VW Vortex - Volkswagen Forum banner
Status
Not open for further replies.

***South Bend Clutch Kits From BSH***

18K views 49 replies 8 participants last post by  Sales@BSH 
#1 · (Edited)
***South Bend Clutch Kits On Sale at BSH***







Heavy duty version of the stock O. E. clutch. The Pressure Plate has an increase clamp load for extended life. The disc is dual dampened for smooth engagement and increased transmission life. Premium friction material ensures rapid heat dissipation increasing the life of the clutch. Recommended for spirited and daily driving.



Stage 2 Daily

Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability. Recommended usage is daily, street and moderate race.

Stage 2 Endurance

An SFI approved single mass flywheel is recommended for this application to get optimal performance. This clutch system is designed for the racing climate. The pressure plate is precision balance for vibration free operation at high RPM. The pressure plate fulcrum is altered for a positive disengagement and a quick shift. The disc is engineered with a Dual Damped design to provide accurate control when accelerating through corners. The friction material is a hybrid using a full face Feramic (Sintered Iron) lining on the flywheel side and a high metal content Organic lining on the pressure plate side. Engagement is positive yet buffered due to the high graphite content unique to Ceramic facings. Recommended uses are daily and street with an emphasis on Rally and Endurance racing.

Stage 2 Drag

Drag racing requires a Single Mass SFI approved Flywheel to be included with each kit when the original design is Dual Mass. This system features a Heavy Duty Pressure Plate modified for a puck style disc with no cushion between the linings to keep the clutch pedal travel short and quick. The puck design disc reduces rotational mass and total drive surface area while increasing pounds per square inch on the surface of the friction material. This combination minimizes inertia, accelerating the transfer of torque from the engine to the wheels. The friction material used for this race application is Graphite Impregnated Ceramic. This compound exceeded all other friction materials when testing for durability, reduced chatter, heat transfer and torque capacity. Recommended uses are drag racing, drifting and limited street.



Stage 3 Daily

Recommended for single mass flywheel (SMF) when original design is DMF. This clutch package is designed for high HP vehicles desiring a start performance similar to O.E. The pressure plate is Race Engineered (SS) and SFI approved with significant load increase over stage 1,2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20%-25%. Discs are assembled with heat-treated wear resistant hubs; drive plates and springs for high load transfer and dependable operation. The sprung centers on the disc in conjunction with the marcel fin between the linings create a dual dampening effect that simulates O.E. start performance. A Performance Organic friction material with a high metal content increases torque and RPM capability and maintains low operating temperatures which reduces wear and glazing. Recommended usages are daily, spirited street and occasional track.

Stage 3 Endurance

Recommended for single mass flywheel (SMF) when original design is DMF to achieve optimal performance. This kit uses the same Race Engineered SFI approved pressure plate as stage 3 daily package. The disc is designed for the special needs of a vehicle with circuit racing in mind. Kevlar friction material is used for its unique static to dynamic ratios of friction co-efficient at high energy levels. This translates to a perfect transition from one gear to the next. Discs are assembled with only performance components and equipped with torsion springs functioning as a damper between engine and gearbox. Recommend usages are Rally, endurance race, club sport, autocross, street and daily.

Stage 3 Drag

Drag racing requires a Single Mass Steel Flywheel to be included with each kit when the original design is Dual Mass. This clutch package is built to handle heavily modified cars and designed to function according to the specific needs of the ¼ and 1/8th mile track. The pressure plate for this kit is SFI approved Race Cover engineered to disengage with less pedal travel shortening the shift time. Discs are a puck design, which reduces rotational mass and are assembled with all high carbon component pieces for maximum strength. The friction material used is Graphite impregnated Feramic perfectly suited for drag racing because of its maximum friction co-efficient, rapid heat dissipation and abrupt engagement characteristics. Recommended uses are drag, pulling, drifting.

All clutch kits come with lightweight flywheel, throw out bearing and all hardware needed for installation. Free shipping on all South Bend Clutch Kit orders in the lower 48 states. International shipping also available.



Ordering:
All website orders can be done directly through our site. Please just click any of the product links above to go directly to our site.

Phone:
Call us at (602) 606 7973 to place an order by phone

Payment:
We accept all major credit cards, Paypal, money orders and wire transfers. if you are interested in paying by money or wire transfer, Please call us at (602) 606 7973

Shipping:
All orders will be shipped FEDEX.
International orders are available, please contact us for shipping quotes.

Hours of operations:
Monday - Friday from 9AM to 5 PM
Saturday and Sunday we are closed but http://www.bshspeedshop.com is never closed!

Contact info:
Phone: (602) 606 7973
E-Mail: sales@bshspeedshop.com
AIM: salesatBSH
 
See less See more
6
#42 ·


Welcome back to the real world everyone from all of us at BSH Speedshop!

Today we are having our once a year Cyber Monday Special! Today and today only you will get our lowest prices of the year on BSH, Ksport, Devils Own, and Snow Performance products!

Intakes as low as $199!
Catch Cans as low as $199!
Engine Mounts under $150!
Ksport Coilovers for $877 shipped!

Tons of other deals on the products we offer.

For your late model VW we carry a full line of performance products, intakes, swaybars, intercoolers, catch cans, turbo kits and more! For today only, they are on mega sale!

Visit www.bshspeedshop.com where we accept Visa, Mastercard, Discover, Amex, and Paypal all through our secure site!

Most products available for immediate delivery, any shortages will be noted PRIOR to any credit card activity.

If you have any questions lets us know! Happy Shopping!

 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top