** GruvenParts.com Has Billet Touareg Goodies !

[GruvenParts.com]

Audi/VW 4.2V8 Intake Linkage Arms !

GruvenParts.com 4.2L V8 Intake Manifold Linkage Arms Warranted for Life !

Got a 4.2L V8 Audi or VW ? Then you had better check your intake manifold actuator arms Audi/VW P/N 077-198-327A (077198327A)! The OEM plastic versions quickly break, leaving your intake manifold rod stuck which causes poor idle, drivability, loss of power, and poor fuel mileage. This is a very common problem on the Audi/VW 4.2L V8, an otherwise great engine. The dealer will only sell you a repair kit for nearly $400, and each repair kit only comes with 1 of each length linkage arm. If your vechicle has 2 broken linkage arms, you would need to buy 2 dealer repair kits (cost nearly $800)!

Our Billet intake manifold arms are made from aerospace grade 6061-T651 aluminum with specially machined black Delrin inserts to provide a perfect fit to the actuator balls. These parts are warrantied for life!

Dont go to the VW/Audi dealer and pay upwards of $400 for the new actuator kit when all you need are the arms (the actuators themselves rarely fail). And DONT pay that kind of money for another set of plastic arms that will break in quick order.

Go with GruvenParts.com and NEVER WORRY ABOUT THIS AGAIN !

Fits the following vehicles:

2004-2007 VW Phaeton V8
2003+ VW Touareg V8
2002-2004 Audi A6/Avant
1998-2004 Audi A6/S6 Quattro
2000+ Audi A8/S8 Quattro

Replaces OEM P/N 077198327A (077-198-327A)

[GruvenParts.com]

www.GruvenParts.com

[GruvenParts.com]

Bump for Billet

[GruvenParts.com]

www.GruvenParts.com

[GruvenParts.com]

Bump for more billet parts !

Audi/VW 4.2V8 Intake Linkage Arms !

GruvenParts.com 4.2L V8 Intake Manifold Linkage Arms Warranted for Life !

Got a 4.2L V8 Audi or VW ? Then you had better check your intake manifold actuator arms Audi/VW P/N 077-198-327A (077198327A)! The OEM plastic versions quickly break, leaving your intake manifold rod stuck which causes poor idle, drivability, loss of power, and poor fuel mileage. This is a very common problem on the Audi/VW 4.2L V8, an otherwise great engine. The dealer will only sell you a repair kit for nearly $400, and each repair kit only comes with 1 of each length linkage arm. If your vechicle has 2 broken linkage arms, you would need to buy 2 dealer repair kits (cost nearly $800)!

Our Billet intake manifold arms are made from aerospace grade 6061-T651 aluminum with specially machined black Delrin inserts to provide a perfect fit to the actuator balls. These parts are warrantied for life!

Dont go to the VW/Audi dealer and pay upwards of $400 for the new actuator kit when all you need are the arms (the actuators themselves rarely fail). And DONT pay that kind of money for another set of plastic arms that will break in quick order.

Go with GruvenParts.com and NEVER WORRY ABOUT THIS AGAIN !

Fits the following vehicles:

2004-2007 VW Phaeton V8
2003+ VW Touareg V8
2002-2004 Audi A6/Avant
1998-2004 Audi A6/S6 Quattro
2000+ Audi A8/S8 Quattro

Replaces OEM P/N 077198327A (077-198-327A)

[VWHACK]

what ever happened to the skid plate?

[GruvenParts.com]

Nobody ever sent dimensions. I still want to make those, think it would be an excellent addition to Touareg, and quite frankly I cant believe they dont come with 1 standard.

Can anyone help us with dimensions ?

[VWHACK]

Send me a call tag, I will send you mine as a template.
Here's my truck

[GruvenParts.com]

Send me an email with the details :

- year/make/model the plate will fit on

- size/weight of the plate

- return ship address.

Nice looking ride

[VWHACK]

I'll pull mine off and box it up.
thanks, its a beater / customer shuttle / parts runner

[schubie]

I'm still interested in what you guys can pull together. And I think there's wider demand for a plate with OEM-like fit. Especially if it doesn't interfere with oil changes (anymore than the stock plastic does). Good luck & keep us posted--Chris

[GruvenParts.com]

OK let me know. Please email paul@gruvenparts.com with shipping details so we can get ahold of it and start on a design. Good suggestion on the oil changes, we'll make it where those are easy with the plate installed!

[GruvenParts.com]

Bump for billet intake drive links and hopefully skidplates too.

[GruvenParts.com]

Wheres that skidplate? Tracking # ???

[GruvenParts.com]

Audi/VW 4.2V8 Intake Linkage Arms !

GruvenParts.com 4.2L V8 Intake Manifold Linkage Arms Warranted for Life !

Got a 4.2L V8 Audi or VW ? Then you had better check your intake manifold actuator arms Audi/VW P/N 077-198-327A (077198327A)! The OEM plastic versions quickly break, leaving your intake manifold rod stuck which causes poor idle, drivability, loss of power, and poor fuel mileage. This is a very common problem on the Audi/VW 4.2L V8, an otherwise great engine. The dealer will only sell you a repair kit for nearly $400, and each repair kit only comes with 1 of each length linkage arm. If your vechicle has 2 broken linkage arms, you would need to buy 2 dealer repair kits (cost nearly $800)!

Our Billet intake manifold arms are made from aerospace grade 6061-T651 aluminum with specially machined black Delrin inserts to provide a perfect fit to the actuator balls. These parts are warrantied for life!

Dont go to the VW/Audi dealer and pay upwards of $400 for the new actuator kit when all you need are the arms (the actuators themselves rarely fail). And DONT pay that kind of money for another set of plastic arms that will break in quick order.

Go with GruvenParts.com and NEVER WORRY ABOUT THIS AGAIN !

Fits the following vehicles:

2004-2007 VW Phaeton V8
2003+ VW Touareg V8
2002-2004 Audi A6/Avant
1998-2004 Audi A6/S6 Quattro
2000+ Audi A8/S8 Quattro

Replaces OEM P/N 077198327A (077-198-327A)

[SickTRed08FSI]

This may seem from left field.....
How about billet grille for facelift Touareg(like 2010)?? None out there right now.

[GruvenParts.com]

Picture please I will check into that.

And is there any word on the skid plate? Been waiting on tracking # ...

[GruvenParts.com]

bump for Touareg goodies!

www.GruvenParts.com

[GruvenParts.com]

All orders are shipping TODAY, sorry for any delays.

Audi/VW 4.2V8 Intake Linkage Arms !

GruvenParts.com 4.2L V8 Intake Manifold Linkage Arms Warranted for Life !

Got a 4.2L V8 Audi or VW ? Then you had better check your intake manifold actuator arms Audi/VW P/N 077-198-327A (077198327A)! The OEM plastic versions quickly break, leaving your intake manifold rod stuck which causes poor idle, drivability, loss of power, and poor fuel mileage. This is a very common problem on the Audi/VW 4.2L V8, an otherwise great engine. The dealer will only sell you a repair kit for nearly $400, and each repair kit only comes with 1 of each length linkage arm. If your vechicle has 2 broken linkage arms, you would need to buy 2 dealer repair kits (cost nearly $800)!

Our Billet intake manifold arms are made from aerospace grade 6061-T651 aluminum with specially machined black Delrin inserts to provide a perfect fit to the actuator balls. These parts are warrantied for life!

Dont go to the VW/Audi dealer and pay upwards of $400 for the new actuator kit when all you need are the arms (the actuators themselves rarely fail). And DONT pay that kind of money for another set of plastic arms that will break in quick order.

Go with GruvenParts.com and NEVER WORRY ABOUT THIS AGAIN !

Fits the following vehicles:

2004-2007 VW Phaeton V8
2003+ VW Touareg V8
2002-2004 Audi A6/Avant
1998-2004 Audi A6/S6 Quattro
2000+ Audi A8/S8 Quattro

Replaces OEM P/N 077198327A (077-198-327A)

[GruvenParts.com]

All parts are now back in stock, ready to ship world wide !

www.GruvenParts.com

[GruvenParts.com]

GruvenParts.com Die Cut Vinyl Stickers - Free for Orders over $100 !

They're Back In Stock - Bigger and Better !! All Colors Now Available. Dress up your ride with our premium die cut vinyl stickers and enjoy free domestic shipping.

Available in Red, Silver, White and Black.

We ship out a freebie with any order over $100 !

[GruvenParts.com]

www.GruvenParts.com

[alex gee]

Just installed a set of arms on my 04 touareg, fit and finish is outstanding , thanks lads.

[GruvenParts.com]

Just installed a set of arms on my 04 touareg, fit and finish is outstanding , thanks lads.

Excellent! Let us know what else you need, and keep in mind those parts have a lifetime warranty so if anything ever did happen to them just let me know. Take a spin past the VW dealer and tell them how happy you were to NOT spend $800 on more plastic.

[GruvenParts.com]

What else for Touareg ??

www.GruvenParts.com

[Diirk]

Billet grills would be cool, maybe without the vw logo. Powdercoatd black for me.
Maybe a billet tow hook...

[GruvenParts.com]

Hmm that might get pricey ... got a close up pic of the grill?

[Diirk]

[GruvenParts.com]

Yeesh. I donno about a billet grill, it would cost $1,000 (but look pretty sweet)

[Diirk]

Yeah, that's a little pricey.

[GruvenParts.com]

Skid plates though! Still need someone to help us out. Nobody wants a free one?

[alex gee]

One I made recently.

[bspeedracerb]

i know myself as well as a few members of clubtouareg would 100% purchase metal skid plates if they were made available ANYWHERE. I've searched high & low & have not been able to track down anyone who makes these anymore. I'd be willing to be a guinea pig for any test models but I'm a PA local at the moment.

[GruvenParts.com]

Could someone provide me the following :

1. actual skid plate, or cardboard template of design

2. target price


We can certainly make this part, guys. We need some help to get started. Anyone who can provide assistance with design gets a freebie for helping. Please email directly on #1 and please post up on #2.

[GruvenParts.com]

I WANT TO MAKE SOMEONE A FREE METAL SKID PLATE

Please send me dimensions or template and we will do it. Please email

Cmon guys we know you want these things and we can make them for Touareg.