billet replacement part to rid your VW/Audi of the weak plastic parts!

      Don’t forget to check out the DIY listed on our website.

      Applications:
      2.8L 12 V VR6 ENGINE - with AFP Engine Code (99-02 Golf/Jetta VR6) to replace the drive unit linkage p/n 071-133-759D (071133759D) on OEM VW rod p/n 021-133-653 (021133653)

      2.8L 24 V VR6 ENGINE - BDF Engine Code (02 - present Golf/Jetta VR6) to replace the drive unit linkage p/n 022-133-759 (022133759) on OEM VW rod p/n 022-133-653 (022133653)

      3.2L 24V VR6 Engines - 04 R32, 3.2 Touareg, 3.2 Eos, 3.2 A3, 3.2 TT to replace the drive unit linkage p/n 022-133-759A (022133759A) on rod p/n 022-133-653B (022133653B)


    16. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,579
      Vehicles
      Too many to list !
      06-10-2011 11:45 AM #45
      These are BACK IN STOCK!!


      A4/B5 Front Adjustable Control Arms

      Audi A4/S4/RS4/A6/RS6 and VW Passat B5 Adjustable Front Upper Control Arms

      BY FAR – THE BEST VALUE IN ADJUSTABLE CONTROL ARMS ON THE MARKET !


      You asked GruvenParts.com for affordable, bulletproof, and fully rebuildable Audi A4/S4/RS4/A6/RS6 and VW Passat B5 Adjustable Front Upper Control Arms and we have delivered!

      Just like the GruvenParts.com popular TT/R32 rear adjustable control arms, we designed these based on years of fabricating rock crawler suspension systems for racers and weekend warriors alike. They are made from a special aircraft grade of 4130 chrominum-molybdenum alloy and then powder coated in high gloss black for maximum durability. The heim joints are CAD plated, PTFE lined for quiet operation, and can be ordered with dust boots all around for those planning to re-enact a Grouppe B Ralley race. All parts are fully rebuildable.

      Don’t waste your hard earned money with the over-priced competitor versions. The quality and performance of the GruvenParts.com adjustable upper control arms are second to none!

      These come as a set of 4 and fit the following models :

      Audi A4/S4/RS4 – 1996-2008 (B5, B6, B7, C5)
      Audi A6/RS6 (incl. AllRoad) - 1998-2004
      VW Passat - 1998-2005

      This product replaces OEM Part Numbers 8E0-407-505C, 8E0-407-505A, 8E0-407-506C, 8E0-407-506A, 8E0-407-509C, 8E0-407-509A, 8E0-407-510A (and possibly others). (8E0407505C, 8E0407505A, 8E0407506C, 8E0407506A, 8E0407509C, 8E0407509A, 8E0407510A)

    17. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,579
      Vehicles
      Too many to list !
      06-29-2011 02:56 PM #46


      Billet MK4 1.8T Golf/Jetta, TT Dipstick Funnel


      GruvenParts.com is proud to release these gorgeous Billet Dipsticks to replace OEM part number 06A-115-611Q (06A115611Q) and 06B-115-611R (06B115611R) for the Audi TT MKI 1.8T, and VW MKIV 1.8T Golf and Jetta.

      Our billet dipstick is CNC’d from a solid block of 6061-T651 aluminum with a stainless steel cable permanently attached. The cable end has a fitting with hash marks to signify oil level min and max.

      As an added bonus, this part is made to perfectly fit our 1.8T Billet Dipstick Funnels and can be ordered as a set to save! If you are ordering the billet funnel with the billet dipstick, please ensure your car uses dipstick funnel OEM P/N 06A-103-663B (06A103663B)

      This billet dipstick/funnel combo replaces OEM part number 06A-115-611Q (06A115611Q) and 06B-115-611R (06B115611R) dipstick and OEM P/N 06A-103-663B (06A103663B) funnel and fits the following vehicles :

      Audi TT - MK1 w/1.8T engine

      VW Golf, Jetta, and New Beetle - MKIV 1.8T w/1.8T engine

    18. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,579
      Vehicles
      Too many to list !
      07-06-2011 10:05 AM #47

      Audi/VW 4.2V8 Intake Linkage Arms !

      GruvenParts.com 4.2L V8 Intake Manifold Linkage Arms Warranted for Life !

      Got a 4.2L V8 Audi or VW ? Then you had better check your intake manifold actuator arms Audi/VW P/N 077-198-327A (077198327A)! The OEM plastic versions quickly break, leaving your intake manifold rod stuck which causes poor idle, drivability, loss of power, and poor fuel mileage. This is a very common problem on the Audi/VW 4.2L V8, an otherwise great engine. The dealer will only sell you a repair kit for nearly $400, and each repair kit only comes with 1 of each length linkage arm. If your vechicle has 2 broken linkage arms, you would need to buy 2 dealer repair kits (cost nearly $800)!

      Our Billet intake manifold arms are made from aerospace grade 6061-T651 aluminum with specially machined black Delrin inserts to provide a perfect fit to the actuator balls. These parts are warrantied for life!

      Dont go to the VW/Audi dealer and pay upwards of $400 for the new actuator kit when all you need are the arms (the actuators themselves rarely fail). And DONT pay that kind of money for another set of plastic arms that will break in quick order.

      Go with GruvenParts.com and NEVER WORRY ABOUT THIS AGAIN !

      Fits the following vehicles:

      2004-2007 VW Phaeton V8
      2003+ VW Touareg V8
      2002-2004 Audi A6/Avant
      1998-2004 Audi A6/S6 Quattro
      2000+ Audi A8/S8 Quattro

      Replaces OEM P/N 077198327A (077-198-327A)


    19. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,579
      Vehicles
      Too many to list !
      07-18-2011 02:12 PM #49


      Billet Audi TT LED Alarm Rings

      We’re proud to release these LED Alarm rings made from 6061-T651 aluminum. These come 2 to a set and are anodized in a variety of colors to provide a subtle and yet customized look for your interior.

      This product fits 00-06 TT 180 and 225 HP with 1.8T engines

    20. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,579
      Vehicles
      Too many to list !
      07-25-2011 11:49 AM #50
      Bump for more billet parts !

      Quote Originally Posted by GruvenParts.com View Post


      A4 / Passat 1.8T Billet Dipstick

      www.GruvenParts.com is proud to release these gorgeous Billet Dipsticks to replace OEM part number 053-115-611C (053115611C). Our billet dipstick is CNC’d from a solid block of 6061-T651 aluminum with a stainless steel cable permanently attached. The cable end has a flitting with hash marks to signify oil level min and max.

      As an added bonus, this part is made to perfectly fit our Billet Dipstick Funnels and can be ordered as a set to save! If you are ordering the billet funnel with the billet dipstick, please ensure your car uses dipstick funnel OEM P/N 053-103-663 (053103663).

      This billet dipstick replaces OEM part number 053-115-611C (053115611C) and fits the following vehicles :

      1996 - 2002 Audi A4/S4/Avant Quattro 1.8T (AEB)
      1998 – 2001 VW Passat 1.8T (AEB)
      1988 – 1992 Audi 80/90
      1982 – 1987 Audi 4000
      1987 – 1993 VW Fox
      1982 - 1985 VW Quantum 1.8L

      Don’t see your car listed here? Don’t worry! We have many more of these billet dipsticks coming for nearly all makes / models. Visit www.GruvenParts.com for the latest.

    Page 2 of 4 FirstFirst 1234 LastLast

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •