** GruvenParts.com Has Billet G60 Goodies !

[GruvenParts.com]

bump for some billet goodies

[GruvenParts.com]

www.GruvenParts.com

[RedYellowWhite]

^^Billet alloy shifter tower (inside car) bushings to replace the oe nylon ones

^^ This is something that should have been fabricated a long time ago IMO and not anything very complicated I reckon... the VR guys already have this option so why not something for us G60 owners

Please email with the details and contact info so we can prepare some CAD drawings and post.

Paul@GruvenParts.com

Thanks !

I don't know what else could be replaced for a better shifter feel on the G60 but I've read replacing/re-newing the bushings below help quite a bit. Unfortunately they are only available in oe nylon replacements. I don't know if billet alloy replacements would be better...Note this are for the shifter tower inside the vehicle, as early 02A trans (ie. g60) did not have the bracket bushings as opposed to the later VR6 ones.


oe part #s for G60 shifter tower bushings:
- 357 711 124 A (no. 7 on below drawing)
- 357 711 166 A (no. 4 on below drawing)
- 357 711 590 B (no. 39 on below drawing)
- 357 711 590 C (no. 40 on below drawing)
- 357 711 217 (no. 24 on below drawing)


ETKA drawings:










And here's a pic I took from my oe nylon ones (though only 4 of the 5 total bushings):

[GruvenParts.com]

Billet Dipstick Funnel

Finally, a replacement for the orange plastic dipstick funnel !

Our funnel is made from 6061-T6 billet aluminum and neatly replaces the cheap brittle orange dipstick funnel we have all come to hate. Choose from as machined finish or highly polished finish.

This part replaces OEM part number 053-103-663 (053103663) on the following vehicles:

Audi - 80, B5 A4 1.8T – all 4 cylinder
VW – MK2 Golf, Jetta, Scirocco, Corrado G60 (NOT VR6), MK3 ABA’s, Eurovan T4, B3, B4, B5 Passat 1.8T and 2.0

[GruvenParts.com]

www.gruvenparts.com

[Tommy D]

How about making replacement front subframe bushings?

[GruvenParts.com]

How many G60 owners would be interested in this ?

I don't know what else could be replaced for a better shifter feel on the G60 but I've read replacing/re-newing the bushings below help quite a bit. Unfortunately they are only available in oe nylon replacements. I don't know if billet alloy replacements would be better...Note this are for the shifter tower inside the vehicle, as early 02A trans (ie. g60) did not have the bracket bushings as opposed to the later VR6 ones.


oe part #s for G60 shifter tower bushings:
- 357 711 124 A (no. 7 on below drawing)
- 357 711 166 A (no. 4 on below drawing)
- 357 711 590 B (no. 39 on below drawing)
- 357 711 590 C (no. 40 on below drawing)
- 357 711 217 (no. 24 on below drawing)


ETKA drawings:










And here's a pic I took from my oe nylon ones (though only 4 of the 5 total bushings):

[RedYellowWhite]

How many G60 owners would be interested in this ?

Bump

[GruvenParts.com]

Again - how many G60 owners want those bushings ?? Please email me direct, we can certainly make them if there is demand.

[Slowrrado]

im in

[ZachRabbit]

i seriously can't believe there was no interest in any of the things i posted... lol.

[GruvenParts.com]

Guys email me direct if you would. We are tracking this and want a contact list for the bushings

Paul@GruvenParts.com

[ZachRabbit]

Billet Dipstick Funnel

Finally, a replacement for the orange plastic dipstick funnel !

uuuhhh.... how much? this is a pretty freaking good idea.

[ZachRabbit]

Again - how many G60 owners want those bushings ?? Please email me direct, we can certainly make them if there is demand.

i would be interested.
i'd probably be interested in ones for MK3's too if they're practical. i see those needing a lot of lube

[GruvenParts.com]

Thanks, keep posting guys!

[GruvenParts.com]

Corrado G60 Power Pulleys !

GruvenParts.com has designed CNC billet aluminum Crank, Alternator, and Tensioner pulleys for the Corrado G60 8V Engines. Each pulley is precision machined to a run out of less than .001 on one of our HAAS CNC mill-lathes. The products are completed entirely on the CNC mill, and therefore have a nearly chrome surface finish. Our G60 Pulley Kit reduces rotating mass by over 5 lbs. Added bonus - ditching those cheap plastic factory tensioner wheels!

Buy them as a set and save !!

These pulleys replace the following OEM part numbers :

Crank : 037-105-255 (037105255)
Tens : 074-145-278E (074145278E)
Alt : 037-903-119 (037903119)

[GruvenParts.com]

www.GruvenParts.com

[GruvenParts.com]

Corrado Billet Upper "Rad Neck"

www.GruvenParts.com has designed a TIG welded billet version of the Corrado upper radiator neck to replace the weak plastic factory radiator neck prone to cracking and dropping chunks which clog your radiator. We closed the book on this part, and it will never need to be replaced again. "Wife-beater" t-shirt not included.

This part replaces OEM P/N 535-121-647 (535121647) found on all Corrado.

[ratatat]

Im in for some bushings

[GruvenParts.com]

Anyone else on the bushings for G60 ?

[GruvenParts.com]

ABA / Corrado G60 / MK2 Billet Dipstick

www.GruvenParts.com is proud to release these gorgeous Billet Dipsticks to replace both OEM part number 027-115-611C (027115611C) and 051-115-611B (051115611B). Our billet dipstick is CNC’d from a solid block of 6061-T651 aluminum with a stainless steel cable permanently attached. The cable end has a flitting with hash marks to signify oil level min and max.

As an added bonus, this part is made to perfectly fit our Billet Dipstick Funnels and can be ordered as a set to save! If you are ordering the billet funnel with the billet dipstick, please ensure your car uses dipstick funnel OEM P/N 053-103-663 (053103663).

This billet dipstick replaces both OEM part number 027-115-611C (027115611C) and 051-115-611B (051115611B) and fits the following vehicles :

1993-1999 Jetta/Golf/Passat/Cabrio w.2.0 ABA engine
1990-1992 Corrado G60 1.8L
1985-1992 Jetta/Golf/Passat w/1.6L and 1.8L engines

Don’t see your car listed here? Don’t worry! We have many more of these billet dipsticks coming for nearly all makes / models. Visit www.GruvenParts.com for the latest.

[RedYellowWhite]

ABA / Corrado G60 / MK2 Billet Dipstick

www.GruvenParts.com is proud to release these gorgeous Billet Dipsticks to replace both OEM part number 027-115-611C (027115611C) and 051-115-611B (051115611B). Our billet dipstick is CNC’d from a solid block of 6061-T651 aluminum with a stainless steel cable permanently attached. The cable end has a flitting with hash marks to signify oil level min and max.

As an added bonus, this part is made to perfectly fit our Billet Dipstick Funnels and can be ordered as a set to save! If you are ordering the billet funnel with the billet dipstick, please ensure your car uses dipstick funnel OEM P/N 053-103-663 (053103663).

This billet dipstick replaces both OEM part number 027-115-611C (027115611C) and 051-115-611B (051115611B) and fits the following vehicles :

1993-1999 Jetta/Golf/Passat/Cabrio w.2.0 ABA engine
1990-1992 Corrado G60 1.8L
1985-1992 Jetta/Golf/Passat w/1.6L and 1.8L engines

Don’t see your car listed here? Don’t worry! We have many more of these billet dipsticks coming for nearly all makes / models. Visit www.GruvenParts.com for the latest.

^^Very nice I was looking for something like this for a long time
However, I can see the funnel listed for the Corrado G60 on your webstore but not the actual dipstick How much is it and how can I buy one? Will the dipstick work with the oe plastic (orange) funnel or do I need to also buy the one you sell?

TIA
Nick

[BlackSwan]

Added bonus - ditching those cheap plastic factory tensioner wheels!

These pulleys replace the following OEM part numbers :

Tens : 074-145-278E (074145278E)

^

i don't have an etka in front of me to verify that part# but am i safe to assume that your billet g60 tensioner pulleys replaces the two black plastic pulleys on the charger bracket pictured below?

it doesn't replace the tensioner pulley on the side of the block that sits below the cam gear does it?

[GruvenParts.com]

^^Very nice I was looking for something like this for a long time
However, I can see the funnel listed for the Corrado G60 on your webstore but not the actual dipstick How much is it and how can I buy one? Will the dipstick work with the oe plastic (orange) funnel or do I need to also buy the one you sell?

TIA
Nick

Nick you can click the picture to go to product page, or go to MK2 section of our site, its listed now

Regarding G60 tenisoners we sell - those are just for the serpentine belt, not the timing belt. So, the tensioners we sell are to replace plastic ones shown in the picture of the bracket assy.

Any questions call or email.

Thanks

[RedYellowWhite]

Nick you can click the picture to go to product page, or go to MK2 section of our site, its listed now

Any questions call or email.

Thanks

PM'd

[r32flow]

I would really like to see an alternater relocation brackets simular to these. This is perfect and would also be a really cheap part to make.

http://forums.vwvortex.com/showthrea...y-16Vg60-build

[bugnuts]

Im in for some bushings

^

[GruvenParts.com]

^

i don't have an etka in front of me to verify that part# but am i safe to assume that your billet g60 tensioner pulleys replaces the two black plastic pulleys on the charger bracket pictured below?

it doesn't replace the tensioner pulley on the side of the block that sits below the cam gear does it?

The G60 tensioners we sell are made from billet aluminum and replace the cheap G60 Plastic ones :


Corrado G60 Power Pulleys !

GruvenParts.com has designed CNC billet aluminum Crank, Alternator, and Tensioner pulleys for the Corrado G60 8V Engines. Each pulley is precision machined to a run out of less than .001 on one of our HAAS CNC mill-lathes. The products are completed entirely on the CNC mill, and therefore have a nearly chrome surface finish. Our G60 Pulley Kit reduces rotating mass by over 5 lbs. Added bonus - ditching those cheap plastic factory tensioner wheels!

Buy them as a set and save !!

These pulleys replace the following OEM part numbers :

Crank : 037-105-255 (037105255)
Tens : 074-145-278E (074145278E)
Alt : 037-903-119 (037903119)

[GruvenParts.com]

www.gruvenparts.com

[RCorrado77]

Will you be stocking the carbon fiber w/ adhesive backing again?

[GruvenParts.com]

didnt have much demand for that, we can probably get more if you want it. Send me an email and let me know how much you want of it.

Thanks

[RCorrado77]

Email sent, thanks

[GruvenParts.com]

Corrado Billet Hood Cable Clip

The Corrado hood release cable clip (mounted to the hood pull bracket near the drivers left knee) is notorious for breaking at the worst possible time -- when you need to open the hood.

Rather than using a cheap stamped version which will break again in short order, our version is precision CNC'd from a solid chunk of aerospace grade billet aluminum and installs in minutes. No need for the time consuming task of removing the ENTIRE cable, this one slips right onto the hood pull bracket and locks in with all supplied fasteners included. VW doesnt even sell the hood clip anymore, but even if you found 1 it would be a waste of time to remove the entire hood cable to put it on, as it would break again in short order. Skip the cobbled together mystery versions floating around as well, ours is designed right! We LOVE Corrado so we're happy to reincarnate it from CNC'd billet.

Fits ALL Corrado and replaces Clip P/N 535-823-567 (535823567) that installs on cable P/N 536-823-531 (536823531)

[GruvenParts.com]

Bump for G60 goods

The G60 tensioners we sell are made from billet aluminum and replace the cheap G60 Plastic ones :


Corrado G60 Power Pulleys !

GruvenParts.com has designed CNC billet aluminum Crank, Alternator, and Tensioner pulleys for the Corrado G60 8V Engines. Each pulley is precision machined to a run out of less than .001 on one of our HAAS CNC mill-lathes. The products are completed entirely on the CNC mill, and therefore have a nearly chrome surface finish. Our G60 Pulley Kit reduces rotating mass by over 5 lbs. Added bonus - ditching those cheap plastic factory tensioner wheels!

Buy them as a set and save !!

These pulleys replace the following OEM part numbers :

Crank : 037-105-255 (037105255)
Tens : 074-145-278E (074145278E)
Alt : 037-903-119 (037903119)

[GruvenParts.com]

GruvenParts.com Die Cut Vinyl Stickers - Free for Orders over $100 !

They're Back In Stock - Bigger and Better !! All Colors Now Available. Dress up your ride with our premium die cut vinyl stickers and enjoy free domestic shipping.

Available in Red, Silver, White and Black.

We ship out a freebie with any order over $100 !