** GruvenParts.com Has Billet G60 Goodies !

[GruvenParts.com]

Corrado Billet Upper "Rad Neck"

www.GruvenParts.com has designed a TIG welded billet version of the Corrado upper radiator neck to replace the weak plastic factory radiator neck prone to cracking and dropping chunks which clog your radiator. We closed the book on this part, and it will never need to be replaced again. "Wife-beater" t-shirt not included.

This part replaces OEM P/N 535-121-647 (535121647) found on all Corrado.

[GruvenParts.com]

Corrado Billet Hood Cable Clip

The Corrado hood release cable clip (mounted to the hood pull bracket near the drivers left knee) is notorious for breaking at the worst possible time -- when you need to open the hood.

Rather than using a cheap stamped version which will break again in short order, our version is precision CNC'd from a solid chunk of aerospace grade billet aluminum and installs in minutes. No need for the time consuming task of removing the ENTIRE cable, this one slips right onto the hood pull bracket and locks in with all supplied fasteners included. VW doesnt even sell the hood clip anymore, but even if you found 1 it would be a waste of time to remove the entire hood cable to put it on, as it would break again in short order. Skip the cobbled together mystery versions floating around as well, ours is designed right! We LOVE Corrado so we're happy to reincarnate it from CNC'd billet.

Fits ALL Corrado and replaces Clip P/N 535-823-567 (535823567) that installs on cable P/N 536-823-531 (536823531)

[GruvenParts.com]

GruvenParts.com

[GruvenParts.com]

GruvenParts.com Die Cut Vinyl Stickers - Free for Orders over $100 !

They're Back In Stock - Bigger and Better !! All Colors Now Available. Dress up your ride with our premium die cut vinyl stickers and enjoy free domestic shipping.

Available in Red, Silver, White and Black.

We ship out a freebie with any order over $100 !

[GruvenParts.com]

www.GruvenParts.com

[ballski]

ok so my hood release cable snapped right at the handle. will yours be all I need to connect the existing metal wire/cable to the handle/lever??? Thanks

[GruvenParts.com]

Can you show me a picture of your cable? I will check and see.

Thanks,

[GruvenParts.com]

Genuine 3K Weave Carbon Fiber w/Adhesive Backing



Genuine 3K Weave Carbon Fiber w/Adhesive Backing

Looking for that trick custom upgrade to push your ride over the top at the shows?? Check out this R-E-A-L 3K Carbon Fiber Weave that we've put on an adhesive backing. We've also applied a clear coat to the Carbon to provide a deep gloss finish. Used for years in the aerospace industry, this genuine 3K carbon fiber with adhesive peel and stick backing adds strength and great looks to most any surface. Ships in (2) 10 inch x 20 inch .022 inch thick pieces.

Sheets can be easily cut with sharp scissors or razors. Makes a great decorative upgrade to any surface. Sheets are fairly flexible and can be adhered to any complex contour without drastic impressions, inside/outside corners or rapidly changing surface features. High heat and low temperature applications should be avoided. Use only where typical plastic tapes would be used.

[GruvenParts.com]

www.GruvenParts.com

[GruvenParts.com]

We're about to release the G60 alt pulleys this week. We need to build more sales on those G60 tensioner pulleys, those things are really nice, havent had hardly any orders for them yet....kinda surprised me.

[GruvenParts.com]

JUST GOT THE G60 ALT PULLEYS IN TODAY !!

They look beautiful, new engraving technique paid off. And boy is this thing super light.

I will have pics and all details hopefully posted tonight. Call if you want to order before this gets put up on site.

Thanks,

[GruvenParts.com]

www.GruvenParts.com

[GruvenParts.com]

Corrado G60 Power Pulleys !

GruvenParts.com has designed CNC billet aluminum Crank, Alternator, and Tensioner pulleys for the Corrado G60 8V Engines. Each pulley is precision machined to a run out of less than .001 on one of our HAAS CNC mill-lathes. The products are completed entirely on the CNC mill, and therefore have a nearly chrome surface finish. Our G60 Pulley Kit reduces rotating mass by over 5 lbs. Added bonus - ditching those cheap plastic factory tensioner wheels!

Buy them as a set and save !!

These pulleys replace the following OEM part numbers :

Crank : 037-105-255 (037105255)
Tens : 074-145-278E (074145278E)
Alt : 037-903-119 (037903119)

[GruvenParts.com]

ALL PARTS IN STOCK !!

www.GruvenParts.com

[GruvenParts.com]

www.GruvenParts.com

[GruvenParts.com]

What other parts are you guys interested in for these cars ??

www.GruvenParts.com

[GruvenParts.com]

Friday bump!

All the parts are in stock, ready to ship

www.GruvenParts.com

[GruvenParts.com]

What other parts do you guys want us to look at

[GruvenParts.com]

bump for a Monday!

www.GruvenParts.com

[GruvenParts.com]

What's in Development Currently ?

1. Audi A4 adjustable front upper control arms - pics will be posted shortly!

2. 02A side/side cable repair block

3. R32/TT front adjustable swaybar end links

4. VR6, 1.8T, 2.0 billet oil dipstick funnels

5. Corrado stainless rear deck lid cables

Much more ... stay tuned

www.GruvenParts.com

[GruvenParts.com]

Stainless rear deck lid cables ... coming soon

[GruvenParts.com]

Corrado Billet Hood Cable Clip

The Corrado hood release cable clip (mounted to the hood pull bracket near the drivers left knee) is notorious for breaking at the worst possible time -- when you need to open the hood.

Rather than using a cheap stamped version which will break again in short order, our version is precision CNC'd from a solid chunk of aerospace grade billet aluminum and installs in minutes. No need for the time consuming task of removing the ENTIRE cable, this one slips right onto the hood pull bracket and locks in with all supplied fasteners included. VW doesnt even sell the hood clip anymore, but even if you found 1 it would be a waste of time to remove the entire hood cable to put it on, as it would break again in short order. Skip the cobbled together mystery versions floating around as well, ours is designed right! We LOVE Corrado so we're happy to reincarnate it from CNC'd billet.

Fits ALL Corrado and replaces Clip P/N 535-823-567 (535823567) that installs on cable P/N 536-823-531 (536823531)

[GruvenParts.com]

www.GRUVENPARTS.COM

[GruvenParts.com]

Let us know what else is needed for G60 !

We have plenty of those billet tensioners and alt pulleys in stock, ready to ship.

www.GruvenParts.com

[GruvenParts.com]

GruvenParts.com Die Cut Vinyl Stickers - Free for Orders over $100 !

They're Back In Stock - Bigger and Better !! All Colors Now Available. Dress up your ride with our premium die cut vinyl stickers and enjoy free domestic shipping.

Available in Red, Silver, White and Black.

We ship out a freebie with any order over $100 !

[GruvenParts.com]

Bump for Billet Parts !!

www.GruvenParts.com

[GruvenParts.com]

Follow our supercharger install thread, there will be an interesting twist at the end ...



http://forums.vwvortex.com/showthrea...r-Build-Thread

[GruvenParts.com]

Billet Audi and VW Washer Fluid Cap

Ditch the ugly blue washer fluid cap (or half tennis ball if you’re really ghetto) with one of these slick billet aluminum 6061-T651 versions.

Ours are CNC machined for a perfect fit and can be ordered in a variety of colors and finishes – including anodized or highly polished. Simply remove the old cap and press fit this one right into the washer tank.

This product replaces OEM P/N 1K0-955-455 (1K0955455), 1H0-955-455 (1H0955455), and fits nearly every VW and Audi in existence. So, there’s no excuse to rock the half tennis ball anymore!

[GruvenParts.com]

Bump for G60 billet tensioners !!

Corrado G60 Power Pulleys !

GruvenParts.com has designed CNC billet aluminum Crank, Alternator, and Tensioner pulleys for the Corrado G60 8V Engines. Each pulley is precision machined to a run out of less than .001 on one of our HAAS CNC mill-lathes. The products are completed entirely on the CNC mill, and therefore have a nearly chrome surface finish. Our G60 Pulley Kit reduces rotating mass by over 5 lbs. Added bonus - ditching those cheap plastic factory tensioner wheels!

Buy them as a set and save !!

These pulleys replace the following OEM part numbers :

Crank : 037-105-255 (037105255)
Tens : 074-145-278E (074145278E)
Alt : 037-903-119 (037903119)

[GruvenParts.com]

Corrado Billet Hood Cable Clip

The Corrado hood release cable clip (mounted to the hood pull bracket near the drivers left knee) is notorious for breaking at the worst possible time -- when you need to open the hood.

Rather than using a cheap stamped version which will break again in short order, our version is precision CNC'd from a solid chunk of aerospace grade billet aluminum and installs in minutes. No need for the time consuming task of removing the ENTIRE cable, this one slips right onto the hood pull bracket and locks in with all supplied fasteners included. VW doesnt even sell the hood clip anymore, but even if you found 1 it would be a waste of time to remove the entire hood cable to put it on, as it would break again in short order. Skip the cobbled together mystery versions floating around as well, ours is designed right! We LOVE Corrado so we're happy to reincarnate it from CNC'd billet.

Fits ALL Corrado and replaces Clip P/N 535-823-567 (535823567) that installs on cable P/N 536-823-531 (536823531)

[RedYellowWhite]

Let us know what else is needed for G60 !

www.GruvenParts.com

^^Billet alloy shifter tower (inside car) bushings to replace the oe nylon ones

[ZachRabbit]

What other parts do you guys want us to look at

cam gears (adjustable and non)
intermediate shaft pulleys
various bracketry (i.e. alternator relocation kit? G60 S/C brackets?)
8V valve covers?

all of those could be offered in anodized finishes?

just some ideas.
looks like the new pulleys are pretty nice btw

[GruvenParts.com]

These are all good ideas.

Who wants any of them? If we get some interest, we will build and let you test free samples.

Thanks for response.

[RedYellowWhite]

These are all good ideas.

Who wants any of them? If we get some interest, we will build and let you test free samples.

Thanks for response.

^^Billet alloy shifter tower (inside car) bushings to replace the oe nylon ones

^^ This is something that should have been fabricated a long time ago IMO and not anything very complicated I reckon... the VR guys already have this option so why not something for us G60 owners

[GruvenParts.com]

Please email with the details and contact info so we can prepare some CAD drawings and post.

Paul@GruvenParts.com

Thanks !