Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Page 2 of 4 FirstFirst 1234 LastLast
    Results 36 to 70 of 106

    Thread: ** GruvenParts.com Has Billet Goodies for Your Manual Trans !

    1. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      01-18-2011 03:05 PM #36


      Billet 12V VR6 Drive Belt Pulleys - All 12V VR6

      GruvenParts.com offers a complete set of ultra sleek lightweight 12V VR6 power pulleys. These include lightweight billet crank, power steering, water pump, tensioner, and alternator pulleys for your 12V VR6 engine. These pulleys are precision CNC'd from aircraft grade billet aluminum and reduce the rotating mass by a whopping 8.5 lbs! All pulleys with exception of power steering pulley ARE NORMAL DRIVE (NOT UNDER-DRIVE). Our testing has determined that ONLY the power steering pulley should be under-driven (slightly). All other pulleys in the system rotate at the OEM speed. These pulleys will not change the speed of the supercharger and will not void any supercharger warranties.

      Buy them as a set and save!

      These pulleys replace the following OEM part numbers :

      Crank Pulley : 021-105-243 (021105243)
      Tensioner Pulley: 021-145-299 (021145299)
      Water Pump Pulley: 021-121-031A (021121031A)
      Alternator Pulley:
      Power Steering Pulley : 021-145-255 (021145255)

    2. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      01-31-2011 11:39 AM #37

      A4/B5 Front Adjustable Control Arms

      Audi A4/S4/RS4/A6/RS6 and VW Passat B5 Adjustable Front Upper Control Arms

      BY FAR – THE BEST VALUE IN ADJUSTABLE CONTROL ARMS ON THE MARKET !


      You asked GruvenParts.com for affordable, bulletproof, and fully rebuildable Audi A4/S4/RS4/A6/RS6 and VW Passat B5 Adjustable Front Upper Control Arms and we have delivered!

      Just like the GruvenParts.com popular TT/R32 rear adjustable control arms, we designed these based on years of fabricating rock crawler suspension systems for racers and weekend warriors alike. They are made from a special aircraft grade of 4130 chrominum-molybdenum alloy and then powder coated in high gloss black for maximum durability. The AMERICAN MADE racing heim joints are CAD plated, PTFE lined, and can be ordered with dust boots all around for those planning to re-enact a Grouppe B Ralley race. Finally, all parts are fully rebuildable.

      Don’t waste your hard earned money with the over-priced competitor versions. The quality and performance of the GruvenParts.com adjustable upper control arms are second to none!

      These come as a set of 4 and fit the following models :

      Audi A4/S4/RS4 – 1996-2008 (B5, B6, B7, C5)
      Audi A6/RS6 (incl. AllRoad) - 1998-2004
      VW Passat - 1998-2005

      This product replaces OEM Part Numbers 8E0-407-505C, 8E0-407-505A, 8E0-407-506C, 8E0-407-506A, 8E0-407-509C, 8E0-407-509A, 8E0-407-510A (and possibly others). (8E0407505C, 8E0407505A, 8E0407506C, 8E0407506A, 8E0407509C, 8E0407509A, 8E0407510A)

    3. Member fgrosso5's Avatar
      Join Date
      Jul 16th, 2010
      Location
      pottstown
      Posts
      228
      Vehicles
      70 squareback, 01 volvo xc70, 99 jetta wolf
      01-31-2011 10:36 PM #38
      in my mk3 2.0, I've been getting more slop into 2nd, sometimes just goes into neutral. Would your kit fix this issue? so for a newbie question. Thanks

    4. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      02-02-2011 09:33 AM #39
      Our shift kit is only for an 02A trans, is that what you are running in your ABA ?

    5. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      02-10-2011 09:10 AM #40


      Billet VR6 Crack Pipes for ALL VR6 Engines Corrado thru R32!

      DOES NOT COME WITH CHEAP THIN WALL TAPPED FITTINGS LIKE OTHER LESSER PIPES !!

      12V and 24V VR6 Coolant Pipes aka Crack Pipes

      Ours are completely tig welded by our licensed commercial jet aircraft repair facility! We were the 1st to build this part and its what started us off! If you have a billet crack pipe in your VR6, chances are it was made by http://www.GruvenParts.com. Hand crafted in our Aerospace shop using O-rings from the Boeing 777, proven by many hours of track time, it's the highest quality crack pipe you can buy. It's on all of our track cars and has withstood countless hours of track abuse! The 12V version replaces OEM p/n 021-121-050C (021121050C) and the 24V version replaces OEM p/n 022-121-050 (022121050).


    6. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      02-21-2011 11:45 AM #42

      TT/R32 Rear Adjustable Control Arms

      Got a lowered TT or R32 ? Then you already know how the camber and toe become completely out of sorts, causing poor handling and expensive tire wear the more its lowered. Don't fret, GruvenParts.com has your solution.

      We are proud to release these adjustable upper and lower rear control arms made from indestructible 4340 aircraft steel tubing. These high quality arms include greaseable heim joints and bulletproof welds. Each control arm provides up to 2 FULL INCHES of adjustment ON THE CAR (does not require removal for adjustment of both camber and toe).

      We know the economy is tough right now, so we are offering these at prices well under our competition. Buy 2 sets and save !!!

      This product fits Audi TT (2001-2006), Audi A3/S3, VW R32 (2004), VW Golf 4motion and 4motion Variant, VW Bora 4motion and 4motion Variant and replaces P/N 1J0-505-323L (1J0505323L) and 1J0-505-323N (1J0505323N).

      Want further discounts and more great products from GruvenParts.com? Read on!


      TT/R32 Rear Adjustable Sway Bar End Linkages

      Got a lowered TT or R32 ? Then you need to be able to adjust your rear stabilizer bar end links to ensure the linkages ride perpendicular to the swaybar and correct the less than ideal handling typical of lowered set ups. The factory set up does not provide any adjustability in the swaybar end links but GruvenParts.com has you covered!

      Our adjustable end links are made from aerospace grade 6061-T651 aluminum hex and feature 2 full inches of adjustment ON THE CAR. This makes for very quick and easy length adjustment on both the top and bottom of the linkage to completely fine tune just about any suspension set up. Our linkages utilize high quality greaseable heim joints for many years of smooth and quiet operation. While we recommend using our fully adjustable rear control arms, you can install these end links without them. The main body is show quality powder coated jazz blue to match our control arms, and like all of our parts they are made right here in Atlanta, Georgia by our FAA approved commercial jet aviation machine shop on state of the art HAAS mills and lathes. You wont find higher quality anywhere!

      This product fits Audi TT (2001-2006), Audi A3/S3, VW R32 (2004), VW Golf 4motion and 4motion Variant, VW Bora 4motion and 4motion Variant and replaces OEM linkage P/N 1J0-505-466B (1J0505466B).

      Please note : This product is sold in sets of 2 (1 for each side) and includes all required spacers and the upper bolt/lock nut. Re-use existing lower bolt.

    7. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      03-07-2011 04:54 PM #43
      What other parts do you guys want ? Email, PM, or post please

      www.GruvenParts.com

    8. Member jimivr6's Avatar
      Join Date
      Feb 18th, 2003
      Location
      ft lauderdale, fl
      Posts
      737
      Vehicles
      2 92 corrado slc,97 gti,01 cabrio,97 cabrio
      03-20-2011 05:08 PM #44
      can you show all your parts installed ? especially the shifter parts.

    9. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      03-21-2011 02:59 PM #45
      I dont have any installed pics of the shift parts handy but I can walk you thru it, call or email. Its pretty straight fwd!

      Thanks,

    10. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      03-22-2011 10:57 AM #46


      A4 / Passat 1.8T Billet Dipstick

      www.GruvenParts.com is proud to release these gorgeous Billet Dipsticks to replace OEM part number 053-115-611C (053115611C). Our billet dipstick is CNC’d from a solid block of 6061-T651 aluminum with a stainless steel cable permanently attached. The cable end has a flitting with hash marks to signify oil level min and max.

      As an added bonus, this part is made to perfectly fit our Billet Dipstick Funnels and can be ordered as a set to save! If you are ordering the billet funnel with the billet dipstick, please ensure your car uses dipstick funnel OEM P/N 053-103-663 (053103663).

      This billet dipstick replaces OEM part number 053-115-611C (053115611C) and fits the following vehicles :

      1996 - 2002 Audi A4/S4/Avant Quattro 1.8T (AEB)
      1998 – 2001 VW Passat 1.8T (AEB)
      1988 – 1992 Audi 80/90
      1982 – 1987 Audi 4000
      1987 – 1993 VW Fox
      1982 - 1985 VW Quantum 1.8L

      Don’t see your car listed here? Don’t worry! We have many more of these billet dipsticks coming for nearly all makes / models. Visit www.GruvenParts.com for the latest.

    11. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      03-28-2011 01:35 PM #47
      Bump for billet goodness and lots more is on the way !

      www.GruvenParts.com

      Our TT/R32 + A4/Passat Adjustable control arms are now available fully booted for extreme environments.


      TT/R32 Rear Adjustable Control Arms



      A4/B5 Front Adjustable Control Arms

    12. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      04-05-2011 02:18 PM #48


      ABA / Corrado G60 / MK2 Billet Dipstick

      www.GruvenParts.com is proud to release these gorgeous Billet Dipsticks to replace both OEM part number 027-115-611C (027115611C) and 051-115-611B (051115611B). Our billet dipstick is CNC’d from a solid block of 6061-T651 aluminum with a stainless steel cable permanently attached. The cable end has a flitting with hash marks to signify oil level min and max.

      As an added bonus, this part is made to perfectly fit our Billet Dipstick Funnels and can be ordered as a set to save! If you are ordering the billet funnel with the billet dipstick, please ensure your car uses dipstick funnel OEM P/N 053-103-663 (053103663).

      This billet dipstick replaces both OEM part number 027-115-611C (027115611C) and 051-115-611B (051115611B) and fits the following vehicles :

      1993-1999 Jetta/Golf/Passat/Cabrio w.2.0 ABA engine
      1990-1992 Corrado G60 1.8L
      1985-1992 Jetta/Golf/Passat w/1.6L and 1.8L engines

      Don’t see your car listed here? Don’t worry! We have many more of these billet dipsticks coming for nearly all makes / models. Visit www.GruvenParts.com for the latest.


    13. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      05-12-2011 02:00 PM #50


      Billet 12V VR6 Drive Belt Pulleys - All 12V VR6

      GruvenParts.com offers a complete set of ultra sleek lightweight 12V VR6 power pulleys. These include lightweight billet crank, power steering, water pump, tensioner, and alternator pulleys for your 12V VR6 engine. These pulleys are precision CNC'd from aircraft grade billet aluminum and reduce the rotating mass by a whopping 8.5 lbs! All pulleys with exception of power steering pulley ARE NORMAL DRIVE (NOT UNDER-DRIVE). Our testing has determined that ONLY the power steering pulley should be under-driven (slightly). All other pulleys in the system rotate at the OEM speed. These pulleys will not change the speed of the supercharger and will not void any supercharger warranties.

      Buy them as a set and save!

      These pulleys replace the following OEM part numbers :

      Crank Pulley : 021-105-243 (021105243)
      Tensioner Pulley: 021-145-299 (021145299)
      Water Pump Pulley: 021-121-031A (021121031A)
      Alternator Pulley:
      Power Steering Pulley : 021-145-255 (021145255)

    14. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      05-16-2011 02:55 PM #51
      These are back in stock (in super gloss black) and ready to go!


      TT/R32 Rear Adjustable Control Arms

      www.GruvenParts.com

    15. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      05-23-2011 08:52 AM #52
      GruvenParts.com has released this billet intake drive unit arm for ALL VW/Audi VR6 engines with variable intake manifolds!


      Billet Intake Manifold Drive Unit Linkage!

      This part replaces the white plastic part that attaches to the actuator arm. The OEM part is made from injection molded nylon and becomes very brittle in the engine heat. Of course VW/Audi will not sell you *JUST* this part, you would have to buy a whole new drive unit for big bucks and get a bunch of stuff you don’t need.

      GruvenParts.com builds these the way VW should have: from a solid chunk of 6061-T651 aircraft grade aluminum on a 4 axis HAAS mill-lathe. Utilizing some tricks within the SolidWorks/MasterCam CNC software, we have tweaked the process to allow the billet part to be machined specially to accept the locking feature on the end of the intake rod. Just push fit this part onto the end of the intake rod similar to OEM plastic part fitment. There are no set screws to come loose and the fit is perfect.

      This part makes a great upgrade when installing our upgraded MKIV VR6 Intake Manifold Bushings

      Our part will also cost you about 1/3 what VW/Audi charge for their plastic drive unit (and the OEM plastic part is NOT part of their repair kit). This one is a no brainer!

      You guys asked us for it and we listened. Another great billet replacement part to rid your VW/Audi of the weak plastic parts!

      Don’t forget to check out the DIY listed on our website.

      Applications:
      2.8L 12 V VR6 ENGINE - with AFP Engine Code (99-02 Golf/Jetta VR6) to replace the drive unit linkage p/n 071-133-759D (071133759D) on OEM VW rod p/n 021-133-653 (021133653)

      2.8L 24 V VR6 ENGINE - BDF Engine Code (02 - present Golf/Jetta VR6) to replace the drive unit linkage p/n 022-133-759 (022133759) on OEM VW rod p/n 022-133-653 (022133653)

      3.2L 24V VR6 Engines - 04 R32, 3.2 Touareg, 3.2 Eos, 3.2 A3, 3.2 TT to replace the drive unit linkage p/n 022-133-759A (022133759A) on rod p/n 022-133-653B (022133653B)


    16. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      06-10-2011 11:18 AM #54


      Billet VR6 Crack Pipes for ALL VR6 Engines Corrado thru R32!

      MACHINED FROM 6061-T651 ALUMINUM TO EXACTLY MATCH OEM PIPE DIMENSIONS - OURS DOES NOT COME WITH CHEAP THIN WALLED TAPPED FITTINGS LIKE OTHER LESSER PIPES !!

      12V and 24V VR6 Coolant Pipes aka Crack Pipes

      GruvenParts.com was the 1st to build this part and it’s what started us off! We manufacture this pipe EXACTLY to match the OEM part shape so there is NEVER a fitment issue. Be careful when considering other billet pipes which do not match the exact shape of the OEM pipe. The fitment of this part is tricky and the shape MUST BE IDENTICAL to the OEM part to ensure correct alignment between the water pump and thermo housing.

      If you have a billet crack pipe in your VR6, chances are it was made by us. Hand crafted in our Aerospace shop using O-rings from the Boeing 777, proven by many hours of track time, it's the highest quality crack pipe you can buy. It's on all of our track cars and has withstood countless hours of track abuse! Our pipe has a modular design which allows you to plug the oil cooler feed line with a ¼ NPT plug if installing an external oil cooler. Ours can also be ordered with a chrome plated drain valve for quick and clean coolant flushes. The pipe can also be ordered with a brilliant chrome finish for those seeking the ultimate engine bay bling!

      If you dont want to do this job again, buy the LIFETIME WARRANTED GruvenParts.com billet CrackPipe !

      Make sure to see our website for the complete installation DIY

      The 12V version replaces OEM p/n 021-121-050C (021121050C) found in 12V VR6 : VW Corrado, Golf, Jetta, Passat, and Eurovan.
      The 24V version replaces OEM p/n 022-121-050 (022121050) found in 24V VR6 : VW R32, Golf, Jetta, Eurovan, EOS, Audi : 3.2L V6 TT and A3

    17. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      06-16-2011 11:49 AM #55


      AAA VR6 Billet Dipsticks

      www.GruvenParts.com is proud to release this Billet Dipstick for all AAA VR6 Corrado, Golf, Jetta, and Passat!

      The gorgeous dipstick is CNC’d from a chunk of aerospace grade aluminum and contains 2 chemically resistant O-rings for a perfect fit and seal.

      Get rid of the ugly plastic dipstick and replace with our billet version!

      This part replaces the dipstick on AAA VR6 engines found on Corrado VR6, MK3 Golf, Jetta, and Passat with OEM dipstick p/n 021115607 and OEM tube p/n 021115629E.

    18. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      06-29-2011 02:25 PM #56


      Billet MK4 1.8T Golf/Jetta, TT Dipstick Funnel


      GruvenParts.com is proud to release these gorgeous Billet Dipsticks to replace OEM part number 06A-115-611Q (06A115611Q) and 06B-115-611R (06B115611R) for the Audi TT MKI 1.8T, and VW MKIV 1.8T Golf and Jetta.

      Our billet dipstick is CNC’d from a solid block of 6061-T651 aluminum with a stainless steel cable permanently attached. The cable end has a fitting with hash marks to signify oil level min and max.

      As an added bonus, this part is made to perfectly fit our 1.8T Billet Dipstick Funnels and can be ordered as a set to save! If you are ordering the billet funnel with the billet dipstick, please ensure your car uses dipstick funnel OEM P/N 06A-103-663B (06A103663B)

      This billet dipstick/funnel combo replaces OEM part number 06A-115-611Q (06A115611Q) and 06B-115-611R (06B115611R) dipstick and OEM P/N 06A-103-663B (06A103663B) funnel and fits the following vehicles :

      Audi TT - MK1 w/1.8T engine

      VW Golf, Jetta, and New Beetle - MKIV 1.8T w/1.8T engine

    19. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      07-06-2011 10:09 AM #57

      Audi/VW 4.2V8 Intake Linkage Arms !

      GruvenParts.com 4.2L V8 Intake Manifold Linkage Arms Warranted for Life !

      Got a 4.2L V8 Audi or VW ? Then you had better check your intake manifold actuator arms Audi/VW P/N 077-198-327A (077198327A)! The OEM plastic versions quickly break, leaving your intake manifold rod stuck which causes poor idle, drivability, loss of power, and poor fuel mileage. This is a very common problem on the Audi/VW 4.2L V8, an otherwise great engine. The dealer will only sell you a repair kit for nearly $400, and each repair kit only comes with 1 of each length linkage arm. If your vechicle has 2 broken linkage arms, you would need to buy 2 dealer repair kits (cost nearly $800)!

      Our Billet intake manifold arms are made from aerospace grade 6061-T651 aluminum with specially machined black Delrin inserts to provide a perfect fit to the actuator balls. These parts are warrantied for life!

      Dont go to the VW/Audi dealer and pay upwards of $400 for the new actuator kit when all you need are the arms (the actuators themselves rarely fail). And DONT pay that kind of money for another set of plastic arms that will break in quick order.

      Go with GruvenParts.com and NEVER WORRY ABOUT THIS AGAIN !

      Fits the following vehicles:

      2004-2007 VW Phaeton V8
      2003+ VW Touareg V8
      2002-2004 Audi A6/Avant
      1998-2004 Audi A6/S6 Quattro
      2000+ Audi A8/S8 Quattro

      Replaces OEM P/N 077198327A (077-198-327A)

    20. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      07-11-2011 08:50 AM #58


      MK3 Golf/Jetta Billet Radiator Cover

      Replace your plastic MK3 Golf or Jetta radiator fan cover - OEM P/N 1HM-121-343A (1HM121343A) with this machined billet aluminum version. Our part installs in minutes to give your engine bay the attention it deserves!

      Ours is CNC'd from aerospace grade billet aluminum and sculpted to fit the contours of the MK3 Golf and Jetta engine bay perfectly.

      Available in CNC machined finish or chrome plated. Custom engraving options are available. Send us an image of your desired engraving and we will quote it - Paul@GruvenParts.com.

      Fits all 1993-1999 MK3 Golf and Jetta and replaces OEM P/N 1HM-121-343A (1HM121343A)


    21. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      07-25-2011 11:35 AM #60
      Bump for more billet parts !


      Quote Originally Posted by GruvenParts.com View Post
      These are back in stock (in super gloss black) and ready to go!


      TT/R32 Rear Adjustable Control Arms

      www.GruvenParts.com


    22. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      09-06-2011 03:54 PM #62


      Billet 12V VR6 Drive Belt Pulleys - All 12V VR6

      GruvenParts.com offers a complete set of ultra sleek lightweight 12V VR6 power pulleys. These include lightweight billet crank, power steering, water pump, tensioner, and alternator pulleys for your 12V VR6 engine. These pulleys are precision CNC'd from aircraft grade billet aluminum and reduce the rotating mass by a whopping 8.5 lbs! All pulleys ARE NORMAL DRIVE (NOT UNDER-DRIVE). These pulleys will not change the speed of the supercharger and will not void any supercharger warranties.

      Buy them as a set and save!

      These pulleys replace the following OEM part numbers :

      Crank Pulley : 021-105-243 (021105243)
      Tensioner Pulley: 021-145-299 (021145299)
      Water Pump Pulley: 021-121-031A (021121031A)
      Alternator Pulley: 021-903-119 (021903119)
      Power Steering Pulley : 021-145-255 (021145255)

    23. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      09-12-2011 04:33 PM #63


      2.0L BPY Engine Billet Dipsticks

      GruvenParts.com is proud to release these unbreakable Billet Aluminum Dipsticks to replace OEM part number 06F-115-611F (06F115611F) for the Audi A3, TT, Volkswagen EOS, Golf, Jetta, Passat, and Rabbit. See the complete application list below.
      We’re all well aware that the OEM’s cheap orange plastic dipstick on these engines has a small clip that breaks off the 2nd time you check your oil. The broken plastic pieces commonly fall down the oil dipstick tube resulting in contamination in the oil pan. Once broken, the OEM plastic dipstick flops around on the tube causing vacuum and oil leaks, drivability issues, and a big mess.

      GruvenParts.com has ended all that plastic silliness by releasing these high quality dipsticks machined from billet aluminum with a specially sized O-ring. The O-ring creates a tight seal against the tube and will last far longer than the cheesy orange plastic version (while looking a whole lot better!).

      Our billet dipstick is CNC’d from a solid block of 6061-T651 aluminum with a stainless steel cable permanently attached. The cable end has a fitting with hash marks to signify oil level min and max.

      This billet aluminum dipstick replaces OEM P/N 06F-115-611F (06F115611F) on OEM tube P/N 06F-103-663H (06F103663H) and fits the following vehicles :

      2006-2008 Audi A3 2.0L Sportback BPY
      2009 Audi TT 2.0L BPY

      2007-2008 Volkswagen EOS 2.0L BPY
      2008 Volkswagen Golf 2.0L BPY
      2005-2007 Volkswagen Jetta 2.0L (including GLI) BPY
      2006-2008 Volkswagen Passat 2.0T Sedan BPY
      2006-2008 Volkswagen Rabbit 2.0L GTI Turbo BPY

    24. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      09-20-2011 09:50 AM #64

      A4/B5 Front Adjustable Control Arms

      Audi A4/S4/RS4/A6/RS6 and VW Passat B5 Adjustable Front Upper Control Arms

      BY FAR – THE BEST VALUE IN ADJUSTABLE CONTROL ARMS ON THE MARKET !


      You asked GruvenParts.com for affordable, bulletproof, and fully rebuildable Audi A4/S4/RS4/A6/RS6 and VW Passat B5 Adjustable Front Upper Control Arms and we have delivered!

      Just like the GruvenParts.com popular TT/R32 rear adjustable control arms, we designed these based on years of fabricating rock crawler suspension systems for racers and weekend warriors alike. They are made from a special aircraft grade of 4130 chrominum-molybdenum alloy and then powder coated in high gloss black for maximum durability. The heim joints are CAD plated, PTFE lined for quiet operation, and can be ordered with dust boots all around for those planning to re-enact a Grouppe B Ralley race. All parts are fully rebuildable.

      Don’t waste your hard earned money with the over-priced competitor versions. The quality and performance of the GruvenParts.com adjustable upper control arms are second to none!

      These come as a set of 4 and fit the following models :

      Audi A4/S4/RS4 – 1996-2008 (B5, B6, B7, C5)
      Audi A6/RS6 (incl. AllRoad) - 1998-2004
      VW Passat - 1998-2005

      This product replaces OEM Part Numbers 8E0-407-505C, 8E0-407-505A, 8E0-407-506C, 8E0-407-506A, 8E0-407-509C, 8E0-407-509A, 8E0-407-510A (and possibly others). (8E0407505C, 8E0407505A, 8E0407506C, 8E0407506A, 8E0407509C, 8E0407509A, 8E0407510A)

    25. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      10-03-2011 10:19 AM #65


      Guys, the GB has ended on these control arms, however, we can always start another


      A4/B5 Front Adjustable Control Arms

      Audi A4/S4/RS4/A6/RS6 and VW Passat B5 Adjustable Front Upper Control Arms

      Audi A4/S4/RS4 – 1996-2008 (B5, B6, B7, C5)
      Audi A6/RS6 (incl. AllRoad) - 1998-2004
      VW Passat - 1998-2005

      This product replaces OEM Part Numbers 8E0-407-505C, 8E0-407-505A, 8E0-407-506C, 8E0-407-506A, 8E0-407-509C, 8E0-407-509A, 8E0-407-510A (and possibly others). (8E0407505C, 8E0407505A, 8E0407506C, 8E0407506A, 8E0407509C, 8E0407509A, 8E0407510A)


      For 10 orders, we can offer price of $409.99, please note this INCLUDES the racing grade dust boots to protect the heims.

      If you want in on the GB, email or post up here your contact details.

      Thanks!

      Paul@GruvenParts.com

      www.GruvenParts.com


    26. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      10-17-2011 11:39 AM #66


      Billet VR6 Crack Pipes for ALL VR6 Engines Corrado thru R32!

      DOES NOT COME WITH CHEAP THIN WALL TAPPED FITTINGS LIKE OTHER LESSER PIPES !!

      12V and 24V VR6 Coolant Pipes aka Crack Pipes

      Ours are completely tig welded by our licensed commercial jet aircraft repair facility! We were the 1st to build this part and its what started us off! If you have a billet crack pipe in your VR6, chances are it was made by http://www.GruvenParts.com. Hand crafted in our Aerospace shop using O-rings from the Boeing 777, proven by many hours of track time, it's the highest quality crack pipe you can buy. It's on all of our track cars and has withstood countless hours of track abuse! The 12V version replaces OEM p/n 021-121-050C (021121050C) and the 24V version replaces OEM p/n 022-121-050 (022121050).

    27. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      10-27-2011 10:15 AM #67


      Billet Dipstick Funnel

      A Billet Replacement for the Dreaded 1.8T Dipstick Funnel Has Arrived !!

      This one is made from 6061-T6 billet aluminum and neatly replaces the cheap brittle orange dipstick funnel we have all come to hate.

      This part replaces OEM P/N 06A-103-663B (06A103663B) on the following vehicles :

      MK1 Audi TT 1.8T, MKIV Golf 1.8T, MKIV Jetta 1.8T, and New Beetle 1.8T

      Be sure to check your OEM part number to verify it is 06A-103-663B as VW and Audi have made several variations of the worthless orange dipstick tube.

      Forget about ever breaking your 1.8T dipstick tube again !!

    28. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      11-14-2011 12:59 PM #68

      MK2 / MK3 Billet Fuel Line Support Brackets

      Billet fuel line support brackets (set of 2) to replace the weak plastic clips that are probably long gone on your MK2 and MK3 VR6. Ours are CNC'd from billet aluminum to perfectly match the size and shape of your VR6 fuel lines. Mount directly to the head in place of existing plastic supports and install with supplied aerospace grade stainless fasteners. Dont leave your VR6 fuel lines loose and rubbing against hot engine components! These will take more abuse than you can dish out, guaranteed!!

      Can be chrome plated for those seeking even more engine bay bling.

      Fits all MK2 and MK3 VR6 - Jetta, GTI, Passat, and Corrado. Includes stainless bracket hardware, re-use existing 10mm nuts to bolt to head. Brackets replace OEM P/N 021-133-827 (021133827) Bracket and P/N 021-133-687A (021133687A) clip.

    29. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      18,329
      Vehicles
      Too many to list !
      12-06-2011 11:54 AM #69
      A4 and A6 owners with the 3.0L V6 engine, could you please check out this thread and respond -

      http://forums.vwvortex.com/showthrea...ge-Arms-FEELER

      As many of you know, GruvenParts.com specializes in machining all types of more durable engine and suspension components.

      One such item is the Audi/VW 4.2L V8 intake links -


      Audi/VW 4.2V8 Intake Linkage Arms !

      Im wondering if owners of the 2002-2006 A4/S4/A4 Quattro and 2002-2004 A6/A6 quattro with the 3.0L V6 engine (code AVK) would also be interested in having us design metal linkage arms in a similar fashion.

      The Audi part number on the V6 engine is 06C-133-611 (06C133611) drive unit w/rotary valve which is installed onto 06C-133-201J (06C133201J) intake manifold.

      These intake manifolds also have plastic arms which tend to break and of course Audi is only too happy to sell you an entire drive unit at a cost of $400+ when all you really need are more durable linkage arms. See these pictures :






      So, with all that background presented, can you A4/A6 owners with the 3.0L V6 engine have a look at your intake drive unit and inspect the arms and let us know if they are broken? Can you also comment on if you would like to see GruvenParts.com release a billet aluminum version of those actuator arms with a lifetime warranty ?

      Please feel free to email us directly with your thoughts / interest in this idea. Our aim is to provide durable replacements for the parts which are prone to breaking!

      www.GruvenParts.co

      Paul@GruvenParts.com






      Thanks!

    30. Member ReUnitingMyGTI's Avatar
      Join Date
      May 11th, 2011
      Location
      Reading, PA
      Posts
      174
      Vehicles
      90 Gli VR6
      12-12-2011 07:47 PM #70
      Hey guys, not trying to sound like a noob, but I just recently purchased a 1990 jetta gli with a complete vr6 swap from a mk3 passat. As far as I know it has the trans and shift linkage from the passat also. So my question is would the billet short shift kit and repair block work with this setup? Any help would be greatly appriciated.

      Thanks,
      James

    Page 2 of 4 FirstFirst 1234 LastLast

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •