I installed the hockey puck yesterday. initial vibes took me by suprise, now I love it. glad I chose to drive it stock for awhile before doing this. makes me appreciate it more.![]()
#6861
^^^ I got the Dynaudio amp and RCD not RNS. Bluetooth options are next on my plate unless the Tampa mod sneaks in line.
#6862
I installed the hockey puck yesterday. initial vibes took me by suprise, now I love it. glad I chose to drive it stock for awhile before doing this. makes me appreciate it more.![]()
#6863
#6864
Shined her up and won another trophy. Best Watercooled VW at the VW - Porsche Reunion in Cincinnati
![]()
#6865
Killed millions of bugs in a 900km round trip during a weekend away in Mossel Bay, up the Garden Route of the eastern cape.....
Also suspected that sixteen10 visited one of the bars in Mossel Bay and left his calling card:
![]()
HOWIE-WP,RaceCar:1996 Citi Blues(MRP Auto 2.0L,Twin 45 Webers)
Tow Car:1996 VW Golf GTi
RoadCar:2008 VW Golf5 .:R32
OffRoad Car:1993 Land Rover Defender 110 V8
"Settle for nothing less than the object of your desire"-Bjork
#6868
HOWIE-WP,RaceCar:1996 Citi Blues(MRP Auto 2.0L,Twin 45 Webers)
Tow Car:1996 VW Golf GTi
RoadCar:2008 VW Golf5 .:R32
OffRoad Car:1993 Land Rover Defender 110 V8
"Settle for nothing less than the object of your desire"-Bjork
#6869
pic from R GTG @ H20
Whoever appeals to the law against his fellow man is either a fool or a coward. Whoever cannot take care of himself without that law is both. For a wounded man shall say to his assailant, "If I Die, You are forgiven. If I Live, I will kill you." Such is the Rule of Honor.
SHIFT
#6870
Enjoyed my daily commute with the Borla soundtrack after a failed install, followed by a successful install this weekend.
I would like to remind everyone (especially the younger demographic) to exercise caution when raising this pig of a car. Long story short, a mildly cut corner and small amount of carelessness resulted in a 1.5" long and 1/8" deep dent/gash in my passenger side skirt after a jack failure - a small price to pay in comparison to almost having the driver side dump into the side of a garage door like something you would see in a youtube video. Luckily nobody was injured and the blemish is the only reminder of what was a very scary situation.
Use ramps when possible, but never relax when rolling up due to the nature of the DSG.
UG
#6872
damn, tr looks gooood.
Holy Milltek.
Tarmacs cut it close.
Miami Vase
Cams A Make Her Dance
#6874
Last hand wash/wax of the season, probably. (lows in the 30s coming up this week)
![]()
#6875
VAG-com'd a bunch of stuff when my buddy left me his cable for the weekend
F2P on with high beams
enabled remote window open/close
enabled rain sensor rolling windows up
disabled TPMS warnings
disabled seatbelt chime
disabled door chime
"My car is a Wookie, your argument is invalid"
#6876
Just rolled over 40k on my way into work today.
And *tried* to drop her off for a Haldex switch install - only to be told it was next Wednesday. D'oh!![]()
#6877
Tried to figure out why my rear wiper won't automatically come on when I put the car in reverse in the rain. Thought it was supposed to do that if I had the wipers set to auto.
Also still can't figure out how the rain sensing windows work...I know mine are coded to be on, but I've never managed to get them to work.
And I noticed an odd buzzing noise when I started it up this morning but I just attributed it to the car being cold.
Last edited by Katie83; 10-04-2012 at 11:22 AM.
#6880
#6881
^ about the wipers. Though sometimes mine refuse to come on until I start moving. And every once in a while they come on for a single swipe with no rain present. If it happens, it's when it goes light/dark shadow/light due to trees or overpass. I just turn the sensitivity down and it's far less frequent.
#6882
oh yeah! a bit vibey at throttle tip in right off idle, otherwise it just feels tighter, wot shifts are cleaner and crisper. definitely a big improvement over the stock mount. But, if all you do is drive in stop an go traffic and don't really drive spirited, then your money would be better spent elsewhere. If you drive spirited frequently or all the time like me, DO IT.
#6883
#6884
2008 R32 | UM Software | C2/Custom Stage 5 | Jeff Atwood Approved
Vortex Thread | GolfMk5 Thread | Old Video | Old Video Compilation | IUM | I
Performance Leds
#6886
after the last 2 hour track day I smoked my turbo to manifold.. been working on getting them off little by little every night to run them on the mill and reinstall.
Douglas VW
Distributors for FFE Racing, GoAPR, CTSturbo, Integrated Engineering and HPA
Innovative Motorsports + UM
#6887
It had to happen. Spring comes soon enough, and with it comes WiTW 2013. Yayyyyyy.
Sorry dude.
So what did I do to my R today. Well today I start the next phase in my R's development and there are big things in store. I think it's new thread worthy. My old thread got stale.![]()
2008 R32 | UM Software | C2/Custom Stage 5 | Jeff Atwood Approved
Vortex Thread | GolfMk5 Thread | Old Video | Old Video Compilation | IUM | I
Performance Leds
#6890
Projekt German Auto Grüppe - German car entusiast club based in Iowa with members all over the Midwest
#6891
Projekt German Auto Grüppe - German car entusiast club based in Iowa with members all over the Midwest
#6892
08 DBP .:R32
92 Eagle Talon TSi
#6894
Alright so here is the story.... Girlfriend somehow scratched the weird black finish on the shifter console. After some cleaning I removed the original finish and brought the plastic down to its base. I went down to my local sticker/decal place and bought a 2' x 2' sheet of the turned aluminum vinyl. cost me like 15$. After taking apart the shifter bezel ( which is fairly straightforward) I laid the vinyl on half the side. Then started making a rough cut along the inside so the vinyl had room to flex. With this vinyl it doesn't have much room for flexing because it is foil based. Slowly cutting away at the excess with an xacto knife I trimmed it to fit. Same with the right hand side. the inner edge does not have to be perfect because that chrome ring covers it.
![]()
Last edited by Exodusx7x; 10-07-2012 at 01:06 PM.
#6895
Looks pretty decent. It would look perfect if the engine turned pattern was the same size as the stock pieces. I know, I'm being picky.
Originally Posted by heimbachae