*** IE now offering BILLET aluminum breather adapters!!***

[DarkSideGTI]

Red is IE's signature color.

[Richard_Cranium]

Red is IE's signature color.

ya, it seems like it for sure.

[schwartzmagic]

Red is IE's signature color.

lol

Spray bomb it is.

[DarkSideGTI]

lol

Spray bomb it is.

You can't even see the block breather adapter after being installed. It's kinda hard to offer many colors when you do smaller runs than people like TiAl. The tensioner is available in raw silver or red anodize.

[Dave@integrated]

[kkkustom]

Perfect timing... I will order one up as soon.

As for the people who dont want to see 1.5mm's worth of red down there... Buy a can of Heavy Duty Oven Cleaner. get a glass jelly jar put the anodized part in it and spray the crap out of it with the oven cleaner. it will strip the ano' finish to bare aluminum.

[SR-71]

A
e
b
?

It works fine on AEB.

[Cassidy@Integrated]

It works fine on AEB.

[Dave@integrated]

Plenty in stock!

[Dave@integrated]

[Cassidy@Integrated]

[velocity196]

these are cool i think i've seen them somewhere else before just not that color nice parts

yeah! those are scott and rays brought to the community by issam with a different top

[pete@integrated]

Go figure.

[Dave@integrated]

[Cassidy@Integrated]

[Cassidy@Integrated]

[Cassidy@Integrated]

Hope everyone had a great Thanksgiving!

[groggory]

I think it'd be nice to include the o-ring with the adapter. I had to dig one out of my o-ring kit when I put my IE breather adapter in.

[Cassidy@Integrated]

I think it'd be nice to include the o-ring with the adapter. I had to dig one out of my o-ring kit when I put my IE breather adapter in.

In most cases, the OEM o-ring is intact and can be reused.

[xXGti2006Xx]

I have one question for anyone who has this installed on their vehicle or if ie has knowledge of this issue i have. I personally have the 034 breather adapter, i got it over a year ago when that was the only avail option besides stock, only problem is it is not a great fit. The seal and diameter is correct however there is vertical play with the stock clip so there is never a tight seal because of the adapter wanting to lift up. Its as if 034 did not make the proper height for the adapter for the clip to hold the piece down. Is there any vertical play with your adapter because i would like to resolve this issue

[groggory]

I have one question for anyone who has this installed on their vehicle or if ie has knowledge of this issue i have. I personally have the 034 breather adapter, i got it over a year ago when that was the only avail option besides stock, only problem is it is not a great fit. The seal and diameter is correct however there is vertical play with the stock clip so there is never a tight seal because of the adapter wanting to lift up. Its as if 034 did not make the proper height for the adapter for the clip to hold the piece down. Is there any vertical play with your adapter because i would like to resolve this issue

I had the same problem but turned out my old O-Ring was toast. I put a new O-Ring in and it got rid of the play.

[Cassidy@Integrated]

[Cassidy@Integrated]

[NeverGiveUp]

Just received mine. It seems to be a very nice product.

However, the AN10 adapter is not provided. If I want to use a AN10 stainless steel braided hose, can you confirm that this is the adapter I need to buy (AN10 on the both sides)?

http://cgi.ebay.fr/AN-10-AN10-to-AN-...item255dcfaf71

[RobClubley]

I got mine a few days ago - looks good!

Here it is with an AN10 to AN12 adapter - I'm using AN12 braided hose.

[NeverGiveUp]

OK I thought to use a 10-AN hose from the crankcase to the valve cover and a 12-AN hose from the vavle cover to the catch tank.

What do you think?

Thanks for your picture.

[RobClubley]

As it's AN10 at the crankcase anyway I don't think it really makes much difference

[Neil patrick harris]

In most cases, the OEM o-ring is intact and can be reused.

O-rings should always be replaced if disturbed. Im sorry...

[Mr.V-Dub]

Will Be Ordering One Soon.

[Mr.V-Dub]

Ordered

[Dave@integrated]

O-rings should always be replaced if disturbed. Im sorry...

If you want to replace that o-ring we do offer them as an option.

[Dave@integrated]

Ordered

Great! Should work great for you

[Mr.V-Dub]

Great! Should work great for you

And It Does, My Good Sir
Thanks For The Good Deal, But Most Importantly, The Quality Piece.

[Vegeta Gti]

[DUBBED-OUT]

Well, it took me almost a year (11 mo+) to figure out my custom catch can setup.

I just ordered a valve cover & breather adapters.

Just wanted to say THANK YOU IE for offering these truly amazing not to mention very much needed parts.



-Stephen